Smartgen SGB100 User manual

SGB100
BLUETOOTH COMMUNICATION MODULE
USER MANUAL
SMARTGEN (ZHENGZHOU) TECHNOLOGY CO.,LTD.

Chinese trademark
English trademark
SmartGen ―make your generator smart
SmartGen Technology Co., Ltd
No. 28 Jinsuo Road
Zhengzhou City
P. R. China
Tel: [phone]
0086-371-67981888
0086-371-67991553
0086-371-67992951
0086-371-67981000 (overseas)
Fax: [phone]
Web: http://www.smartgen.com.cn
http://www.smartgen.cn
Email: [e-mail]
All rights reserved. No part of this publication may be reproduced in any material form
(including photocopying or storing in any medium by electronic means or other) without the
written permission of the copyright holder.
SmartGen Technology reserves the right to change the contents of this document without prior
notice.
Software Version
Date
Version
Content
2017-01-06
1.0
Original release.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 3 of 16
CONTENTS
1 OVERVIEW.....................................................................................................................4
2 PERFORMANCE AND CHARACTERISTICS................................................................4
3 TECHNICAL PARAMETERS..........................................................................................4
4 SOFTWARE....................................................................................................................4
4.1 SOFTWARE DOWNLOAD....................................................................................... 4
4.2 SOFTWARE INSTALLATION REQUIREMENTS .................................................... 4
4.3 SOFTWARE FUNCTION DESCRIPTION ............................................................... 4
5 OPERATION...................................................................................................................6
5.1 BLUETOOTH CONNECT WITH CONTROLLER.................................................... 6
5.2 OPEN BLUETOOTH FUNCTION ON YOUR PHONE ............................................ 6
5.3 iGMPA6 CONNECT TO BLUTOOTH COMMUNICATION MODULE...................... 7
5.4 CHECKALARMING & WARNING INFORMATION................................................. 8
5.5 MODIFY MODULE CONFIGURATION................................................................... 9
5.6 MODULE MONITORING ........................................................................................11
5.7 DATACALIBRATION.............................................................................................. 12
5.8 HISTORICAL DATA................................................................................................ 13
5.9 MANAGE CONFIGURATION FILES ..................................................................... 14
5.10 MANAGE HISTORIC RECORD............................................................................. 15
6 ATTENTION..................................................................................................................16
6.1 CONNECTION DELAY .......................................................................................... 16
6.2 PASSWORD........................................................................................................... 16

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 4 of 16
1 OVERVIEW
SGB100 Bluetooth Communication Module is wireless communication module designed for
SmartGen genset controllers, which can monitor and adjust configuration parameters of
controllers via iGMPA6 mobile phone software.
2 PERFORMANCE AND CHARACTERISTICS
1) It is reliable with Bluetooth 4.1 and BLE low power consumption communication mode.
2) Small and light, easy to take.
3) Configuration work is finished on the mobile client instead of computer used before. More
convenient and reduced requirement for the working platform.
3 TECHNICAL PARAMETERS
Item
Content
Power Supply Mode
USB（<50mA）
Port Type
B-type USB port（male port）
Bluetooth Module
Bluetooth 4.1
Bluetooth Comm. Mode
BLE low power consumption communication mode.
Communication Distance
10m （barrier free）
Overall Dimensions
51.3mm x 36.1mm x 17.6mm （wire length 30cm）
Weight
40g
Working Condition
Temperature：(-25~+70)℃Relative Humidity：(20~93)%
Storage Condition
Temperature：(-25~+70)℃
4 SOFTWARE
4.1 SOFTWARE DOWNLOAD
Please download iGMPA6 mobile phone client-side from SmartGen official websites as below,
http://www.smartgen.com.cn/datadownload.php
http://www.smartgen.cn/datadownload.php
4.2 SOFTWARE INSTALLATION REQUIREMENTS
Mobile phone and mobile device need to support Bluetooth 4.0 function and above android 4.3
version (4.7 inch or larger screen of mobile phone is recommended)
4.3 SOFTWARE FUNCTION DESCRIPTION
Software Name: iGMPA6
Software Icon:
Software Interface:

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 5 of 16
Software Function Module:
A. Module Config: Configure module’s parameters;
B. Module Monitoring: Check engine information, input/output ports status, maintenance and
electric quantity information.
C. Data Calibration: Calibrate controller’s data and time, total run time, total start times and
active electric energy.
D. Historical Data: Read and clear controller’s event log information.
E. Software Settings: Check and management controller’s saved configuration files, event
log files and software version information.
Menu:
A. “Device Connection” : It is shown on each page of software, which is used for
searching, connecting or breaking Bluetooth device; when connected successfully, the
icon turns to .
B. “Scan”: It is shown on the page of Bluetooth device connection, which is used for canning
surrounding Bluetooth device.
C. “Alarming Status”:For each page of software, it can be functional. When alarms or
warnings occurred, it is appeared on the page, and users can check detail alarm
information in this menu, otherwise, it is not displayed.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 6 of 16
5 OPERATION
5.1 BLUETOOTH CONNECT WITH CONTROLLER
SGB100 Bluetooth communication module connects with controllers via USB port.
5.2 OPEN BLUETOOTH FUNCTION ON YOUR PHONE
Open Bluetooth function on your phone: “Settings” -->”Bluetooth”

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 7 of 16
5.3 iGMPA6 CONNECT TO BLUTOOTH COMMUNICATION MODULE
Click “Connection” in any page of iGMPA6 software to enter into “Connecting Bluetooth”
interface, and then scan the surrounding Bluetooth. Click the name of device to connect and
re-click to release connection.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 8 of 16
5.4 CHECK ALARMING & WARNING INFORMATION
Click in any page of iGMPA6 software to check the detail alarm and warning information.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 9 of 16
5.5 MODIFY MODULE CONFIGURATION
Configuration parameters of controller can be read into iGMP6 software through “Read Config”
in menu page, and the modified parameters can be written into controller through “Write in
Config”.
“New Config” will initiate program parameters to the default value.
“Open Config Fail” will load the configuration files in the phone’s catalog of “My
Device/SmartGen/iGMPA6/cfg” to the program.
“Save Config Fail” and “Config File Save as” can save the final configuration of the software to
the file.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 10 of 16
Module configuration parameters can be modified through “Module Config”. (“Read Config”
before modify parameters is recommended.)

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 11 of 16
5.6 MODULE MONITORING
Through module monitoring function, users can check electric quantity information, genset
working status (including genset information, input/output port information and maintenance
status), and also can control genset and transfer switch.
Genset Status(include control operation) is as bellow,
Electric Quantity Information

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 12 of 16
5.7 DATA CALIBRATION
This function can calibrate controller’s data and time, total run time, total start times and active
electric energy.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 13 of 16
5.8 HISTORICAL DATA
This function can read and clear controller’s historical data, and save the historical data to
catalog of the phone my device/SmartGen/iGMPA6/history as the text file.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 14 of 16
5.9 MANAGE CONFIGURATION FILES
Configuration files in the phone’s catalog of my device/SmartGen/iGMPA6/history can be
managed through “Software Set” ->”Configuration Files” function.
Click each configuration file, and then it can “open in text file form” and “share the file”.
“ ”menu key in the top right corner can batch delete configuration files.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 15 of 16
5.10 MANAGE HISTORIC RECORD
Historic record files in the phone’s catalog of my device/SmartGen/iGMPA6/history can be
managed through “Software Set” ->”Historic Record” function.
Click each historic record file, and then it can “open in text file form” and “share the file”.
“ ”menu key in the top right corner can batch delete historic record files.

SGB100 Bluetooth Communication Module User Manual
SGB100 Bluetooth Communication Module Version 1.02017-01-06 Page 16 of 16
6 ATTENTION
6.1 CONNECTION DELAY
After iGMP6 connecting with Bluetooth device, it will establish a normal communication
connection with the controller after 5s-7s. Otherwise, mobile phone can’t communicate with
the controller.
6.2 PASSWORD
If users want to change controller’s password, please select password option and enter the
new password (default password appeared in the input box is not the real password of the
controller).
When write in the configuration, if there is a request to enter password, please enter the
controller’s password.
_________________________________