Smartgen CMM366A-WIFI User manual

CMM366A-WIFI
CLOUD MONITORING COMMUNICATION MODULE
USER MANUAL
SMARTGEN (ZHENGZHOU) TECHNOLOGY CO., LTD.

Chinese trademark
English trademark
SmartGen —make your generator smart
SmartGen Technology Co., Ltd.
No.28 Jinsuo Road
Zhengzhou
Henan Province
P. R. China
Tel: [phone]
0086-371-67991553/67992951
0086-371-67981000(overseas)
Fax: [phone]
Web: www.smartgen.com.cn
www.smartgen.cn
Email: [e-mail]
All rights reserved. No part of this publication may be reproduced in any material form (including
photocopying or storing in any medium by electronic means or other) without the written permission of
the copyright holder.
Applications for the copyright holder’s written permission to reproduce any part of this publication should
be addressed to SmartGen Technology at the address above.
Any reference to trademarked product names used within this publication is owned by their respective
companies.
SmartGen Technology reserves the right to change the contents of this document without prior notice.
Table 1 - Software Version
Date
Version
Note
2017-12-20
1.0
Original release.

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 3 of 17
CONTENT
1 OVERVIEW......................................................................................................................................... 4
2 PERFORMANCE AND CHARACTERISTICS.................................................................................... 4
3 SPECIFICATION................................................................................................................................. 5
4 PANEL AND TERMINAL DESCRIPTION........................................................................................... 6
4.1 PANELINDICATORANDBUTTONS........................................................................................... 6
4.2 WIFIANTENNAINTERFACE ...................................................................................................... 7
4.3 RS485.......................................................................................................................................... 7
4.4 RS232.......................................................................................................................................... 7
4.5 LINK............................................................................................................................................. 8
4.6 USB HOST .................................................................................................................................... 8
4.7 USB DEVICE ............................................................................................................................... 8
4.8 TERMINAL................................................................................................................................... 9
5 PROGRAMMABLE PARAMETERS................................................................................................. 10
5.1 CONTENTSAND SCOPES OF PARAMETERS....................................................................... 10
5.2 PCCONFIGURATION INTERFACE.......................................................................................... 12
6 SYSTEM DIAGRAM.......................................................................................................................... 14
7 CASE DIMENSION AND INSTALLATION ....................................................................................... 15
8 TROUBLESHOOTING...................................................................................................................... 16
9 PACKING LIST ................................................................................................................................. 17

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 4 of 17
1 OVERVIEW
CMM366A-WIFI Cloud Monitoring Communication Module is WIFI wireless network communication
protocol switch module which can achieve genset (with SCI) connect to Internet. After logging into cloud
server, module will receive corresponding genset controller communication protocol from cloud server.
And module gains genset data via RS485 port, USB port, LINK port or RS232 port then send the data to
corresponding cloud server through WIFI wireless network for achieving user’s real-time monitoring to
running status and searching of running records via APP (IOS or Android) and PC terminal devices.
CMM366A-WIFI module not only can achieve genset monitoring but also can insert some digital
alarm input/output signal to achieve monitoring of generator room entrance guard, guard against theft
and fire facilities.
2 PERFORMANCE AND CHARACTERISTICS
Connect to cloud server via WIFI wireless network, one to one monitoring;
Multiple ports for communication with genset control module: RS485, RS232, LINK and USB
(Host); can monitor great majority genset control modules of international first-class brands;
Widely power supply: DC (8~35)V, can direct use genset build-in battery;
With ARM-based 32-bit SCM, high integration of hardware and strong programming ability;
Include with GPS locate function to achieve location information and locate genset;
Take JSON network data communication protocol, upload real-time data variation and take
compression algorithm to vastly reduce network flow at the same time;
Users can upload monitoring data to the server for analyzing based on the user-defined “history
data upload interval”;
When alarm occurs it can upload data to server immediately;
2 auxiliary digital input ports which can receive external alarm signal;
1 auxiliary relay output ports which can output various of alarm signal;
Perpetual calendar and clock functions;
Power and multiple communication status indicators on front panel that working status is clear at a
glance;
Lamp test function;
Parameter adjust function: users can adjust parameters via USB port;
Take standard π-type 35mm guide-rail installation or screw-fixed installation that the module can
be installed in the genset control box;
Modular design, self extinguishing ABS plastic shell, light weight, compact structure with easy
installation.

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 5 of 17
3 SPECIFICATION
Table 2 –Technical Data
Items
Contents
Operating Voltage
DC 8.0V~35.0V, continuous power supply
Overall Power
Consumption
Standby: ≤2W
Working: ≤5W
Auxiliary Input
Volts free digital Input
Auxiliary Output
1A DC30V Volts free output
USB Host
A-type USB female port
RS485
Isolated type
RS232
General type
LINK
SmartGen exclusive port
USB Device
B-type USB female port
WIFI
IPX Antenna
Support 802.11b/g/n standard
Case Dimensions
72.5mmx105mmx34mm
Working Conditions
Temperature: (-25～+70)°C Humidity: (20～93)%RH
Storage Condition
Temperature: (-25～+70)°C
Weight
0.15kg

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 6 of 17
4 PANEL AND TERMINAL DESCRIPTION
4.1 PANEL INDICATOR AND BUTTONS
Fig.1 - Panel Indicators
Table 3 –Indicators Description
Icon
Note
POWER/ALARM
GreenLED Light: Power supply normal; connect with cloud server success;
RedLED Light: Common alarm indicator.
RS485(Red)
Normally Extinguish: RS485 disabled;
Normally Light: Communication fail;
Blink: Communication normal.
USB(Red)
Normally Extinguish: USB(Host) disabled;
Normally Light: Communication fail;
Blink: Communication normal.
WIFI(Red)
Extinguish: CMM366A-WIFI login with server unsuccessfully;
Normally Light: Communication fail;
Blink: Communication normal.
LINK(Red)
Normally Extinguish: Disabled;
Normally Light: Communication fail;
Blink: Communication normal.
RS232(Red)
Normally Extinguish: RS232 disabled;
Normally Light: Communication fail;
Blink: Communication normal.
Lamp test/Reset:
Press this button for 1s, all the LEDs are illuminated; press for 10s, reset the module to default and all
the LEDs blink for 3 times.
NOTE: After reset the module, parameters need to re-configured via PC software . Please operate
cautiously.

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 7 of 17
4.2 WIFI ANTENNA INTERFACE
Connect WIFI antenna with module antenna, which is showing as below,
Fig.2 –WIFIAntenna Connection Diagram
4.3 RS485
Connect RS485 port with genset control module RS485 port to achieve genset data information.
If communication fails, recommend adding a 120 Ωterminal resistor. One end of shielding wire
connects with SCR, the other end hangs in the air.
Fig.3 –RS485 Connection Diagram
4.4 RS232
Connect RS232 port with genset control module RS232 port to achieve genset data information.
Fig.4 –RS232 Connection Diagram

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 8 of 17
4.5 LINK
Connect LINK port with genset control module LINK port to achieve genset data information.
Fig.6 –LINK Connection Diagram
4.6 USB HOST
Connect A-type USB port with genset control module USB port to achieve genset data information.
Fig. 6 - USB HOST Connection Diagram
4.7 USB DEVICE
All the parameters can be configured and view CMM366A-WIFI ID&Login password by connecting
USB port with USB disk of PC software.
Fig. 7 –USB Connect PC Device

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 9 of 17
4.8 TERMINAL
Table 4 –Terminals Description
No.
Function
Cable Size
Note
1
B-
1.0mm2
Connected with negative of starter battery.
2
B+
1.0mm2
Connected with positive of starter battery. 3A fuse
is recommended.
3
Aux. Input 1
1.0mm2
Active when connect to B-.
4
Aux. Input 2
1.0mm2
Active when connect to B-.
5
Aux. Output
Normally
Open
1.0mm2
Normally open output 1A DC30V
6
Common
1.0mm2
7
Normally
Close
1.0mm2
8
RS485 B(-)
0.5mm2
Impedance-120Ω shielding wire is recommended,
its single-end earthed.
9
RS485A(+)
0.5mm2
10
SCR
0.5mm2
11
RS232 RX
0.5mm2
RS232
12
RS232 TX
0.5mm2
13
RS232 GND
0.5mm2

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 10 of 17
5 PROGRAMMABLE PARAMETERS
5.1 CONTENTS AND SCOPES OF PARAMETERS
Table 5 –Parameter Content & Scope
No.
Items
Parameters
Defaults
Description
WIFI
1
DHCP Enable
(0-1)
1
0:Disabled; 1:Enabled, auto
obtain IP address.
2
IPAddress
(0-255)
192.168.0.101
All changes of Ethernet (like IP
address, Subnet address) are
active after module rebooting.
3
Subnet Mask
(0-255)
255.255.255.0
4
Default Gateway
(0-255)
192.168.0.2
5
DNS Address
(0-255)
211.138.24.66
6
MAC Address
(0-255)
E.g.
00.08.DC.01.02.03
7
SSID
(0-65535)
32 characters
8
Password
(0-65535)
64 characters
Gateway
1
Site Name
(0-65535)
20 Chinese characters, letters or
numbers
2
Server URL
(0-65535)
www.monitoryun.com
40 characters
3
Server Port
(0-65535)
91
4
Security Code
(0-65535)
123456
16 characters
GPS
1
Location Info
(0-1)
0
0: Disabled 1: Manually Input
2
Longitude
((-180)-180)°
0.000000
GPS location, altitude
information
3
Latitude
((-90)-90)°
0.000000
4
Altitude
((-9999.9)-9999.9)m
100.0
Input Port
Input 1
1
Setting
(0-9)
0
Default: Not used
2
Type
(0-1)
0
0: Close to Activate
1: Open to Activate
See: Table 6 –Digital Input Ports
Content
3
Delay
(0-20.0)
0.0
Action delay
Input 2
1
Setting
(0-9)
1
Default: Lamp test
2
Type
(0-1)
0
0: Close to Activate
1: Open to Activate
See: Table 6 –Digital Input Ports
Content
3
Delay
(0-20.0)
0.0
Action delay
Output
1
Setting
(0-14)
0
Default: Not used
See: Table 7 –Relay Output

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 11 of 17
No.
Items
Parameters
Defaults
Description
Ports Content
NOTE: Configuration of monitoring genset controller model, communication port, communication
baud rate, and communication ID need to be set on the (www.smartgencloud.com) platform, and
monitoring module need to reboot after all parameters been set.
Table 6 –Digital Input Ports Content
No.
Item
Description
0
Not Used
Not used.
1
Lamp Test
All the indicators are illuminated when input is active.
2
Remote Control Inhibited
Cloud start/stop control is prohibited when input is active.
3
Access Alarm Input
Access alarm is uploaded to server when input is active.
4
Fire Alarm Input
Fire alarm is uploaded to server when input is active.
5
Alarm Input
External alarm is uploaded to server when input is active.
6
Reserved
7
Reserved
8
Reserved
9
Factory Test Mode
It is only used for factory hardware port test when active.
Table 7 –Relay Output Ports Content
No.
Item
Description
0
Not used
Output port won’t output when this item is selected.
1
Digital Input 1 Active
Output when auxiliary input 1 is active.
2
Digital Input 2 Active
Output when auxiliary input 2 is active.
3
RS485 Communication
Failure
Output when RS485 communication fails.
4
Network Communication
Failure
Output when Network communication fails.
5
LINK Communication
Failure
Output when LINK communication fails.
6
RS232 Communication
Failure
Output when RS232 communication fails.
7
Common Alarm
Output when there is an alarm.
8
Remote Control Output
Send remote control commands via cloud platform with fixed
output delay 20s.
9
Reserved
10
Reserved
11
Reserved
12
Reserved
13
Reserved
14
Reserved

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 12 of 17
5.2 PC CONFIGURATION INTERFACE
Connecting the USB port of CMM366A-WIFI communication module with PC USB port to configure
the parameters.
Fig. 8 - WIFI Configuration
Fig. 9 –Gateway Configuration

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 13 of 17
Fig.10 Module Monitoring Screen

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 14 of 17
6 SYSTEM DIAGRAM
One CMM366A-WIFI module connects with one genset monitor module. It can be connected via
RS485 port, LINK port, RS232 port or USB port.
Figure 11 - CMM366A-WIFI System Application Diagram

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 15 of 17
7 CASE DIMENSION AND INSTALLATION
2 ways for installation: 35mm guide rail in box or screw (M4) installation as below:
Fig. 12 - CMM366A-WIFI Case Dimension
Fig. 13 - CMM366A-WIFI Guide Rail Installation
Fig. 14 - CMM366A-WIFI Screw Installation

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 16 of 17
8 TROUBLESHOOTING
Table 8 –Fault Finding
Symptoms
Possible Solutions
Controller no response with
power.
Check power voltage;
Check controller connection wirings.
Network Indicator Not Light
Check Ethernet parameters are correct or not;
Check Network socket indicator is light or not;
Check cable is normal or not.
RS485 Communication
Abnormal
Check connections;
Check RS485 port is enabled or not;
Check settings of genset ID and baud rate are correct or not.
Check RS485’s connections of A and B is reverse connect or not.
RS232 Communication
Abnormal
Check connections;
Check RS232 port is enabled or not;
Check settings of genset ID and baud rate are correct or not.
LINK Communication
Abnormal
Check connections;
Check LINK port is enabled or not;
Check settings of genset ID and baud rate are correct or not.

CMM366A-WIFI Cloud Monitoring Communication Module User Manual
CMM366A-WIFI Cloud Monitoring Communication Module 2017-12-20 Version 1.0 Page 17 of 17
9 PACKING LIST
Table 9 - Packing List
No.
Name
Quantity
Remark
1
CMM366A-WIFI
1
2
Osculum type WIFI
antenna
1
3
120Ωmatched resistor
2
4
Certification
1
5
User manual
1
_________________________________