Socket DuraScan 700 Series User manual

D700, D730, D740, D745, D750, D755  D760
DS® 700 S
U G

Table of Contents
2
Package Contents 4
Optional Charging Accessories 4
Product Information 5
Attach wristrap 6
Charge the Battery 7
Power Adapter 7
Powering on/off 8
Scanning Barcodes 9
Bluetooth Connection Modes 10-11
Bluetooth connection Roles 12
Data Mode-For SPP mode only 13
Bluetooth Re-Connection 14
How to setup our scnner
Download our Companion App 15
Cn’t use Compnon App
How to setup our scnner n Applcton Mode
Apple® 16
Android 17
Windows 18
How to setup our scnner n Bsc Mode
Apple 19
Android 20
Windows 21
Pairing reset 22
Factory Reset 23
Restore Method 24
Battery Replacement 25

3
Quick Programming 26-32
Status Indicators 33-36
Helpful Resources 37
Battery Warning, Safety, Compliance, Warranty 38

DuraScan
D700 Series
Charging Cable Insert Card
Package Contents
Wrist Strap
Thn ou for choosn Socet Moble Let’s et strted
© 2022 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan®, DuraSled®, Socket Mobile DuraCase™
Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Microsoft® is a registered trademark of
Microsoft Corporation in the United States and other countries. Apple®, iPad®, iPad Air®, iPad mini®, iPad Pro®, iPhone®, iPod touch®,
Objective-C®, Swift™, and Xcode® are registered trademarks of Apple, Inc., registered in the U.S. and other countries. The Bluetooth®
Technology word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket
Mobile, Inc. is under license. Other trademarks and trade names are those of their respective owners.
Optional Charging Accessories
Charging Stand AC Power
Supply
International
Adapters available
Charging CradleCharging Dock
4

Product Information
5
The DuraScan 700 Series has a protection rating of IP54 for dust and water protection.
Socket Mobile’s barcode readers can be wiped clean with a cloth dampened with isopropyl alcohol
or water. Or, the barcode readers can be wiped clean with a Sani-Cloth.
Warning: DO NOT IMMERSE IN WATER (reader’s mechanics could be damaged)
*Also used to display the on-screen keyboard in Basic Keyboard Mode (iOS only).
Reader head
Product label
Lanyard Eyelet
Scan Indicator Light
Scan button
Power button*
Battery Light
(Green/Yellow/Red)
Bluetooth Light (Blue)
Charging pins
Power Connector
Stand Attachment
Battery Door

Attch the Wrst Strp (optional)
1. Detach the string loop of the tether from the wrist strap.
2. Feed the string loop through the eyelet.
3. Pull the tether through the string loop.
4. Pull tight so the string loop is secure.
5. Reattach the string loop’s tether to the wrist strap.
attach wristrap
6

The reader must be fully charged before first use. Please allow 8 hours
uninterrupted charging for the initial battery charge.
Lift the rubber flap to access the power connector.
• Yellow Light = Charging
• Green Light = Fully charged
Importnt: Charging from a computer USB port is not reliable and not
recommended.
Charge the Battery
Rubber Flp
To open Power Adpter
7

Powern On
Press and hold down the small
power button until the Battery
light turns on and the reader
beeps twice (low-high).
Powern Off/ Dsconnectn
Press and hold down the small
power button until the reader beeps
twice (high-low) and all lights turn
off.
The reader will power off
automatically if device is not
connected within 5 minutes. Reader
connected to a device will power off
within 2 hours if idle/inactive.
Powering on/off
8
Power button

1D/2D Brcode nd OCR
Aim the scan beam straight across the entire barcode
Scnnn Brcodes
1. Hold the barcode reader 4-5 inches away from the barcode.
Note: Distance between the reader and barcode depend on the size of the
barcode.
2. Aim, press and hold the trigger button.
By default, the reader will beep, vibrate, and the scan indicator will flash green
to confirm a successful scan.
Cuton: Do not stare directly into the reader’s light beam.
Scanning Barcodes
9
scan button

Opertn Sstem Connecton Optons
Operating
Systems
(OS)
Devices
Bluetooth
HID
Support
Bluetooth
SPP
Support
Bluetooth
Apple
Serial
Specific
(MFi Mode)
Android Android 4.0.3 &
later Yes Yes N/A
Apple iOS iPod, iPhone, &
iPad Yes N/A Yes
Windows
PC Windows 8, 10, 11 Yes Yes N/A
Mac OS
Mac OS X 10.4 to
10.X
Mac Books, Mac
Mini, &iMac
Yes No N/A
Note: To switch from one mode to the other you must remove the
pairing information from both devices - host device and the reader. (see pairing
reset procedure on page 24)
Bluetooth Connection Modes
10