SMART Board 7000R Series User manual

Was this document helpful?
smarttech.com/docfeedback/171539
Cover
SMARTBoard®
7000Rand7000RProseries
interactive displays
USER GUIDE
SBID-7275R |SBID-7286R |SBID-7275R-P |SBID-7286R-P
SBID-7075R |SBID-7086R |SBID-7075R-P |SBID-7086R-P
IDR775-1 |IDR786-1

smarttech.com/kb/171539 2
Learn more
This guide and other resources for SMARTBoard 7000R and 7000R Pro series
interactive displays are available in the Support section of the SMARTwebsite
(smarttech.com/support). Scan this QRcode to view these resources on your mobile
device.
Licenses
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by SMARTTechnologiesULC is under license.
Trademark notice
SMARTBoard, SMARTNotebook, SMARTTeamWorks, SMARTMeetingPro, SMARTInk, SMARTAudio, HyPr Touch, Silktouch, Object Awareness, Pen ID, smarttech, the SMART
logo and all SMART taglines are trademarks or registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. Microsoft and Windows are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Google, Google Play, Android and Chromebook are trademarks of Google Inc. All
other third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2021SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any
language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change without notice and does not
represent a commitment on the part of SMART.
This product and/or use thereof is covered by one or more of the following U.S. patents:
www.smarttech.com/patents
November 25, 2021

smarttech.com/kb/171539 3
Important information
NOTE
Refer to the SMARTBoard 7000R and 7000R Pro series
interactive displays installation and maintenance guide
(smarttech.com/kb/171538) for important information about
installing and maintaining the display.
STABILITY HAZARD
If not installed properly, this display may fall causing serious
injury or death. To prevent injury, the display must be securely
attached to the wall following the installation instructions.
WARNING
lDo not open or disassemble the display. You risk
electrical shock from the high voltage inside the casing.
Opening the casing also voids the warranty.
lDo not stand (or allow children to stand) on a chair to
touch the surface of the display.
lTo reduce the risk of fire or electric shock, do not
expose the display to rain or moisture.
lDo not insert objects inside the cabinet ventilation
holes, because they could touch dangerous voltage
points and cause electric shock, fire, or product damage
which may not be covered by the warranty.
lDo not place heavy objects on the power cable.
Damage to the cable could cause shock, fire, or product
damage which may not be covered by the warranty.
lIf the glass is broken, do not touch the liquid crystal. To
prevent injury, handle glass fragments with care when
disposing of them.
lDisconnect all of the display’s power cables from the
wall outlet and seek assistance from qualified service
personnel if any of the following occur:
oThe power cable or plug is damaged
oLiquid is spilled into the display
oObjects fall into the display
oThe display is dropped
oStructural damage, such as cracking, occurs
oThe display behaves unexpectedly when you
follow operating instructions
ENERGYSTAR®
ENERGY STAR is the government-backed symbol
for energy efficiency, providing simple, credible,
and unbiased information that consumers and
businesses rely on to make well-informed
decisions. ENERGY STAR-certified products are
the simple choice for energy efficiency, making it
easy for consumers and businesses to make purchases that save
them money and protect the environment. The U.S. EPA ensures
that each product that earns the label is independently certified
to deliver the quality, performance, and savings that users have
come to expect.
As shipped, your display delivers ENERGY STAR performance
and savings. However, changing some settings may increase
energy consumption beyond the limits required for ENERGY
STAR certification. For example, increased brightness and
contrast will increase power consumption.
Please consider the environment when you choose non-
ENERGY STAR settings.
Federal Communication Commission
interference statement
FCC
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: IDR775-1, IDR786-1, IDRMOD1, PR7-1
Responsible Party – U.S. Contact Information
SMART Technologies Inc.
2401 4th Ave., 3rd Floor
Seattle, WA 98121
[email protected]
The FCC and ISED registration numbers and warnings can be
found through the Settings screen under the Regulatory tab.
Regulatory
Model:
IDR775-1
Regulatory
Model:
IDR786-1
Regulatory
Model:
PR7-1

Important information
smarttech.com/kb/171539 4
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Regulatory
Model:
IDRMOD1
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired operation
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Restriction
This device is restricted to indoor use when operated in the 5.15
to 5.25 GHz frequency range.
IEEE 802.11b or 802.11g operation of this product in the USA is
firmware limited to channels 1 through 13.
Radiation exposure statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between
the radiator and your body. The PEN can be used with 0cm
separation distance between the pen and your body.
Innovation, Science and Economic
Development Canada statement
The FCC and ISED registration numbers and warnings can be
found through the Settings screen under the Regulatory tab.
Regulatory
Model:
IDR775-1
Regulatory
Model:
IDR786-1
This device complies with ICES-003 of the Innovation, Science
and Economic Development Canada Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
Regulatory
Model:
PR7-1
This device complies with Industry Canada’s RSS-310. Operation
is subject to the condition that this device must not cause
harmful interference and must accept any interference, including
interference that may cause undesired operation of the device.
98-305kHz: <30dBuV/A @10m

Important information
smarttech.com/kb/171539 5
Regulatory
Model:
IDRMOD1
This device complies with ICES-003 of the Innovation, Science
and Economic Development Canada Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION
(i) the device for operation in the band 5150–5250 MHz is only
for indoor use to reduce the potential for harmful interference
to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the
bands 5250–5350 MHz and 5470–5725 MHz shall comply
with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the
band 5725–5825 MHz shall comply with the e.i.r.p. limits
specified for point-to-point and non point-to-point operation
as appropriate.
(iv) Users should also be advised that high-power radars are
allocated as primary users (i.e., priority users) of the bands
5250–5350 MHz and 5650–5850 MHz and that these radars
could cause interference and/or damage to LE-LAN devices.
Radiation exposure statement
This equipment complies with ISED radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20 cm between
the radiator and your body. The PEN can be used with 0cm
separation distance between the pen and your body.
Innovation, Science et Développement
économique Déclaration du Canada
AVERTISSEMENT
(i) les dispositifs fonctionnant dans la bande 5150–5250 MHz
sont réservés uniquement pour une utilisation à l’intérieur afin
de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs
utilisant les bandes 5250–5350 MHz et 5470–5725 MHz
doit se conformer à la limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs
utilisant la bande 5725–5825 MHz) doit se conformer à la
limite de p.i.r.e. spécifiée pour l’exploitation point à point et
non point à point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi être avisés que les
utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les
bandes 5250–5350 MHz et 5650–5850 MHz et que ces
radars pourraient causer du brouillage et/ou des dommages
aux dispositifs LAN-EL.
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux
rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre
corps. Le PEN peut être utilisé avec une distance de séparation
de 0 cm entre le stylo et votre corps.
EU declaration of conformity
Hereby, SMART Technologies ULC declares that the radio
equipment type Interactive WiFi Module IDRMOD-1 and the
interactive pen PR7-1 are in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
smarttech.com/compliance
The frequency band and the maximum transmitted power in EU
are listed below:
PR7-1
98-305kHz: <30dBuV/A @10m
IDRMOD1
2400MHz – 2480MHz: 19dBm (EIRP) 5150MHz – 5850MHz:
13dBm (EIRP)
Restrictions in
BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/IT/CY/LV/LT/LU/HU/MT/NL
/AT/PL/PT/RO/SI/SK/FI/SE/UK/TR/NO/CH/IS/LI. 5150MHz-
5350MHz is for indoor use only.
CAUTION: EXPOSURE TO RADIO FREQUENCY
RADIATION
This equipment complies with EU radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20 cm
between the radiator and your body. The PEN can be used
with 0cm separation distance between the pen and your
body.
For optimal performance any support equipment connected to
this device must be CE compliant

smarttech.com/kb/171539 6
Contents
Important information 3
Chapter 1: Welcome 8
About this guide 8
About the display 9
Identifying your specific model 14
Accessories 14
More information 15
Chapter 2: Using basic features 16
Waking up the display and putting it back in to an energy saving mode 16
Using the Home button 17
Using the convenience panel 18
Using the remote control 19
Using touch 21
Using the pens and erasers 23
Adjusting the volume 25
Freezing or hiding the screen 26
Chapter 3: Using the iQ apps 28
Using the Apps Library 28
Using the Files Library 29
Using SMARTWhiteboard 29
Using Browser 29
Using Screen Share 29
Using Input 30
Using screenshots 30
Installing third-party apps 30
Cleaning up the display 30
Using kapp Whiteboard 31
Chapter 4: Connecting computers and other devices 32
Installing and using SMART software 32
Connecting room computers and guest laptops 34
Connecting a SMART OPS PC module 40
Connecting USB drives, peripherals, and other devices 41
Chapter 5: Troubleshooting 43
The display isn’t turning on 43

Contents
smarttech.com/kb/171539 7
The display is turning on when it shouldn’t 44
The screen is blank or there’s a problem with the image on the screen 44
There’s no sound or there’s a problem with the sound 46
Touch isn’t working as expected 47
The pens and erasers aren’t working as expected 47
iQ apps aren’t working as expected 48
SMART software on connected computers isn’t working as expected 48
The SMART OPS PC module isn’t working as expected 49
Contacting your reseller for additional support 49

Chapter 1
smarttech.com/kb/171539 8
Chapter 1: Welcome
About this guide 8
About the display 9
Touch 9
Writing, drawing, and erasing 10
iQ experience 10
Display 10
Audio 11
Network connectivity 11
Room computers and guest laptops 11
Accessory slot 11
Convenience panel 12
Proximity sensors 12
Ambient light sensor 13
Remote control and IRsensor 13
Mounting hardware 13
Identifying your specific model 14
Accessories 14
SMART OPS PC module 15
Stands 15
USB extenders 15
More information 15
This chapter introduces the SMARTBoard® 7000R and 7000R Pro series interactive displays.
About this guide
This guide explains how to use a SMARTBoard 7000R or 7000R Pro series interactive display.
This guide is intended for people who use displays in their organizations. Other documentation and
resources are available for those who install and maintain displays (see More information on page15).

Chapter 1
Welcome
smarttech.com/kb/171539 9
About the display
The SMARTBoard 7000R or 7000R Pro series interactive display is a powerful but easy-to-use collaboration
tool that you can use to achieve better outcomes.
The display includes an extensive set of features and components.
Touch
You can do everything on the display that you can do at your computer—open and close applications, meet
with others, create new documents or edit existing ones, visit websites, play and manipulate videos, and so
on—by touching the display’s surface.
You can use an array of gestures within applications, including panning, scaling, rotating, and zooming in
and out.
The display’s HyPr Touch™ with EMR technology provides industry-leading touch and digital ink
performance, resulting in virtually no lag and zero contact detect height. In addition, its Silktouch™ ultra-
smooth finish allows you to use the display for hours without finger burn.
For more information, see Using touch on page21.

Chapter 1
Welcome
smarttech.com/kb/171539 10
Writing, drawing, and erasing
The display comes with black, red, blue, and green pens, which you can
use to write or draw on the screen.
In addition to the pens, the display includes two erasers, which you can
use to erase digital ink on the screen.
With Object Awareness™, the display responds automatically to the tool
or object you’re using, whether it’s a pen, finger, eraser, or palm. The
display’s Pen ID™ and Simultaneous Tool Differentiation technologies
allow four people to write independently and simultaneously, using
different colored ink.
For more information, see Using the pens and erasers on page23.
iQ experience
If enabled, the iQ embedded computer provides one-touch access to collaborative tools, such as a
whiteboard, wireless screen sharing, and a web browser. There’s no need for wires, cables, or manual
software and firmware updates.
NOTE
Some network integration is required for features like Browser and Screen Share.
Tap the Home button on the display (pictured) or the remote control to open the
Home screen (if iQ is enabled) or the Input screen (if iQ is disabled). From the Home
screen, you can open the iQ apps, switch inputs, and adjust settings.
For more information about the Home button and the Home screen, see Using the
Home button on page17.
For more information about the iQ apps, see Chapter 3: Using the iQ apps on page28.
Display
The 4K ultra-high-definition LED display provides optimal image clarity and wide viewing angles.

Chapter 1
Welcome
smarttech.com/kb/171539 11
The size of the display varies by model:
Models Size (diagonal)
SBID-7275R, SBID-7275R-P, SBID-7075R, and SBID-7075R-P 75"
SBID-7286R, SBID-7286R-P, SBID-7086R, and SBID-7086R-P 86"
Audio
The display includes two 15 W integrated speakers, which are designed to provide sound at the front of a
room.
Network connectivity
The display requires a network connection for downloading software and firmware updates, and a number
of the iQ apps require a network connection as well.
You can connect to a network using the Wi-Fi module or the LAN RJ45 jack on the display:
lThe Wi-Fi module supports both 2.4 and 5 GHz bands.
lThe two RJ45 jacks allow you to connect the display and an external device, such as a computer, to a
Gigabit Ethernet network.
Room computers and guest laptops
You can connect room computers and guest laptops and use the display to view and interact with them.
The display comes with SMART software that you can install on connected computers to take full advantage
of the display’s features while using the connected computers.
For more information, see Chapter 4: Connecting computers and other devices on page32.
Accessory slot
You can install an OPS-compatible device, such as a SMART OPS PC module, in the accessory slot.
SMARTOPS PC modules provide a complete Windows® 10 Pro installation.
For more information on SMART OPS PC modules, see SMART OPS PC module on page15.

Chapter 1
Welcome
smarttech.com/kb/171539 12
NOTE
Unlike with older SMARTBoard interactive displays, you don’t need to install an AM30, AM40, or AM50
appliance in the accessory slot to use the iQ experience on SMARTBoard 7000R and 7000R series
displays. The iQ experience is embedded on these displays (see iQ experience on page10). For this
reason, SMART doesn’t recommend installing AM30, AM40, or AM50 appliances in these displays’
accessory slots.
Convenience panel
The convenience panel contains buttons for turning the display on and off,
controlling the volume, freezing and unfreezing the screen, and showing and
hiding a screen shade. It also includes connectors for USB peripherals and a
computer or other input source.
For more information about the convenience panel, see Using the
convenience panel on page18.
Proximity sensors
The proximity sensors are located in the top-left and top-right corners of the
display’s frame.
The proximity sensors can detect people up to 16' (5 m) away when the display
is in an energy saving mode.
When the proximity sensors detect people in the room, the display turns on,
depending on how it’s configured.
If the room is empty for 60 minutes, the display returns to an energy saving
mode.
NOTES
lFor more information on energy saving modes, see the SMARTBoard 7000R and 7000R Pro series
interactive displays installation and maintenance guide (smarttech.com/kb/171538).
lThe proximity sensors respond only when the display is in the networked standby power state. They
do not respond in the standby power state.

Chapter 1
Welcome
smarttech.com/kb/171539 13
For more information, see Waking up the display and putting it back in to an energy saving mode on
page16.
Ambient light sensor
The ambient light sensor is located in the top-right corner of the display’s
frame.
The ambient light sensor detects the brightness of the room and adjusts the
screen’s brightness accordingly.
Remote control and IRsensor
You can use the remote control to turn the display on and off, adjust display
settings, and so on.
The IR sensor for the remote control is located in the top-left corner of the
display’s frame.
For more information about the remote control, see Using the remote control on
page19.
Mounting hardware
The display comes with a WM-SBID-200 wall mount, which your organization can use to mount the display
on a wall.
Alternatively, you can mount the display on a wall or mobile stand (see Accessories on the next page).

Chapter 1
Welcome
smarttech.com/kb/171539 14
Identifying your specific model
SMART offers different models of the SMARTBoard 7000R and 7000R Pro series interactive display:
Model Frame style Screen size
(approximate)
iQ
SBID-7275R White 75" Yes
SBID-7286R White 86" Yes
SBID-7275R-P Black 75" Yes
SBID-7275R-PW White 75" Yes
SBID-7286R-P Black 86" Yes
SBID-7286R-PW White 86" Yes
SBID-7075R White 75" No
SBID-7086R White 86" No
SBID-7075R-P Black 75" No
SBID-7075R-PW White 75" No
SBID-7086R-P Black 86" No
SBID-7086R-PW White 86" No
Refer to the specifications for detailed technical information for these models, including product dimensions
and weights (see More information on the next page).
Accessories
Accessories for the display include:
lSMART OPS PC module
lStands
lUSB extenders
NOTE
For more information about these and other accessories, see smarttech.com/accessories.

Chapter 1
Welcome
smarttech.com/kb/171539 15
SMART OPS PC module
SMART Open Pluggable Specification (OPS) PC modules provide a hassle-free
Windows 10 Pro installation based on eighth generation Intel® Core™ processors
and are designed specifically to work with a SMART display. All OPS PC modules
are WHQL certified and fully licensed with Windows 10 Pro. Install the OPS PC
module in a display’s OPS slot to provide a complete 4K UHD Windows 10
installation at your fingertips, without the need for an external PC or additional
cables.
Install familiar Windows applications, such as SMARTNotebook®,
SMARTTeamWorks™, and SMARTMeetingPro® software, and access the internet directly through your
display’s network connection. Upgrades and service for the OPS PC module are easy to perform without
removing the display from its mounting.
Stands
If you want to move the display from place to place, you can install it on a SMART mobile stand. If you are
installing the display on a wall that cannot support the display’s full weight, you can install the display on a
SMART floor stand.
USB extenders
As noted in the display’s specifications, the USB connection between the display and computer should be
no longer than 16'(5m). If you need to connect a computer that is more than 16' (5 m) from the display, use
the USB-XT extender (smarttech.com/kb/119318).
NOTE
For more information about extending USB connections, see USB cable extenders.
More information
In addition to this guide, SMART provides other documents for the display in the Support section of the
SMART website (smarttech.com/support). Scan the QR code on the cover of this guide to view links to
SMARTBoard 7000R and 7000R Pro series interactive display documents and other support resources.

Chapter 2
smarttech.com/kb/171539 16
Chapter 2: Using basic features
Waking up the display and putting it back in to an energy saving mode 16
Using the Home button 17
Using the convenience panel 18
Using the remote control 19
Using touch 21
Using the pens and erasers 23
Pairing the pens with the display 23
Writing and drawing in digital ink 23
Using the SMART Ink dynamic (floating) toolbar 24
Changing a pen’s default color, thickness, and other properties 24
Determining a pen’s status 25
Erasing digital ink 25
Adjusting the volume 25
Freezing or hiding the screen 26
Freezing the screen 26
Showing and hiding the screen shade 26
Waking up the display and putting it back in to an
energy saving mode
The display’s proximity sensors can detect people up to 16' (5 m) away when the display is in an energy
saving mode. Depending on how the display is configured, it either turns on or enters Ready mode when the
sensors detect people.
If the display is in Ready mode, you can turn it on in a number of ways:
lPress the Power button on the convenience panel or the remote control.
lPick up a pen or the eraser.
The display returns to an energy saving mode when one of the following occurs:
lThe sensors detect no motion in the room for 60 minutes.
lYou press the Power button on the convenience panel or the remote control.

Chapter 2
Using basic features
smarttech.com/kb/171539 17
The display remains in this energy saving mode until all pens are fully charged. The display enters a full
energy saving mode after all pens are fully charged and the sensor or sensors don’t detect anyone in the
room.
For information about turning off the display, see the SMARTBoard 7000R and 7000R Pro series interactive
displays installation and maintenance guide (smarttech.com/kb/171538).
Using the Home button
You can use the Home screen to open and use iQ apps, view the input of connected computers, and more.
You can also change the background and personalize other features of the Home screen. To learn more
about the Home screen, see Understanding the Home screen.
The Input screen shows thumbnails of connected computers and allows you to switch among inputs.
You can return to the Home screen or the Input screen at any time by following the instructions below.
To show the Home screen or the Input screen
Tap the Home button below the screen.
OR
Press the Home button on the remote control.

Chapter 2
Using basic features
smarttech.com/kb/171539 18
Using the convenience panel
The convenience panel contains buttons for turning the display on and off, controlling the volume, freezing
and unfreezing the screen, and showing and hiding a screen shade. It also includes connectors for USB
peripherals and a computer or other input source.
No. Name Procedure
1 Power lPress to wake the display or put it back to sleep (see Waking up the
display and putting it back in to an energy saving mode on page16).
lPress and hold for four seconds to turn off the display.
lPress and hold for 10 seconds to reset the display.
2 Volume increase Press to increase the volume (see Adjusting the volume on page25).
3 Volume decrease Press to decrease the volume (see Adjusting the volume on
page25).
4Freeze Press to freeze and unfreeze the screen (see page26).
5Screen shade Press to hide screen contents behind a screen shade (see Showing
and hiding the screen shade on page26).
6 USB Type-A
receptacle (×2)
Connect USB drives, peripherals, and other devices (see Connecting
USB drives, peripherals, and other devices on page41).
7 HDMI 4 input
source connectors
Connect a computer or other input source to use with the display
(see page34).
8 USB Type-C input
source connector
Connect a computer or other input source to use with the display
(see page34).

Chapter 2
Using basic features
smarttech.com/kb/171539 19
NOTE
The Power button indicates the display’s status:
Power button Display status
Off Not receiving power
Amber In an energy saving mode
White In normal operating mode
Using the remote control
The display comes with one of two infrared remote control models. These models are similar, except one
has a screen sharing button.
Use the infrared remote control to turn the display on or off, change the input source, change the volume,
access the display’s iQ apps, and more. You can also use the remote control to open the on-screen menus
and change the display’s settings.
IMPORTANT
lDo not subject the remote control to strong shock.
lKeep the remote control away from liquids. If it gets wet, wipe it dry immediately.
lDo not expose the remote control to heat or steam.
lDo not open any part of the remote control other than the battery compartment.
The image and table below list the remote control’s functions.

Chapter 2
Using basic features
smarttech.com/kb/171539 20
No. Name Procedure
1Power lPress to wake the display or put it back to sleep (see Waking up the
display and putting it back in to an energy saving mode on page16).
lPress and hold for four seconds to turn off the display.
lPress and hold for 10 seconds to reset the display.
2 Home Open the Home screen or the Input screen (see Using the Home
button on page17).
3 Up and down
buttons
Select a menu option in the settings.
4 OK Select menu option in the settings.
5 Left and right
buttons
Change the value of the selected setting.
6 Back Go one step back in the navigation history.
7 Input Switch input sources (see Viewing a connected computer’s input on
page38).