SMART-AVI USB2-MAX User manual

USB 2.0 Extender over CAT5
EXTENDS USB 2.0
UP TO 330 FEET
OVER CAT5 CABLE
Quick Start Guide
USB
Signal Type USB 2.0
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (4) USB Type A (Female)
OTHER
Power External 100-240 VAC/5VDC2A
Dimensions 3.625” W x 1” H x 3” D
Weight 1.5 lb
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
(888)-994-7427, (702)-800-0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
USB2-MAX
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
USB2-MAX-TX 1 USB 2.0 over CAT5 Transmitter
USB2-MAX-RX 1 USB 2.0 over CAT5 Receiver
PS5VD2A 2 PS5VD2A Power Supply
Quick Start
Guide 1

OVEVIEW
SmartAVI’s USB2-MAX extends standard USB (Universal
Serial Bus) 2.0 signals up to 330 feet (100 meters) using
a single CAT5 cable. The USB2-MAX supports all USB 2.0
high-speed devices, from keyboards to digital cameras
and will operate on Windows®, Mac and Linux® operating
systems. An integrated four-port hub allows for multiple
devices to be connected to the USB2-MAX at once.
Additional USB hubs can be added, increasing the amount
of devices that can be plugged into the USB2-MAX.
FEATURES
• Supports all USB 2.0 and1.1 Devices Transparently
(Flash Drives, Printers, Cameras, Scanners, etc.)
• Supports USB 1.1 keyboard and mouse
• Works on Windows, Mac and Linux Operang
Systems
• Integrated Four-Port Hub
• Bus-Powered Local Unit
• Power Adaptor for Remote Unit
• Plug-and-Play
1. Power off all devices.
2. Connect the USB source (computer) to the USB port on the front of the USB2-MAX Transmitter.
3. Connect the USB2-MAX Transmitter to the USB2-MAX Receiver with a CAT5 cable using the front ports.
4. Connect up to 4 USB 2.0 devices to the rear ports on the USB2-MAX Receiver.
5. Power on the USB2-MAX Transmitter and Receiver by plugging the AC Adapter into the front ports of the unit.
6. Power on the computer and USB devices.
HARDWARE INSTALLATION
< • • • >
USB2-MAX
Receiver
< • • • >
USB2-MAX
Transmitter
Up to 330 feet
VIDEO
USB IN
USB OUT
LINK
USB2-MAX-TX Front
USB2-MAX-RX Front
USB2-MAX-TX Back
USB2-MAX-RX Back