SMART-AVI USB2Pro User manual

© Copyright 2008 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties
of merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.
USB2Pro Extends USB 2.0 Signals up to 325 Feet
via CAT5
USB2Pro
www.smartavi.com
User Manual
2840 N. Naomi Ave.
Burbank, California 91504
Phone: [phone]
Facsimile: [phone]
USB-2Pro Specifications
Range (over Cat-
egory 5 UTP solid
core cable)
100 meters Maximum range 325ft (85m)
USB device sup-
port
High-speed devices (480 Mb/s) Full speed
devices (12 Mb/s) Low speed devices (1.5
Mb/s)
USB device sup-
port
High-speed devices (480 Mb/s) Full speed
devices (12 Mb/s) Low speed devices (1.5
Mb/s)
USB host support EHCI (USB 2.0)
Power Supply for RX only5 V DC, 3 A
Transmitter Unit 1 x USB Type B
1 x RJ45
Receiver Unit 1 x RJ45
4 x USB Type A
RX Unit Dimen-
sions
114mm x 106mm x 38mm
4.5” x 4.2” x 1.5”
RX Unit Wieght 440: 0.32 kg (0.7 lb
Technical Specifications

Q
t
y
Descri
p
tio
n
P
a
r
t
N
u
m
be
r
1
US
B
2
Pr
o
Tr
a
n
s
mi
tte
r
US
B-
2
Pr
o
T
X
1
US
B
2
Pr
o
R
ece
iv
er
US
B-
2
Pr
o
R
X
1
PowerSupply5V3A P
S5
VD
3
A
US
The USB2Pro supports all USB 2.0 high-speed devices,
from keyboards to digital cameras and will operate
on Windows®, Mac and Linux® operating systems.
An integrated four-port hub allows for multiple
devises to be connected to the USB2Pro at once.
Additional USB hubs can be added, increasing the
amount of devices that can be plugged into the USB2-
Pro.
I
ntroduction
6XSSRUWV86%DQG'HYLFHV
:RUNVRQ:LQGRZV0DFDQG/LQX[2SHUDWLQJ
Systems
,QWHJUDWHG)RXU3RUW+XE
%XV3RZHUHG/RFDO8QLW
3RZHU$GDSWHUIRU5HPRWH8QLW
3OXJDQG3OD\
F
eatures
W
hat’s in the box
?
USB2Pro
Please check the contents of the package before
beginning installation.
Installation and O
p
eration
Connecting the Transmitter
1. Connect the transmitter to the host using the USB
cable (included with the unit).
2. The A side of the connector would go to the com-
puter host and the B side would be connected to
the transmitter.
Note:
The receiver provides remote power up to 500
mA to the connected peripherals. This power comes
from the host computer and is passed by the transmitter
to the receiver. In some applications, and external power
supply is required. SmartAVI can provide a power supply
for such cases with the receiver and transmitter units.
US
B
C
amera
USB2Pro RX
Receive
r
Preparing & Connecting System CAT5 Cable
Following is the wiring standard for terminating CAT 5 cable
using RJ-45 connector:
Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8
Connectors: RJ-45
Capacitance: 14 pf/ft (46.2 pf/m)
Conductor Gauge: 24 AWG
Impedance: 100 +/- 15 ohms
4 - Pair