Snorkel A62JRT User manual

October 2014
Part Number 104897-000
MANUAL
REPAIR PARTS
Serial number 000001 and after
Replaces 104897-000 July 2013

GENERAL INFORMATION
GENERAL INFORMATION 1-1
REPAIR PARTS
CHASSIS ASSEMBLY 2-1
FRONT AXLE ASSY 2-2
REAR AXLE ASSY 2-3
TIRES AND WHEELS 2-4
TURNTABLE ASSY 2-5
RISER ASSEMBLY 2-6
MAIN BOOM ASSY 2-7
JIB BOOM ASSY 2-8
SWING-OUT ENGINE TRAY ASSEMBLY – KUBOTA 2-9
ENGINE ASSY - KUBOTA (TURBO) BEFORE SN01-00050 2-10
ENGINE ASSY - KUBOTA(NON TURBO) AFTER SN01-00051 2-11
KUBOTA ENGINE V2403-M-T-E3B-EU-XB REPLACEMENT PARTS 2-12
FLYWHEEL ASSY 2-13
THROTTLE BRACKET ASSY 2-14
AIR CLEANER ASSY 2-15
BATTERY DISCONNECT PANEL 2-16
CONTROL MODULE TRAY ASSY 2-17
FUEL TANK ASSY 2-18
COWLING ASSY - RIGHT SIDE 2-19
COWLING ASSY - LEFT SIDE 2-20
TURNTABLE AND COUNTERWEIGHT INSTALLATION 2-21
UPPER BOOM/JIB/PLATFORM MOUNTING 2-22
PLATFORM ASSEMBLY 2-23
PLATFORM ASSEMBLY STEEL MARCH 2009 AND AFTER 2-24
SNORKEL GUARD FABRICATIONS - AFTER SN01-000104 2-25
SNORKEL GUARD ASSY SN 01-000104 AND BEFORE 2-26
COWLING INSTALLATION 2-27
TRAY MOUNTING 2-28
FINAL ASSEMBLY 2-29
PLACARDS AND DECALS - ANSI 2-30
PLACARDS AND DECALS - CE 2-31
DECAL KIT SPANISH A62JRT 2-32
HYDRAULICS
HYDRAULIC TANK ASSEMBLY 3-1
OSCILLATING REAR AXLE VALVE ASSEMBLY 3-2
DRIVE WHEEL ASSY 3-3
WHEEL DRIVE MOTOR HYDRAULIC 38CC 3-4
ROTARY MANIFOLD ASSY 3-5
ROTARY MANIFOLD 3-6
ROTATION DRIVE 3-7

HYDROSTATIC PUMP ASSY 3-8
HYDROSTATIC PUMP 3-9
EMERGENCY POWER UNIT 3-10
BOOM FUNCTION CONTROL VALVE ASSEMBLY 3-11
BOOM FUNCTION CONTROL VALVE 3-12
TRACTION MANIFOLD ASSY 3-13
TRACTION MANIFOLD 3-14
AXLE LOCK CYLINDER 3-15
CYLINDER, STEER 3-16
CYLINDER, RISER 3-17
CYLINDER, MAIN BOOM LIFT 3-18
CYLINDER, MAIN BOOM EXTEND 3-19
CYLINDER, JIB 3-20
CYLINDER LEVEL 3-21
ACCUMULATOR ASSY 3-22
PLATFORM ROTATOR ASSY 3-23
CHASSIS/TURNTABLE/CYLINDER HOSE DIAGRAMS AND FUEL LINE INSTALLATION 3-24
ELECTRICAL
LOWER CONTROL PANEL - UNIVERSAL 4-1
LOWER CONTROL PANEL A62JRT DIESEL – ANSI 4-2
LOWER CONTROL PANEL A62JRT DIESEL - CE (TURBO) BEFORE SN01-00050 4-3
LOWER CONTROL PANEL A62JRT DIESEL - CE (NON TURBO) AFTER SN01-00051 4-4
UPPER CONTROL PANEL - UNIVERSAL 4-5
UPPER CONTROL PANEL - ANSI 4-6
UPPER CONTROL PANEL A62JRT DIESEL – ANSI 4-7
UPPER CONTROL PANEL - CE BEFORE SN01-00050 4-8
UPPER CONTROL PANEL A62JRT DIESEL – CE BEFORE SN01-00050 4-9
UPPER CONTROL PANEL - (TURBO) CE AFTER SN01-00051 4-10
UPPER CONTROL PANEL A62JRT – (TURBO) CE AFTER SN01-00051 TO SN01-00065 4-11
UPPER CONTROL PANEL - (TURBO) CE AFTER SN01-00066 4-12
UPPER CONTROL PANEL A62JRT – (TURBO) CE AFTER SN01-00066 4-13
UPPER CONTROL PANEL - (NON TURBO) CE AFTER SN01-00051 TO SN01-00065 4-14
UPPER CONTROL PANEL A62JRT – (NON TURBO) CE AFTER SN01-00051 TO SN01-00065 4-15
UPPER CONTROL PANEL - (NON TURBO) CE AFTER SN01-00066 4-16
UPPER CONTROL PANEL A62JRT – (NON TURBO) CE AFTER SN01-00066 4-17
SINGLE AXIS CONTROLLER WITH TOGGLE SWITCH 4-18
FLASHING LIGHTS/POWER TO PLATFORM INSTALLATION 4-19
PLATFORM FOOT SWITCH 4-20
ELECTRICAL HARNESS LOCATIONS 4-21
ENGINE HARNESS ASSEMBLY - DIESEL 4-22
ENGINE HARNESS - DIESEL 4-23
WIRING HARNESS, VALVE BLOCK 4-24
LOWER CONTROLS TO BOOM FUNCTION VALVE WIRING HARNESS 4-25
BOOM FUNCTION CONTROL VALVE WIRING 4-26

CABLE ASSY 4-27
CABLE ASSY, UPPER CONTROLS 4-28
WIRING HARNESS UPPER CONTROLS 4-29
WIRING HARNESS SP2 BYPASS EVDR 4-30
WIRING HARNESS, EMERGENCY PUMP 4-31
WIRING HARNESS, HORN 4-32
WIRING HARNESS, BOOM ELEVATION LIMIT SWITCH 4-33
BOOM EXTEND LIMIT SWITCH WIRING HARNESS 4-34
WIRING HARNESS, FLASHING LIGHTS 4-35
WIRING HARNESS, 110 VAC POWER LOWER 4-36
WIRING HARNESS, 110 VAC POWER UPPER 4-37
WIRING HARNESS, PLATFORM FOOT SWITCH 4-38
OPTIONS
110 VOLT/2,000 WATT AC GENERATOR 5-1
110 VOLT/2,000 WATT AC GENERATOR – PLUMBING DIAGRAM 5-2
110 VOLT/2,000 WATT AC GENERATOR – GENERATOR ASSEMBLY 5-3
110 VOLT/2,000 WATT AC GENERATOR – VALVE BLOCK ASSEMBLY 5-4
110 VOLT/2,000 WATT AC GENERATOR – HEAT EXCHANGER ASSEMBLY 5-5
110 VOLT/2,000 WATT AC GENERATOR – LOWER CONTROL/GENERATOR HARNESS 5-6
TOW PACKAGE 5-7
TOW PACKAGE 5-8
PLATFORM – 8 FOOT WITH BUMP GUARD 5-9
PLATFORM - 8 FOOT WITH BUMP GUARD UPPER CONTROL WIRING 5-10
EXTREME COLD WEATHER KIT 5-11
EXTREME COLD WEATHER KIT - LOWER CONTROLS 5-12
EXTREME COLD WEATHER KIT - UPPER CONTROLS 5-13
LOWER CONTROLS HYDRAULIC WARM-UP HARNESS 5-14
CSA PACKAGE 5-15
36 X 96 PLATFORM ASSEMBLY WITH BUMP GUARD AND PADDING MARCH 2009 AND AFTER
5-16
36 X 96 PLATFORM ASSEMBLY BUMPGUARD WITH PADDING MARCH 2009 AND AFTER 5-17
MAINTENANCE
MAINTENANCE & SCHEMATICS 6-1
SCHEMATICS
A A
B B

Theaerialplatformis notelectricallyinsulated.Deathorseriousinjurywill result fromcontact
with, or inadequate clearance from, an energized conductor.
Do not go closer than the Minimum Safe Approach Distance as dened by ANSI standards.
Regard all conductors as energized.
Allow for electrical wire sag and aerial platform sway.
If the platform, boom structure, or any part of the aerial platform contacts a high-voltage electrical
conductor, the entire machine can become electrically charged.
If that happens, remain on the machine and do not contact any other structure or object. This in-
cludes the ground, adjacent buildings, poles, and any other objects that are not part of the aerial
platform.
Such contact could make your body a conductor to the other object, creating an electrical shock
hazard resulting in death or serious injury.
Ifanaerialplatformisin contactwithanenergizedconductortheplatformoperatormustwarnground
personnelinthe vicinityto stayaway.Theirbodiescanconductelectricitycreatinganelectricalshock
hazard resulting in death or serious injury.
Do not approach or leave the aerial platform until the electricity has been turned off.
Do not attempt to operate the lower controls when the platform, boom structure, or any part of the
aerialplatformisincontact withahigh-voltageelectricalconductoror ifthereisanimmediatedanger
of such contact.
Personnel on or near an aerial platform must be continuously aware of electrical hazards, recogniz-
ing that death or serious injury can result from contact with an energized conductor.
© Snorkel International, Inc. – all rights reserved Printed in the U.S.A.
California
Proposition 65 Warning
Battery posts, terminals and related accessories contain lead
andleadcomponents,chemicalsknowntotheStateofCalifornia
to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
California
Proposition 65 Warning
Diesel and gasoline engine exhaust and some of its constituents
areknownbytheStateofCaliforniatocausecancer,birthdefects
or other reproductive harm.

A62JRT – 104897-000 i
General Information
About This Manual
ThismanualcoversA62JRTaerialplatforms.Information
is included for machines that have been manufactured
to conform to all applicable requirements of the follow-
ing organizations:
American National Standards Institute (ANSI)
Canadian Standards Association (CSA)
European Committee for Standardization (CE)
Australian Standards (AS) certication
Part pages include a drawing and a bill of material.
The bill of material lists the item number that is on the
drawing, the Snorkel part number, quantity used and a
description of the item.
Some callouts in the drawings may have a balloon with
two numbers. The top number is the item number and
the bottom number is the quantity of the item at that
location.
While Snorkel has attempted in every way to conrm that
all information in this manual is correct, improvements
are being constantly made to the machine that may not
be reected in this manual.
If you nd information in this manual that is not correct
or is confusing, you are urged to report your ndings to
Snorkel for our evaluation. Your input is important to us
and will be used in future printings of this manual.
This machine is covered by a limited warranty that spe-
cically identies items covered by Snorkel and those
items covered by original manufacturer's warranty.




Repairs and Maintenance
Every person who maintains, inspects, tests or repairs
the machine must be qualied and authorized to do so.
Caution
Do not modify this aerial platform without prior writ-
ten consent of Snorkel Engineering Department.
Modication may void the warranty, adversely affect
stability or affect the operational characteristics of
the aerial platform.
Abbreviations
The following abbreviations may be used in this man-
ual.
AC alternating current
ANSI American National Standards Institute
AR as required
CCA cold cranking amps
cm centimeter
DC direct current
ft feet
GFCI ground fault circuit interruptor
in inch
lbs pounds
mm millimeter
no number
NPT national pipe thread
psi pounds per square inch
qty quantity
rpm revolutions per minute
UL Underwriters Laboratories Inc.
Additional Information
All correspondence relative to this machine, such as eld
reports, discrepancy reports, requests for information,
etc., should be directed to:
Snorkel North America
P.O. Box 1160
St. Joseph, MO 64502-1160 USA
Phone: [phone]
Snorkel Europe
Vigo Centre
Birtley Road
Washington
Tyne & Wear
NE38 9DA
Phone: [phone]
http://www.snorkellifts.com

A62JRT – 104897-000
Service and Parts Information
Ordering Parts
When placing an order for service or repair parts,
please have the following machine information readily
available.
Model number
Serial number
Snorkel part number
Description of part
Quantity of parts required
Your purchase order number
Address for order to ship to
The desired shipment method
The parts order form on the following page may be
mailedorfaxedtothe attention of the Parts Department
at the following location:
Snorkel North America
P.O. Box 1160
St. Joseph, MO 64502-1160 USA
Phone: [phone]
Parts Fax: [phone]
Snorkel Europe
Vigo Centre
Birtley Road
Washington
Tyne & Wear
NE38 9DA
Phone: [phone]
Parts Fax: [phone]
Attention: Parts Department
For your convenience, our electronic on-line ordering
system is available at the following Internet location:
http://www.snorkellifts.com
ANSI and OSHA Compliance
All owners and users of the aerial platform must read,
understand and comply with all applicable regulations.
Ultimatecomplianceto OSHAregulationsis therespon-
sibility of the user and their employer.
ANSI publications clearly identify the responsibilities
of all personnel who may be involved with the aerial
platform.Areprint of the “Manual of Responsibilities for
Dealers, Owners, Users, Operators, Lessors and Les-
sees ofANSI/SIAA92.5-2006 Boom-Supported Elevat-
ingWorkPlatforms”is availablefromSnorkeldealersor
from the factory upon request.
Copies are also available from:
Scaffold IndustryAssociation, Inc.
P.O. Box 20574
Phoenix, AZ 85036-0574 USA








Manuals
Manuals are available from Snorkel to support any of
the machines that we produce.
The specic manuals for A62JRT aerial platforms are
as follows:
A62JRT Operator’s Manual
Snorkel part number (ANSI) – 104898-000
Snorkel part number (CE) – 104850-000
Snorkel part number (Spanish) – 1430534
A62JRT Repair Parts Manual
Snorkel part number – 104897-000
ANSI Manual of Responsibilities
ANSI/SIAA92.5-2006
Snorkel part number – 0084053
Machine Information
Model Number:
Serial Number:
Date of Purchase:
Purchased From:
Snorkel Dealer or Distributor:
ii

A62JRT – 104897-000 iii
Parts Order Form
Date:
Company:
Address:
Contact Name:
Phone Number:
Fax Number:
Account Number:
Purchase Order Number:
Model Number:
Serial Number:
Ship To:
Shipping Method:
Part Number Description Quantity
Note: Backordered parts will be shipped as soon as available using the same shipping method as the original
order unless otherwise indicated below.
Ship complete order only. Do not backorder parts.
Ship all available parts and disposition of backordered parts.
Other instructions as specied:
Fill out completely and fax attention Parts Department to:
Snorkel USA 1-785-989-3077
Snorkel Europe [phone]

REPAIRPARTS
A62JRT PARTS MANUAL CHASSIS ASSEMBLY
CHASSIS ASSEMBLY Wed Feb 24 07:58:28 UTC 2021 2-1

アイテム 部品番号 名前 数量 UOM
Not
Shown 104601-000 CHASSISASSEMBLY EA
1 106524-100 CHASSISWELDMENT 1 EA
2 106527-000 CHASSISCASTING1000LB
(T40RT/TB40machineswith750
lbplatform)
1 EA
3 104603-000 FRONTAXLEASSEMBLYA62JRT 1 EA
4 106564-100 AXLELOCKPIN 4 EA
5 106562-100 AXLEPIN 2 EA
6 065214-001 RODEND1/2X3-1/2 2 EA
7 104604-000 REARAXLEASSEMBLYA62JRT 1 EA
8 104715-000 ROTATIONBEARINGBOTTOM
SPACER 1 EA
9 100244-001 BEARING-rotation 1 EA
10 065214-000 RODEND3/8" 4 EA
11 PNNA BLTHEXHDM24-3.00X
100MMGR10.9 4 EA
12 PNNA M24FLATHARDWASHER 4 EA
13 5560695 BoLTHEXHDM10-1.50X45MM
GR8.8 4 EA
14 5560356 WSHRLOCK10 12 EA
15 056069-010 Washer,SteelFlatWasher
DIN125AM10ZincPlated 18 EA
16 5560719 NUTHEXLKGM10-1.50GR
8.8 2 EA
17 5560626 BLTHEXHDM10-1.5X30MM
GR8 10 EA
18 011239-010 WASHER,FLATASTMA3255/8" 20 EA
19 104738-000 HHBLT.625-11X5.0GR8 20 EA
20 PNNA BLTHHDM8-1.25X45GR8.8
BLTHHDM8-1.25X45GR8.8 1 EA
21 5560613 WASHERFLATM8 2 EA
22 5560727 NUTHEXLKGM8-1.25 1 EA
23 106907-000 FITTING1/4NPTMALE90° 1 EA
A62JRT PARTS MANUAL CHASSIS ASSEMBLY
CHASSIS ASSEMBLY Wed Feb 24 07:58:28 UTC 2021 2-1

A62JRT PARTS MANUAL CHASSIS ASSEMBLY
CHASSIS ASSEMBLY Wed Feb 24 07:58:29 UTC 2021 2-1

アイテム 部品番号 名前 数量 UOM
24 104672-000 TurntableurntableSTOP 2 EA
25 104664-000 AXLELOCKCYLINDER 2 EA
26 100432-002 HydFitting-StraightORFS(04)-
SAE(04) 4 EA
27 106792-100 THRUSTRING,(U.H.M.W.) 4 EA
28 511376-000 Washer,AxleStop 2 EA
29 511375-000 Spacer,1mmOcillatingcillating
AxleStop 2 EA
30 511374-000 Spacer,2mmOcillatingcillating
AxleStop 6 EA
31 511373-000 Stop,OscillatingscillatingAxle 2 EA
32 510683-025 M10X25HEXBOLT(NOT
SHOWN-OPTION) 2 EA
A62JRT PARTS MANUAL CHASSIS ASSEMBLY
CHASSIS ASSEMBLY Wed Feb 24 07:58:29 UTC 2021 2-1

REPAIRPARTS
A62JRT PARTS MANUAL FRONT AXLE ASSY
FRONT AXLE ASSY Wed Feb 24 07:58:29 UTC 2021 2-2

アイテム 部品番号 名前 数量 UOM
- 104603-000B FRONTAXLEASSY EA
1 106526-100 FRONTAXLEWELDMENT 1 EA
2 068456-001 STEERINGCYLINDER 1 EA
3 106532-100 STEERINGYOKELH 1 EA
4 106533-100 DRAGLINK 2 EA
5 106595-000 BEARINGMRP0812-161/2"ID
3/4"OD1"LONG 2 EA
6 104731-000 BEARINGCRG25-30-3825IDX
30ODX38LONG 2 EA
7 104732-000 Bearing,AxlePivot 2 EA
8 104730-000 BEARINGCRG5058-4050IDX
58ODX40LONG 4 EA
9 104759-000 THRUSTWASHER
MWXTM5075-3 2 EA
10 106560-100 FRONTAXLEUPPERKINGPIN 2 EA
11 106563-100 STEERINGPIVOTPIN 2 EA
12 106561-100 LOWERKINGPINWELDMENT 2 EA
13 104622-000 DRIVEWHEELASSY 2 EA
14 106718-001 WHEEL&TIREASSEMBLYLH
FOAMFILLED‒ansiOPTION/CE
STANDARD
1 EA
15 106532-101 STEERINGYOKER.H. 1 EA
16 106717-001 WHEEL&TIREASSEMBLYRH
foamFILLED‒ansiOPTION/CE
STANDARD
1 EA
17 5563044 BOLT,SKTHDSHLDR.5001.75 2 EA
18 5560033 .375-16UNCHEXLOCKNUT 2 EA
19 PNNA BLTHEXHDM12-1.7545MM
GR10.9 4 EA
20 5560699 FLATWASHERM12 8 EA
21 5563078 NUTHEXLKGM12-1.75 4 EA
22 5569917 BLTHEXHDM1090MMGR8.8 2 EA
23 5560719 NUTHEXLKGM10-1.50GR
8.8 2 EA
A62JRT PARTS MANUAL FRONT AXLE ASSY
FRONT AXLE ASSY Wed Feb 24 07:58:29 UTC 2021 2-2

アイテム 部品番号 名前 数量 UOM
24 5560355 WSHRLOCKM8 10 EA
25 5560613 WASHERFLATM8 8 EA
26 5560627 BLTHEXHDM8-1.25X35MM 6 EA
27 PNNA BLTHEXHDM8-1.25X100ALL
THREAD 2 EA
28 PNNA LOCKWASHER.438 4 EA
29 986179 WSHR7/16FLAT 4 EA
30 PNNA BLTHEXHD.625-11X2GR5 12 EA
31 5563058 WASHERFLATHARD.656 12 EA
32 011469-006 LugNut-5/8-18RH 18 EA
33 106868-000 PINCAP 2 EA
34 5560357 BLTHEXHDM8-1.2525MMGR
8.8 2 EA
35 104767-000 FTG,90°,6MORFFX8MORB 2 EA
36 100434-004 HydFitting-90ElbowORFS(04)-
SAE(06) 2 EA
37 100432-002 HydFitting-StraightORFS(04)-
SAE(04) 2 EA
38 011934-004 6MBX6MJ90°FITTING 2 EA
39 5563116 Bolt,HDD 4 EA
40 106964-000 12MBX10MORFFSTRFITTING 4 EA
A62JRT PARTS MANUAL FRONT AXLE ASSY
FRONT AXLE ASSY Wed Feb 24 07:58:29 UTC 2021 2-2

REPAIRPARTS
A62JRT PARTS MANUAL REAR AXLE ASSY
REAR AXLE ASSY Wed Feb 24 07:58:29 UTC 2021 2-3

アイテム 部品番号 名前 数量 UOM
- 104604-000B REARAXLEASSY EA
1 106744-100 REARAXLEWELDMENT 1 EA
2 104665-000 DRIVEMOTORHYD38cc/9.22cc 2 EA
3 116324-000 WheelGearbox 2 EA
4 106717-001 WHEEL&TIREASSEMBLYRH
foamFILLED‒ansiOPTION/CE
STANDARD
1 EA
5 106718-001 WHEEL&TIREASSEMBLYLH
FOAMFILLED‒ansiOPTION/CE
STANDARD
1 EA
6 104732-000 Bearing,AxlePivot 2 EA
7 106787-000 OSCILLATINGREARAXLEVALVE
ASSY 1 EA
8 5560613 WASHERFLATM8 2 EA
9 5560727 NUTHEXLKGM8-1.25 2 EA
10 0260070 O-Ring 2 EA
11 0260099 O-Ring 2 EA
12 PNNA BLTHHD.625-11X1.750GR5 12 EA
13 5563058 WASHERFLATHARD.656 12 EA
14 986179 WSHR7/16FLAT 4 EA
15 PNNA LOCKWASHER.438 4 EA
16 011469-006 LugNut-5/8-18RH 18 EA
17 100432-002 HydFitting-StraightORFS(04)-
SAE(04) 2 EA
18 100434-004 HydFitting-90ElbowORFS(04)-
SAE(06) 4 EA
19 104767-000 FTG,90°,6MORFFX8MORB 4 EA
20 100434-018 FTG,90°,10MORFFX12MORB 4 EA
21 5560627 BLTHEXHDM8-1.25X35MM 2 EA
22 5563116 Bolt,HDD 4 EA
23 0260430 BUSHINGHYDMOTORMOUNT 4 EA
Not
Shown 106948-000 Rearaxlecover 2 EA
A62JRT PARTS MANUAL REAR AXLE ASSY
REAR AXLE ASSY Wed Feb 24 07:58:29 UTC 2021 2-3

アイテム 部品番号 名前 数量 UOM
Not
Shown PNNA Hexheadboltm101.5x25mm gr8.8 4 EA
Not
Shown 5560356 WSHRLOCK10 4 EA
Not
Shown 986009 WSHRFLAT10 4 EA
A62JRT PARTS MANUAL REAR AXLE ASSY
REAR AXLE ASSY Wed Feb 24 07:58:29 UTC 2021 2-3

REPAIRPARTS
A62JRT PARTS MANUAL TIRES AND WHEELS
TIRES AND WHEELS Wed Feb 24 07:58:29 UTC 2021 2-4

アイテム 部品番号 名前 数量 UOM
- 106717-001 WHEEL&TIREASSEMBLYRH
foamFILLED‒ansiOPTION/CE
STANDARD
EA
1 106717-001 WHEEL&TIREASSEMBLYRH
foamFILLED‒ansiOPTION/CE
STANDARD
1 EA
3 106717-010 "Wheel(CESTANDARD/ANSI
OPTION) 1 EA
4 106717-011 "Tire,barlug355-55D625(CE
STANDARD/ANSIOPTION) 1 EA
Not
Shown 7280054 "rimvalve(CESTANDARD/ANSI OPTION) 1 EA
5 106717-003 decal,dangerwheelposition-CE
ONLY 1 EA
2 106718-001 WHEEL&TIREASSEMBLYLH
FOAMFILLED‒ansiOPTION/CE
STANDARD
1 EA
3 106717-010 "Wheel(CESTANDARD/ANSI
OPTION) 1 EA
4 106717-011 "Tire,barlug355-55D625(CE
STANDARD/ANSIOPTION) 1 EA
Not
Shown 7280054 "rimvalve(CESTANDARD/ANSI OPTION) 1 EA
5 106717-003 decal,dangerwheelposition-CE
ONLY 1 EA
A62JRT PARTS MANUAL TIRES AND WHEELS
TIRES AND WHEELS Wed Feb 24 07:58:29 UTC 2021 2-4