Smartenit Harmony P2 User manual

2014 Compacta International, Ltd. - Rev. 9/14
Harmony P2, iSmartenit, and Smartenit are trademarks of Compacta Intl. Ltd.
INSTEON is a registered trademark of SmartLabs, Inc. X10 is a registered trademark of X10.
(#6007E & #6007F)
[phone]
Technical Support
Smartenit.com
Quick Start Guide - Harmony P2 Model #6007C
Product Brief
Installation
Home Automation Gateway
Set-up
Ethernet PowerUSB Port
Your Harmony P2 is a stand-alone home automaon
gateway that oers control of your compable ZigBee Home
Automaon (HA), INSTEON, X10 and WiFi devices from any
computer or smart phone (Android or iOS) connected to the
Internet.
The Harmony P2 is compable with 3 interfaces. Choose the
USB-CID for compability with ZigBee HA only, the EZIComm
for INSTEON/X10 only, or the ZBPLM to support all 3 protocols.
With the iSmartenit app, setup and control of your devices
has never been easier! Remote access to control your
devices on demand and/or set up automated schedules
based on a variety of condions can all be handled via
iSmartenit.
iSmartenit is available on either the Google Play or the iTunes
Stores. Search keyword “iSmartenit”.
1. Connect your interface (USB-CID, EZIComm* or ZBPLM*) to USB Port
* When connecng to EZIComm or ZBPLM, use USB cable provided to connect to USB port
2. Using the Ethernet cable provided, plug one end into your Ethernet
switch/router and the other end into your Harmony P2.
Note: If you need a longer cable, use a straight-through patch cable, not a cross-over cable.
3. Connect your Harmony P2 to power with the supplied 12V DC
power supply.
As updates are made for the best user experience, please visit our Wiki to get the most recent “how-to” instrucons for using
the iSmartenit applicaon with your Gateway.
iSmartenit Wiki - hp://wiki.smartenit.com/index.php?tle=iSmartenit
Basics
1. Install iSmartenit app - available on iTunes, Google Play, or open web app at hp://app.smartenit.com
2. Create a user account to register your gateway for easy access from any iSmartenit applicaon (oponal)
3. Discover the Harmony P2 Gateway on your local network
4. Discover your smart devices
5. Directly control and monitor your smart devices
6. Set up Wizards to automate smart device control and monitoring
For our growing list of compable devices, visit - hp://wiki.smartenit.com/index.php?tle=Supported_Devices
The Harmony SE must be installed indoors
1. Register
Register the device with your electric utility using the included
installation code and the instructions provided by the utility.
Each code is unique to a particular device, so please ensure the
provided numbers are entered correctly.
2. Connect network cable to Ethernet port and Internet router
3. Connect power supply
4. Point antenna upwards

2014 Compacta International, Ltd. - Rev. 9/14
Harmony P2, iSmartenit, and Smartenit are trademarks of Compacta Intl. Ltd.
INSTEON is a registered trademark of SmartLabs, Inc. X10 is a registered trademark of X10.
iSmartenit Application Interface Basics
Adding devices
Step 1 Step 2 Step 3 Step 4
Adding a Wizard
Step 1 Step 2 Step 3
Wizards are macros that can
be set to automacally control
devices on your network based
on me or the state of other
devices.
Click on the Wizards buon to
get to the Wizards menu.
Once in the Wizards menu, click
the “+” icon to add a new Wizard.
The next screen will allow you
give the Wizard a name and add
condions and eects.
Click on the “+” icon under the “When”
secon to add a condion for when the
Wizard will trigger a desired acon.
The “When” can be set up to trigger
based on me of day, day of week, status
of another device, or all of the above.
Click the disk icon to save when nished.
Step 4
Click on the “+” icon under the “Do
this” secon to add an eect that
will be triggered when the “When”
condion is met.
Select a device and the acon to
take place when the condion is
met.
Click the disk icon to save when
nished.
[phone]
Technical Support
Smartenit.com
NOTE: Visit hp://wiki.smartenit.com/index.php?tle=ISmartenit for more info.
Click on the Default Area icon to
open devices menu for this area.
Other Areas can be added here by
clicking the “+” icon. Areas can
be used to organize devices into
sub-categories.
To discover devices (ZigBee and
INSTEON*), click on the “+” icon
and select “Discover devices”.
You’ll be noed that you have
250 seconds to add your devices
and be prompted to conrm.
*INSTEON and X10 devices
require connecon to an
INSTEON/X10 interface, such as
our ZBPLM.
As your devices add to the
gateway, they will populate in
the area device list and have the
most commonly used funconality
available for each device. (Ex.
On/O toggle buon for load
controllers)
Alternavely, you may add devices
manually. This is required for X10 and
WiFi devices, but INSTEON devices can
be added manually as well.
Give your device a name and pick an
icon by clicking on the pencil icon.
Then choose the device you want to
add from the wheel selector and enter
the appropriate informaon for device
enrollment.
Click the save icon when nished.