SMART-AVI SFX-2P User manual

2-Port DVI-D & USB 2.0
Fiber Extender
DUAL DVI-D, STEREO AUDIO,
USB 2.0/1.1, RS-232
MULTIMODE FIBER EXTENDER
UP TO 1,500 FT
Quick Start Guide
VIDEO
Format DVI-D Single Line
Maximum pixel clock 165 MHz
Input interface (TX) (2) DVI-D 29-pin female
Output interface (RX) (2) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @ 60 Hz
DDC 5 volts p-p (TTL)
Input equalization Automatic
Input cable length Up to 20 ft
Output cable length Up to 20 ft
RS-232
Input interface (TX) (1) DB9 (Female)
Output interface (RX) (1) DB9 (Female)
Speed Up to 115 Kbps
USB
Signal type EHCI (USB 2.0)
and OHCI/UHCI (USB 1.1)
Input interface (TX) (1) USB type B (female)
Output interface (RX) (4) USB type A (female)
AUDIO
Signal type Stereo audio
Bandwidth 15 MHz, 0 dB
Impedance 10 kOhm
Connector 3.5 mm stereo mini female
OPTICAL
Fiber type Duplex, multi mode
Connector type Duplex LC
Wavelength 1310 nm/1550 nm
(dual wavelength)
Data rate 2x2.5 Gbps
(2.5 Gbps per single wavelength)
Transmission power -5 dB min
Receiver sensitivity -21 dB max
Distance 500 m max
OTHER
Power Supply Internal 100-240 VAC
Dimensions 17” W x 1.7” H x 7” D
Weight 8 lbs
Operating temp. 32-131 °F (0-55 °C)
Storage temp. -4-185 °F (-20-85 °C)
Humidity Up to 95% (non-condensing)
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
SFX-2P
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
SFX-2P-M-S 1
Dual DVI-D, Audio, USB
and RS-232 Multimode
Fiber Extender.
CCPWR06 2 6’ Power Plug Cable
Quick Start Guide 1

ABOUT SFX-2P
The SFX-2P is a perfect solution for extending 2 DVI-D and
USB 2.0 signals from a computer in a remote location up
to 1,500 feet away. It supports high-resolution DVI-D video
and all USB device types from high-speed web cams, hard
drives, printers, scanners, audio devices, touch screens,
digital cameras and game controllers.
The SFX-2P is immune to electromagnetic interference,
making it ideal for use in situations where there is
considerable interference. The SFX-2P is also very secure
because it’s ber optic signals cannot be easily
tapped.
FEATURES
• Top signal quality at maximum extension over
multimode ber (1,500 ft) plug type LC
• DVI-D Video Resolutions
up to 1920 x 1200 WUXGA at 60Hz
• DDC Learning
• Supports USB 1.1 (12 Mbps)
and USB 2.0 (480 Mbps) data rates
• Supports all USB device types transparently (no
emulation)from high-speed web cams, hard drives,
printers, scanners, audio devices, touch screens,
game controllers and more Integrated Four-Port Hub in
the receiver
• Compatible with all operating systems
• Extends Stereo Audio
• Extends RS-232
• Plug and play
1. Turn off connected devices
2. Connect cables between signal source device and TX unit’s input ports
3. Connect cables between the RX unit’s output ports and end-point device
4. Connect TX and RX via CAT5e/6 cable
5. Connect power supply to either TX and RX units
6. Turn on TX and RX units
7. Return power to connected devices
SFX-TX2P FRONT
SFX-TX2P BACK
SFX-RX2P FRONT
SFX-RX2P BACK
HARDWARE INSTALLATION
1,500 ft
DVI-D IN
DVI-D OUT
USB IN
USB OUT
AUDIO IN
AUDIO OUT
FIBER (VIDEO LINK)
FIBER (USB LINK)
DVI-D1
RS232
DVI-D2
DVI-D3
AUDIO
SmartAVISFX-TX2P
www.smartavi.com
Madein the USA
USB 2.0 HOST
ACTIVITY POWER
110-240V
SFX-TX2P
DVI-D4
DVI-D1
RS232
DVI-D2
AUDIO
SmartAVISFX-RX2P
www.smartavi.com
Madein t he USA
USB 2.0
HOST
ACTIVITY
SFX-RX2P
POWER
110-240V
DVI-D3 DVI-D4