Smartgen CMM365-2G User manual

CMM365-2G
CLOUD MONITORING COMMUNICATION MODULE
USER MANUAL
SMARTGEN (ZHENGZHOU) TECHNOLOGY CO., LTD.

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2017-07-31 Version 1.1 Page 2 of 19
CONTENT
1 OVERVIEW......................................................................................................................................... 4
2 PERFORMANCE AND CHARACTERISTICS.................................................................................... 4
3 SPECIFICATION................................................................................................................................. 5
4 PANEL AND TERMINAL DESCRIPTION........................................................................................... 6
4.1 PANELINDICATORANDBUTTONS........................................................................................... 6
4.2 GPRS........................................................................................................................................... 7
4.3 MASTER RS485.......................................................................................................................... 7
4.4 SLAVE RS485.............................................................................................................................. 7
4.5 LINK............................................................................................................................................. 8
4.6 USB DEVICE ............................................................................................................................... 8
4.7 TERMINAL................................................................................................................................... 9
5 PROGRAMMABLE PARAMETERS................................................................................................. 10
5.1 CONTENTSAND SCOPES OF PARAMETERS....................................................................... 10
5.2 PCCONFIGURATION INTERFACE.......................................................................................... 14
6 SMS FUNCTION AND REMOTE CONTROL................................................................................... 15
6.1 SMSSHORTMESSAGEALARM.............................................................................................. 15
6.2 GSM SHORTMESSAGE REMOTE CONTROL........................................................................ 15
7 SYSTEM DIAGRAM.......................................................................................................................... 16
8 CASE DIMENSION AND INSTALLATION ....................................................................................... 17
9 FAULT FINDING............................................................................................................................... 18
10 ENCLOSE: PACKING LIST .......................................................................................................... 19

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2017-07-31 Version 1.1 Page 3 of 19
Chinese trademark
English trademark
SmartGen —make your generator smart
SmartGen Technology Co., Ltd.
No.28 Jinsuo Road
Zhengzhou
Henan Province
P. R. China
Tel: [phone]
0086-371-67991553/67992951
0086-371-67981000(overseas)
Fax: [phone]
Web: http://www.smartgen.com.cn
http://www.smartgen.cn
Email: [e-mail]
All rights reserved. No part of this publication may be reproduced in any material form (including
photocopying or storing in any medium by electronic means or other) without the written permission of
the copyright holder.
Applications for the copyright holder’s written permission to reproduce any part of this publication should
be addressed to Smartgen Technology at the address above.
Any reference to trademarked product names used within this publication is owned by their respective
companies.
SmartGen Technology reserves the right to change the contents of this document without prior notice.
Software Version
Date
Version
Note
2016-11-14
1.0
Original release.
2017-07-31
1.1
Modified the wire connection on the mask, and changed rated pictures.

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 4 of 19
1 OVERVIEW
CMM366-2G Cloud Monitoring Communication Module is GPRS wireless network communication
protocol switch module which can achieve genset (with SCI) connect to Internet. The module gains
genset data via RS485 port, USB port, or LINK port of genset controller modules of international
first-class brands including SmartGen, DeepSea, ComAp, etc. Then the module transmits the data to
corresponding cloud server via GPRS wireless network for achieving user’s real-time monitoring to
running status and searching of running records via APP (IOS or Android) and PC terminal devices.
CMM366-2G module has already integrated protocols of mainstream genset control module. It not only
can achieve genset monitoring but also can insert some digital alarm input/output signal to achieve
monitoring of generator room entrance guard, guard against theft and fire facilities.
This module has master and slave RS485 ports, in which master RS485 port connects with genset
controllers and slave RS485 port connects with dynamic environment monitoring system.
2 PERFORMANCE AND CHARACTERISTICS
1) Connect to cloud server via GPRS wireless network , one to one monitoring;
2) With two kinds of ports for communication with genset control module: RS485 and LINK; can
monitor great majority genset control modules of international first-class brands;
3) Widely power supply: DC (8~35)V, can direct use genset build-in battery;
4) With ARM-based 32-bit SCM, high integration of hardware and strong programming ability;
5) Include with GPS locate function to achieve gain location information and locate genset;
6) Take JSON network data communication protocol, upload real-time data variation and take
compression algorithm to vastly reduce network flow at the same time;
7) Users can set up history data upload rest to upload monitoring data to server (history data can be
analyzed);
8) When alarm occurs it can upload data to server immediately;
9) 2 auxiliary digital input ports which can receive external alarm signal;
10) 1 auxiliary relay output ports which can output various of alarm signal;
11) Master and slave RS485 ports; master RS485 port connects with genset controllers and slave
RS485 port connects with dynamic environment monitoring system.
12) With SMS functions to control genset. All the alarm signals of genset can be sent to 5 preset
telephone numbers as short massages, and users also can check genset status via SMS
function.(only suit for HGM7000 series and HGM9000series controllers of SartGen)
13) Power and multiple communication status indicators on front panel that working status is clear at a
glance;
14) Lamp test function;
15) Parameter adjust function: users can adjust parameters via USB port;
16) Take standard π-type 35mm guide-rail installation or screw-fixed installation that the module can
be installed in the genset control box;
17) Modular design, self extinguishing ABS plastic shell, light weight, compact structure with easy
installation.

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 5 of 19
3 SPECIFICATION
Items
Contents
Operating Voltage
DC 8.0V~35.0V, continuous power supply.
Power Consumption
Standby: ≤2W
Working: ≤5W
Auxiliary Input
Volt Free Digital Input
Auxiliary Output
1A DC30V Volt free output
Master RS485
Non seclusion type
Slave RS485
Seclusion type
LINK
SmartGen exclusive port
USB Device
B-type USB mother port
GPRS Port
Standard SMB port (female), SMB port (male) for antenna.
Case Dimensions
73mmx105mmx35mm
Working Conditions
Temperature: (-25～+70)°C Humidity: (20～93)%RH
Storage Condition
Temperature: (-25～+70)°C
Weight
0.15kg

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 6 of 19
4 PANEL AND TERMINAL DESCRIPTION
4.1 PANEL INDICATOR AND BUTTONS
Icon
Note
POWER
GreenLED Light: Power supply and cloud server connection normal indicator;
RedLED Light: Common alarm indicator;
RedLED Blink when without inserting SIM card.
ALARM(Red)
Normally Light: Common alarm indicator
RS485
MASTER(Red)
Normally Extinguish:RS485 disabled
Normally Light: Communication fail
Blink: Communication normal
RS485 SLAVE(Red)
Normally Extinguish: Not communication
Blink: Communication normal
GPRS(Red)
Extinguish: CMM365-2G login with server unsuccessfully
Light: Login with server successfully
Blink: Real-time communication normal
LINK(Red)
Normally Extinguish: Disabled
Normally Light: Communication fail
Blink: Communication normal
Lamp test/Rest:
Press this button for 1s, all the LEDs are illuminated; press for 10s, reset the module to default and all
the LEDs blink for 3 times.
Note: After reset the module, set up the parameters via PC software is recommended. Please
operate cautiously.

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 7 of 19
4.2 GPRS
Connect GPRS antenna to cloud monitoring module port.
4.3 MASTER RS485
Achieving genset data information via RS485 port connects to Genset control module’s RS485 port.
Add 120Ω terminal resistance is recommended if fail to communicate. Shielding wire one end connects
to SCR and the other one hang in the air.
RS485 Connection Diagram is as follows,
4.4 SLAVE RS485
Connect to RS485 port of dynamic environment monitoring system via slave RS485 port, then dynamic
environment system will achieve genset data monitoring function.

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 8 of 19
4.5 LINK
Achieving genset data information via LINK port connects to Genset control module’s LINK port.
RS485 Connection Diagram is as follows,
4.6 USB DEVICE
Set up all the parameters and view CMM365-2G ID&Login password by CMM365 USB port connecting
with PC USB port.
USB and PC connection diagram is follows,

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 9 of 19
4.7 TERMINAL
No.
Function
Cable Size
Note
1
B-
1.0mm2
Connected with negative of starter battery.
2
B+
1.0mm2
Connected with positive of starter battery. 3Afuse
is recommended.
3
Aux. Input 1
1.0mm2
Active when connect to B-.
4
Aux. Input 2
1.0mm2
Active when connect to B-.
5
Aux. Output
Normally
Open
1.0mm2
Normally open outputs, rated 1A DC30V
6
Common
1.0mm2
7
Normally
Close
1.0mm2
8
RS485 B(-)
MASTER
0.5mm2
Impedance-120Ω shielding wire is
recommended, its single-end earthed.
9
RS485A(+)
0.5mm2
10
SCR
0.5mm2
11
RS485 B(-)
SLAVE
0.5mm2
Impedance-120Ω shielding wire is
recommended, its single-end earthed.
12
RS485A(+)
0.5mm2
13
SCR
0.5mm2

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 10 of 19
5 PROGRAMMABLE PARAMETERS
5.1 CONTENTS AND SCOPES OF PARAMETERS
Form1
No.
Items
Parameters
Defaults
Description
Gateway
1
Website
(0-65535)
20 Chinese characters, letters or
numbers
2
URL
(0-65535)
cm.smartgen.com.cn
40 characters
3
Server Port
(0-65535)
81
4
Password
(0-65535)
123456
16 characters
GSM
1
GSM Enabled
(0-1)
1
0:Disabled; 1:Enabled
2
GPRS Password
Reserved
3
Message Center
Reserved
4
PIN Enabled
(0-1)
0
0:Disabled; 1:Enabled
5
APN
(0-65535)
40characters
6
SMS Enabled
(0-1)
0
7
SMS Warning
(0-1)
0
8
Phone Number Set
Max. 20 bits
Area code needed to be added
before the phone number.
E.g. China 8613666666666
Cloud Server
1
Auto Gain Comm.
Port
(0-1)
1
0:Disabled; 1:Enabled
2
ID
(1-254)
1
Module ID
3
Communication Port
(0-4)
2
0:Disabled;
1:LINK;
2:RS485;
3:RS232;
4:USB
4
Baud Rate
(0-2)
0
0:9600bit/s;
1:19200bit/s
2: 115200bit/s
5
Location Info
(0-1)
0
0: Disabled
1: Manual input location info
6
Longitude
(-180-180)°
0.000000
Location and elevation of genset
control module.
7
Latitude
(-90-90)°
0.000000
8
Altitude
(-9999.9-9999.9)
100.0
9
Type
HGM6110 Detailed to See: Form4
10
Name
(0-65535)
Module Names(20 Chinese characters, letters or
numbers)
11
Debug Staff Name
20 Chinese characters, letters or numbers
12
Telephone
20 Chinese characters, letters or numbers
13
Installation Time
20 Chinese characters, letters or numbers

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 11 of 19
14
History Data Rest
(0-3600)s
0
History data upload rest.
Note: No upload when it is 0s
15
Time Zone
(-12-12)
8
Time Zone
16
Live Data Upload
Interval
(1-20)s
5
Interval time of uploading real time
data.
Module Configuration Info
1
Type
(0-5)
0
0:AMF module
1:Single-unit self-starting module
2: Single-single parallel module
3:Mains-genset parallel module
4:Mains-bus parallel module
5:Bus-bus parallel module
Note: The parameter will auto change
according to genset type.
2
Rated Speed
(0-6000)r/min
1500
Rated Speed
3
AC Supply
(0-3)
0
0:3P4W;1:3P3W;2:2P3W;3:1P2W。
4
Rated Volt
(30-30000)V
230
Rated Volt
5
Rated Freq
(10-600)Hz
50
Rated Freq
6
Rated Current
(5-6000)A
500
Rated Current
7
Rated Power
(0-6000)kW
276
Rated Power
8
Custom Description 1
(0-65535)
Custom Description (20 Chinese characters,
letters or numbers)
9
Custom Description 2
(0-65535)
Custom Description (20 Chinese characters,
letters or numbers)
10
Custom Description 3
(0-65535)
Custom Description (20 Chinese characters,
letters or numbers)
11
Custom Description 4
(0-65535)
Custom Description (20 Chinese characters,
letters or numbers)
12
Custom Description 5
(0-65535)
Custom Description (20 Chinese characters,
letters or numbers)
Digital Input
Digital Input 1
1
Setting
(0-9)
0
Default: Not used
2
Type
(0-1)
0
0:Active when close
1:Active when open
See: Form2
3
Delay
(0-20.0)
0.0
Action delay
Digital Input 2
3
Setting
(0-9)
1
Default: Lamp test
4
Type
(0-1)
0
0:Active when close
1:Active when open
See: Form2
5
Delay
(0-20.0)
0.0
Action delay
Digital Output
1
Setting
(0-14)
0
Default: Not used
See: Form3

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 12 of 19
Form2
No.
Item
Description
0
Not Used
Not used.
1
Lamp Test
All the indicators are illuminated when input is active.
2
Remote Control Inhibited
Cloud start/stop control is prohibited when input is active.
3
Access Alarm Input
Access alarm is uploaded to server when input is active.
4
Fire Alarm Input
Fire alarm is uploaded to server when input is active.
5
Alarm Input
External alarm is uploaded to server when input is active.
6
Reserved
7
Reserved
8
Reserved
9
Factory Test Mode
It is only used for factory hardware port test when active.
Form3
No.
Item
Description
0
Not used
Output port won’t output when this item is selected.
1
Digital Input 1 Active
Output when auxiliary input 1 is active.
2
Digital Input 2 Active
Output when auxiliary input 2 is active.
3
RS485 Comm. Fail
RS485 communication fails.
4
Network Comm. Fail
Network communication fails.
5
LINK Comm. Fail
LINK communication fails.
6
RS232 Comm. Fail
RS232 communication fails.
7
Common Alarm
Output when there is an alarm.
8
Remote Control
When remote control command is sent via cloud server, output
delay fixed as 20s.
9
Reserved
10
Reserved
11
Reserved
12
Reserved
13
Reserved
14
Reserved
Form4
Manufacturers
Type
Note
SmartGen
HGM6110
Single-unit self-starting module
HGM6120
AMF module
HGM7x10
Single-unit self-starting module
HGM7x20
AMF module
HGM410
Single-unit self-starting module
HGM420
AMF module
HGM9120
AMF module
HGM9210
Single-unit self-starting module
HGM9220
AMF module
HGM9310
Single-unit self-starting module

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 13 of 19
HGM9320
AMF module
HGM9410
Single-unit self-starting module
HGM9420
AMF module
HGM9510
Single-single parallel module
HGM9520
Mains-genset parallel module
HGM9530
Single-single parallel module
HGM9540
Mains-genset parallel module
HGM9560
Mains-bus parallel module
HGM9580
Bus-bus parallel module
HGM9610
Single-unit self-starting module
HGM9620
AMF module
ZX9320
AMF module
HSC940
Single-unit self-starting module
TC1.0
AMF module
TC2.0
AMF module
TC3.0
Single-unit self-starting module
DeepSea
DSE7110MKII
Single-unit self-starting module
DSE7120MKII
AMF module
DSE7210
Single-unit self-starting module
DSE7220
AMF module
DSE7310
Single-unit self-starting module
DSE7320
AMF module
DSE7410
Single-unit self-starting module
DSE7420
AMF module
DSE7450
Single-unit self-starting module
DSE8610
Single-single parallel module
DSE8620
Mains-single parallel module
ComAp
MRS10 Ⅱ
Single-unit self-starting module
MRS16 Ⅱ
Single-unit self-starting module
AMF25 Ⅱ
AMF module
IGNT
Single-single parallel module
Harsen
GU620A
Single-unit self-starting module
GU621A
AMF module
GU630A
Single-unit self-starting module
GU631A
AMF module
GU620A-00
Single-unit self-starting module
GU621A-00
AMF module
GU630A-00
Single-unit self-starting module
GU631A-00
AMF module
GU320A
Single-unit self-starting module
GU320B
Single-unit self-starting module

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 14 of 19
5.2 PC CONFIGURATION INTERFACE
The USB port of CMM366-3G communication module connects PC port to configure the parameters.
Gateway Configuration
Cloud Server Configuration
Module Monitoring Interface

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 15 of 19
6 SMS FUNCTION AND REMOTE CONTROL
6.1 SMS SHORT MESSAGE ALARM
When controller detects alarm, it will send short message to phone automatically.
NOTE: SMS short message alarm function only suit for SmartGen HGM7000 series and HGM9000 series
controllers.
NOTE: All alarms about shutdown, trip and stop and trip will be sent to the pre-set phone. Warnings are sent to
the phone according to the pre-set.
6.2 GSM SHORT MESSAGE REMOTE CONTROL
Users send order message to the module, then controller will make actions according to this SMS order and
pass back corresponding operations information. Controllers only execute the orders by pre-set.
SMS Orders List：
No.
SMS Orders
Pass Back Information
Description
1
SMS
GENSET
GENSET ALARM
When genset is
stopping alarm
status of genset
SYSTEM IN STOP MODE
GENSET AT REST
At rest status in stop
mode
SYSTEM IN MANUAL MODE
GENSETAT REST
At rest status in
manual mode
SYSTEM IN TEST MODE
GENSETAT REST
At rest status in test
mode
SYSTEM IN AUTO MODE
GENSET AT REST
At rest status in auto
mode
SYSTEM IN STOP MODE
GENSET IS RUNNING
Running status in
stop mode
SYSTEM IN MANUAL MODE
GENSET IS RUNNING
Running status in
manual mode
SYSTEM IN TEST MODE
GENSET IS RUNNING
Running status in test
mode
SYSTEM IN AUTO MODE
GENSET IS RUNNING
Running status in
auto mode
2
SMS START
GENSETALARM
Generator is shutdown
alarm or trip alarm
Start genset
STOP MODE NOT START
Cannot start in stop
mode
SMS START OK
Start in manual/test
mode
AUTO MODE NOT START
Cannot start in auto
mode
3
SMS STOP
MODE
SMS STOP OK
Set as stop mode
4
SMS MANUAL
MODE
SMS MANUAL MODE OK
Set as manual mode
5
SMS TEST
MODE
SMS TEST MODE OK
Set as test mode

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 16 of 19
6
SMS AUTO
MODE
SMS AUTO MODE OK
Set as auto mode
7
SMS DETAIL
Pass back information can be
set via controller software.
Gets details information of genset.
NOTE: When sending orders, users need to follow SMS orders in above form and all the letters must be capital.
NOTE: Pass back information from SMS DETAIL including: working mode, mains voltage, generator voltage, load
current, mains frequency, generator frequency, active power, apparent power, power factor, battery voltage, D+
voltage, water temperature, oil pressure, oil level, engine speed, total running time, genset status, and alarm status.
7 SYSTEM DIAGRAM
One set CMM366-3G module connects with one genset monitor module. It can be connected via RS485
port, LINK port.
MM365-2G System Diagram

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 17 of 19
8 CASE DIMENSION AND INSTALLATION
2 ways for installation: 35mm guide rail in box or screw (M4) installation as below:
CMM365-2G Case Dimension
CMM365-2G Guide Rail Installation
CMM365-2G Screw Installation

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 18 of 19
9 FAULT FINDING
Symptoms
Possible Solutions
Controller no response with
power.
Check power voltage;
Check controller connection wirings.
GPRS Indicator Not Light
Check SIM card is inserted or not;
Check GPRS antenna is connected or not.
RS485 Communication
Abnormal
Check connections;
Check RS485 port is enabled or not;
Check settings of genset ID and baud rate are correct or not.
Check RS485’s connections of A and B is reverse connect or not.
LINK Communication
Abnormal
Check connections;
Check LINK port is enabled or not;
Check settings of genset ID and baud rate are correct or not.

CMM365-2G Cloud Monitoring Communication Module User Manual
CMM365-2G Cloud Monitoring Communication Module 2016-11-14 Version 1.0 Page 19 of 19
10 ENCLOSE: PACKING LIST
No.
Name
Number
Remark
1
CMM365-2G
1
2
Osculum Type GSM
Antenna
1
3
120Ω Matched
Resistance
4
4
Certification
1
5
User Manual
1
_________________________________