SMART-AVI LDX User manual

Long Range DVI-D and RS-232
Extender
DVI-D AND RS-232 EXTENDER
OVER CAT5E/6 USING HDBASET
UP TO 245 FT
Quick Start Guide
VIDEO
Format DVI-D Single Line
Maximum pixel clock 165 MHz
Input interface (TX) (1) DVI-D 29-pin female
Output interface (RX) (1) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @ 60 Hz
DDC 5 volts p-p (TTL)
Input equalization Automatic
Input cable length Up to 20 ft
Output cable length Up to 20 ft
RS-232
Input interface (TX) (1) DB9 (Female)
Output interface (RX) (1) DB9 (Female)
Speed Up to 115 Kbps
IR CONTROL
Input Interface (TX) (1) 3.5 mm (Female)
Output Interface (RX) (1) 3.5 mm (Female)
Frequency Response 30 KHz to 80 KHz
OTHER
Power External 100-240 VAC/5VDC4A
Dimensions 5.125 in W x 1 in H x 3.625 in D
Weight 1 lb (.5 lbs per unit)
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
LDX
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
LDX-S 1 DVI-D and RS-232 Extender
PS5VDC2A 2 PS5VD2A Power Supply
Quick Start Guide 1

ABOUT SFX
Using HDBaseT technology, the LDX DVI extender is
capable of sending a DVI-D signal up to 245 ft over a single
conventional and inexpensive Cat5e/6 cable. HDBaseT
technology is superior to older DVI extenders that require a
special Cat6 shielded cable to go a short distance. The LDX
extender also features RS-232 signal extension, enabling
long-distance control of displays or devices.
FEATURES
• Extends DVI-D up to 245 ft from the Source
• Data Recovery for Digital Video
• Supports up to 1920x1200 Digital Video Resolution
(@ 60 Hz)
• Supports 4K/2K (3840x2160) video resolution
(@ 30 Hz)
• Automatic DDC Learning
• Uncompressed Video Using HDBaseT
• RS-232 Extension Enables Long-Distance Control
• External Power Adapter for Transmitter and
Receiver Unit
• Plug-and-Play Ready
1. Turn off connected devices
2. Connect cables between signal source device and TX unit’s input ports
3. Connect cables between the RX unit’s output ports and end-point device
4. Connect TX and RX via CAT5e/6 cable
5. Connect power supply to either TX and RX units
6. Turn on TX and RX units
7. Return power to connected devices
SFX-TX FRONT
SFX-TX BACK SFX-RX BACK
SFX-RX FRONT
HARDWARE INSTALLATION
DVI-D IN
DVI-D OUT
RS232 IN
RS232 OUT
CAT5E/6 CABLE
LDX-TX
DVI-D, RS232 and IR Extender
HDBaseT - Transmitter
DVI-D IN
RS232
5VDC
CAT5 UTP
IR OUT
Made in U.S.A.
LDX-TX
DVI-D, RS232 and IR Extender
HDBaseT - Receiver
DVI-D OUT
RS232
5VDC
CAT5 UTP
IR OUT
Made in U.S.A.
245 ft