Socket CHS 7Ci User manual

Choose 2Rent
Phone [phone]
Fax [phone]
[e-mail]
www.choose2rent.com
page 1 of 3
1. Powering ON:
Press and hold down the small
power button until the LED
turns
blue and the
scanner beeps
twice
2. Powering OFF:
Press and hold
down the small
power button until
the scanner beeps
twice.
3. Scanning Barcodes
After connecting the scanner to your
device, open an application. Put the
cursor where you want to enter data.
Hold the scanner about 4 inches from
the barcode and press and hold the
trigger button. Keep your hand steady
and make sure the red beam covers the
entire width of the barcode.
By default, the scanner will beep and
vibrate, and the LED will flash green to confirm that data was decoded
and sent to the host device.
4. Simultaneous Scanning and Soft Keyboard Support
The Scanner supports simultaneous use of the barcode scanner and
the Apple iOS on-screen keyboard while entering data into an
application.
To open or close the onscreen keyboard, quickly double-press the
power button (like double-clicking a mouse).
After you double-press the power button, the CHS will beep to
indicate that the onscreen keyboard was enabled / disabled.
Watch a video: http://www.youtube.com/watch?v=VhtttoC6ROs
Use your Bluetooth Scanner 7Ci

page 2 of 3
5. Pair the Scanner with the Apple device:
-Power on the Scanner
-Make sure the scanner is set to HID
Keyboard mode (default). If needed,
scan this barcode to set it to the
correct mode. The CHS will beep 3
times.
-Enable Bluetooth on the Apple device. Search for Bluetooth devices
-In the list of found devices, select Socket CHS [xxxxxx]. If
prompted, tap Pair.
6. Unpairing the scanner from your iPad or
iPhone
Power on the scanner. Press and hold the
TRIGGER and the POWER button together. After
you hear 3 beeps, release both buttons. The
scanner will unpair and power off.
7. BEEP Settings
Enables the Scanner to beep to indicate successful scans.
Disables the Scanner from beeping to indicate successful scans.
For full instructions visit:
http://www.socketmobile.com/pdf/data-collection/chs-7c_qs.pdf
Please call our support team if you need assistance
setting up your rental devices - 1(800) 622-6484

page 3 of 3