smirthwaite FELIX User manual

06/17
FELIX
INSTRUCTIONS FOR USE
Codes 8101-8105/8161-8165

CONTENTS PAGE
1.0 INTRODUCTION 1
2.0 ILLUSTRATION OF YOUR FELIX CHAIR 1
3.0 FOR YOUR SAFETY 2
4.0 UNPACKING YOUR CHAIR 3
4.1 ASSEMBLY INSTRUCTIONS 3
5.0 CARE & MAINTENANCE 5
6.0 GUARANTEE AND SERVICE 8
7.0 CONTINUOUS IMPROVEMENT 8
8.0 WARRANTY AND AFTER SALE 9

Felix 1
1.0 INTRODUCTION
Thank you for choosing the Smirthwaite Felix Chair.
The Felix is a basic classroom chair for children from the age of 3 years old who
require minimal levels of postural support when seated. The Felix chair has been
purposely created to ensure your child feels more included whilst in their classroom
environment. It is simple to assemble and stackable for easy storage
IMPORTANT!
These instructions should be read by all therapists and carers using
the equipment and should be retained for future reference. The
product should always be used under adult supervision.
Any incorrect use of the product and failure to follow the instructions
may put the user at risk or impede the function. If you have any
queries using this product or wish for further copies, please do not
hesitate to contact Customer Service department
This product has been designed and manufactured specifically and
solely for use by clients with special needs.
2.0 ILLUSTRATION OF YOUR FELIX CHAIR
A. Chair
B. Upholstery
B
A

Felix 2
3.0 FOR YOUR SAFETY
STOP!
Please read these instructions CAREFULLY and THOROUGHLY.
· The user should NOT be left unattended whilst in the chair. Always ensure a
responsible therapist or carer is inattendance.
If you believe the chair or any fitted accessory to be faulty at any time, DO NOT USE
– contact Smirthwaite
•
· The chair is ONLY to be used indoors on a flat levelsurface.
· Stack only chairs of the same size and do NOT exceed more than 5 chairshigh.
· DO NOT EXCEED USER MAXIMUM WEIGHT LIMITS as shown below:
!"#$%&'" (
)*#" (
+,-" (
+"./(0",10/ (
+"./(2,#/0 (
+"./(#"3/0 (
2",10/(&,4,/ (
5&678 (
'9:&.#"9 (
2",10/(5;678 (
<=>=$<=?= (
= (
=>@ (
==AB@ (
<AB@ (
=?B (
< (
<=>C$<=?C (
C (
=C@ (
=D@ (
=>AB@ (
=E? (
=>AB (
<=>D$<=?D (
D (
=F@ (
=FAB@ (
=CAB@ (
=G< (
=F (
<=>F$<=?F (
F (
=?@ (
=?@ (
=FAB@ (
CFC (
=< (
<=>B$<=?B (
B (
=EAB@ (
=?@ (
=FAB@ (
CFC (
CC (
· Regular maintenance checks and cleaning are essential for the safe use ofthis
equipment (see Section 5.0 Care andMaintenance).
· Always keep this product away from naked flames, cigarettes and sources of
heat including open fireplaces, radiators, heaters.
· DO NOT fit parts or accessories of other manufacturers to this product unless
authorised to do so in writing by Smirthwaite USA LLC. Failure to follow these
instructions will not only invalidate the guarantee but could make the seat
dangerous to use.
· Smirthwaite USA LLC will not accept liability for any injury or damage incurred
through such malpractices. Any repairs required must be carried out by
Smirthwaite USA LLC authorized personnel.

Felix 3
4.0 UNPACKING YOUR SEAT
STOP!
If in any doubt, ALWAYS seek ADVICE.
Always turn hand wheels, levers and screws clockwise to tighten or
anti-clockwise to loosen.
· When delivered, the seat will be supplied flat packed
· Please ensure you follow the Felix Assembly Instructions below.
· Please take note of any instructions on the packaging/box whenunpacking.
· Once the seat has been carefully unpacked, please check allparts.
· Ensure small components are not accessible by children to avoidchoking
situations.
4.1 ASSEMBLY INSTRUCTIONS

Felix 4

Felix 5
STOP!
If you believe this product to be faulty – DO NOT USE – Contact
Smirthwaite USA LLC
5.0 CARE AND MAINTENANCE
IMPORTANT!
Cleaning is recommended on a regular basis
· Clean upholstery and wooden parts with a damp cloth and milddetergent
· Stubborn marks on wood work should be cleaned by using a softbrush.
· Do not soak or immerse the chair in water.
· The pelvic strap can be cleaned with a damp cloth. In cases of extreme
soiling it can be machined washed at low temperature with mild detergent but
must be drip dried.
· Store the seat in a cool dry place out of directsunlight.
· DO NOT use bleach, solvents, abrasives, synthetic detergents, wax polishes,
antibacterial sprays or wipes.

Felix 6
5.1 DAILY CHECKS
· Check all parts for signs of wear and tear or damage.
· Check all straps for fraying, and that buckles are notmissing/damaged.
STOP!
The user should not be seated while the checks are carried out.
5.2 SERVICE INTERVAL
The Felix chair should be serviced every 3 years. Servicing must only be
undertaken by a Smirthwaite service engineer, or by a Smirthwaite trained
representative.
5.3 NOMINAL SERVICE LIFE
Your product has a nominal service life of 12 years, during which full post-sales
support will be available with regard to spares and servicing.
Product service life has been determined based upon the design complexity of
product, and the anticipated exposure to normal use.
Good practice dictates all Smirthwaite products have been designed and
manufactured to high levels of safety and quality, and will meet requirements of
normal use when maintained in line with our servicing recommendations.
STOP!
If the product has been out of use for an extended period of time (6
months or more) it should always be serviced prior to being
reissued.
If the product has been subjected to ‘heavy’ or ‘constant’ use, the
service should be reduced to half the recommended period.
Constant and/or heavy use is considered to be:
• Daily use above 7 hours duration
• Weekly use above 5 days duration
• Monthly use above 10 months per year
• Use by a client who is at 90% to 100% of the maximum weight limit of
the product. The maximum weight limit must NEVER beexceeded
• Use by a client who is extremely active, either voluntarily or
involuntarily

Felix 7
5.4 EXTENDING NOMINAL SERVICE LIFE
At Smirthwaite we are proud to produce products that have a reputation for quality
and durability.
We believe our products have the potential to provide benefits to our clients beyond
the nominal service life documented above.
We will continue to provide full support beyond the nominal service life provided the
following conditions are met:
1. A full service schedule has been maintained. (Please refer to Page4)
2. A full service and inspection is undertaken at the end of the nominal service
life period
3. The product is subsequently serviced annually (or biannually if under
‘heavy/constant’ use conditions)
4. Smirthwaite reserve the right to limit support where parts/components are no
longer available
5.5 DOCUMENTATION/RECORDS
• It is the responsibility of the current equipment owner to ensure the ‘Instructions
for Use’ manual and any further manuals for accessories fitted to the equipment
are handed over to the new owner at the time ofexchange/sale
• It is the responsibility of the current equipment owner to ensure the service and
inspection record form is kept up to date
5.6 PRODUCT CONFIGURATION
• Smirthwaite will document and maintain a record of the original product
configuration at the time of first sale
• Smirthwaite will not be held responsible for any subsequent changes to this
configuration unless authorized to do so in writing by Smirthwaite USALLC.
• It is the equipment owner’s responsibility to maintain their own records of
changes to the equipment configuration and to be able to provide such records to
subsequent owners to maintaintraceability
• We recommend an inspection/service by a Smirthwaite Service Engineer (or
Smirthwaite trained engineer) whenever a significant change is made to product
configuration to ensure the product is safe to use. If in any doubt, ALWAYS
seek ADVICE

Felix 8
IMPORTANT REMINDER!
DO NOT fit parts or accessories of other manufacturers to this product
unless authorized to do so in writing by Smirthwaite USA LLC.
Any servicing or repairs required must be carried out by Smirthwaite USA
LLC. (or a Smirthwaite trained engineer).
If you believe this product to be faulty – DO NOT USE – Contact
Smirthwaite USA LLC
If in any doubt, ALWAYS seek ADVICE.
6.0 GUARANTEE & SERVICE
The chair is issued with a full parts and labour guarantee for 2 years from the date of
delivery. This guarantee does not apply to accidental damage caused through
inappropriate use of the chair. This guarantee is issued at the discretion of
Smirthwaite USA LLC on RTB (Return to Base) basis. If you have any questions or
doubts relating to the safety or use of the chair please contact us
7.0 CONTINUOUS IMPROVEMENT
Smirthwaite USA LLC is committed to continuous improvement to their product
range. Should you have any suggestions or comments please send them to our
product design department
Smirthwaite USA LLC reserves the right to change the specification or material
without prior notice.
*Manufactured in the UK by Smirthwaite Ltd for Smirthwaite USA LLC
For catalogues, help and further information on our products please contact us at:
Smirthwaite USA LLC

Felix 9
8.0 WARRANTY & AFTERSALE
10.1 Product Information
Model
Size
Date of Manufacture
Serial Number
Final Inspection
10.2 Service & inspection record form:
Date
Procedure
Service
Personnel

Felix
1
Smirthwaite USA LLC