Socket CHS 7DiRx User manual

QUICK START GUIDE
Bluetooth®Cordless Hand Scanner (CHS)
1D Imager Models — CHS 7Ci, 7Di, 7DiRx
Model shown: CHS 7Di
This document pertains to the following CHS models:
•7Ci gray SKU# CX2870-1409 (P/N 8550-00062)
•7Ci yellow SKU# CX2883-1480 (P/N 8550-00068)
•7Ci red SKU# CX2885-1484 (P/N 8550-00070)
•7Ci blue SKU# CX2887-1486 (P/N 8550-00071)
•7Di SKU# CX2877-1472 (P/N 8550-00065)
•7DiRx SKU# CX2879-1474 (P/N 8550-00066)
The part number (P/N) is labeled inside the battery compartment.
© 2010-2013 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, SocketScan, Socket Bluetooth Cordless Hand Scanner, and Business Mobility Now! are registered
trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is
under license. All other trademarks and trade names contained herein may be those of their respective owners.
LED
Trigger button
Power button
(also for iOS Keyboard Pop-up)

2
PACKAGE CONTENTS
•Socket Bluetooth Cordless Hand Scanner (CHS)
•Lanyard / belt clip with retractable tether
•Rechargeable batteries (2)
•AC adapter
•USB to DC plug cable
HELPFUL RESOURCES
Software and Documentation Downloads:
Download the latest software and documentation from:
http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
•User’s Guide: Full installation and usage instructions.
•Command Barcodes: Scan to configure the CHS. Many are at the end of this
Quick Start Guide. For a full set, download Command Barcodes Sheet.
Product Registration:
Need technical support? Want special offers? Register your product online:
http://support.socketmobile.com/
Alternatively, if you install SocketScan 10 software for Android / Windows /
BlackBerry OS or Scanner Settings for iOS, you can use it to register the CHS.
Technical Support:
•Online Knowledge Base: http://support.socketmobile.com/EU_S1a.asp
•Online Requests: Register to submit an inquiry. http://support.socketmobile.com
•Phone: [phone] USA/Canada 800-279-1390 EU [phone]
Software Development Kit:
SocketScan 10 SDK for Apple iOS, Android, Windows and BlackBerry is
available to members of the Socket Mobile Developer Program ($19.95 / year).
Learn more at: http://developer.socketmobile.com/
Thank you for choosing Socket Mobile!

3
SCANNER SETUP
Insert the Batteries:
Unlock the battery cover by using a
screwdriver or coin to turn the lock
under the CHS to a horizontal position.
Remove the battery cover.
Install the batteries in their correct position as
indicated by the +/- symbols.
IMPORTANT! Only use NiMH batteries.
Attach the Lanyard (Optional):
Wrap the string loop of the tether around the
inside part of the lock.
Replace the battery cover and lock it by turning
the lock into a vertical position.
Charge the CHS:
The CHS must be fully charged before first use.
Initial charging takes about 5 hours.
For the 7Di or 7DiRx, lift the rubber flap to
access the power connector.
•Red LED = Charging
•Green LED = Fully charged
Charging from a computer USB port is not
reliable and not recommended.

4
BASIC FUNCTIONALITY
Powering ON:
Press and hold down the small power button until the
LED turns blue and the CHS beeps twice (low-high).
Powering OFF / Disconnecting:
Press and hold down the small power button until the
CHS beeps twice (high-low).
Scanning Barcodes:
After connecting the CHS to your device, open an
application. Put the cursor where you want to enter data.
Hold the CHS about 4 inches (10 cm) from the barcode
and press and hold the trigger button. Keep your hand
steady and make sure the red beam covers the entire
width of the barcode.
By default, the CHS will beep and vibrate, and the LED
will flash green to confirm that data was decoded and
sent to the host device.
BLUETOOTH PAIRING
Automatic Reconnections:
After you power on the CHS, it will automatically try to
connect to the last device it paired and connected to.
•Make sure the device is in range with Bluetooth on.
•If using SPP mode, make sure SocketScan 10 software
or an application developed with SocketScan 10 SDK is
running.
If the CHS is connected to a device and gets disconnected, it
will try to reconnect for a few minutes. Make sure the
device is on and in range. If the CHS cannot reconnect, it
will emit a long beep. Press the trigger button to restart
the reconnection process.
Unpairing the CHS: Deleting the Bluetooth Pairing
In most cases, if the CHS is paired with a device, you
should unpair it before trying to connect to a new
device.
1. Power on the CHS.
2. Press and hold down the trigger button.
3. Press and hold down the power button.
4. After you hear 3 beeps, release both buttons.
5. The CHS will unpair and automatically power off. The
next time you power on the CHS, it will be discoverable.

5
HID vs. SPP vs. iOS MODE
The CHS supports three modes, based on different types of Bluetooth connections:
•Human Interface Device (HID):Default mode of CHS. No software installation required.
•Serial Port Profile (SPP): Highly recommended, allows two-way communications with
Android, BlackBerry and Windows. SocketScan 10 software installation required.
•iOS:Highly recommended, allows two-way communications with Apple iOS devices.
Compatible application developed with SocketScan 10 SDK required.
OS Apple iOS Android OS
Windows
Embedded*/ PC
BlackBerry
OS
Most Other
OS**
HID 2.2 and
later with HID
support

SPP 2.1 and
later

iOS compatible
app required

*Windows Embedded Handheld only **Includes Mac OS, Windows RT, Linux, etc.
By default, the CHS is set to HID mode for Keyboard devices, which requires no
software installation.
For easiest setup, choose HID mode if supported by your device:
1. Charge.
2.Connect scanner.
3. Scan barcodes.
To learn how to connect by scanning a custom barcode, refer to the User’s Guide.
To change modes, use command barcodes (page 11).

6
APPLE IOS
HID (KEYBOARD) MODE
To pair the CHS with the Apple device: (required only the first time you connect)
1. Power on the CHS.
2. Make sure the CHS is set to HID Keyboard mode (default). If needed, scan this barcode
to set it to the correct mode. The CHS will beep 3 times.
3. Enable Bluetooth on the Apple device. A Bluetooth device search will begin.
4. In the list of found devices, select Socket CHS [xxxxxx]. If prompted, tap Pair.
The characters in brackets are the last 6 characters of the Bluetooth Address, which
is labeled in the CHS battery compartment.
5. After the CHS connects and is ready to scan barcodes, it will beep once.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
To access the onscreen keyboard while connected to the CHS:
See a video demo at: http://www.youtube.com/socketmobile#p/u/5/VhtttoC6ROs
1. Make sure the CHS is connected to your Apple device.
2. Open your application and place the cursor where you want to enter data.
3. Quickly double-press the power button of the CHS (like double-clicking a mouse) to
open or close the onscreen keyboard.

7
APPLE IOS
iOS MODE
IMPORTANT! Follow the instructions below ONLY if you are using a
compatible iOS application developed with SocketScan 10 SDK!
To view a selected listing of compatible apps developed with SocketScan 10 SDK,
please visit: http://www.socketmobile.com/appstore
The proper setup instructions may vary depending on your application. Follow the
instructions provided by your software application developer.
To install the software:
Install a compatible application onto your device that was developed with SocketScan 10
SDK. Follow the installation instructions from the application developer.
To pair the CHS with the Apple device: (required only the first time you connect)
1. Power on the CHS and scan this barcode. The CHS will beep 3 times.
2. Open the application.
3. Enable Bluetooth on the Apple device. A Bluetooth device search will begin.
4. In the list of found devices, select Socket CHS [xxxxxx]. If prompted, tap Pair.
The characters in brackets are the last 6 characters of the CHS Bluetooth Address,
which is labeled in the CHS battery compartment.
5. Go to your application. It will attempt to connect your device to the CHS.
Now you are ready to scan barcodes into your compatible application, see
instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.

8
ANDROID OS
SPP MODE
The instructions below are based on the Asus Nexus 7 running Android OS 4.2.
Instructions for other devices may slightly differ. For Bluetooth HID instructions,
please see the User’s Guide.
To install the software and configure your device:
1. If you installed barcode scanning software for your device camera, scan this
barcode to launch the SocketScan 10 page in Google Play. Alternatively,
open Google Play and search for SocketScan 10 Keyboard Wedge software.
2. Follow the on-screen instructions to download and install SocketScan 10 software.
If prompted, allow the app to access your Bluetooth settings / USB storage / SD card.
3. If SocketScan 10 prompts you to turn on Bluetooth, touch Allow.
4. You will be prompted to set SocketScan 10 as the keyboard language. Touch Back .
5. Touch Home | Apps | Settings | Language & input.
6. Under Keyboard & Input Methods, select SocketScan 10. Touch Back .
7. In SocketScan 10, touch Menu | Input Method. Select SocketScan 10. Touch Back .
To pair and connect the CHS and Android device: (required only the first time you connect)
1. Power on the CHS.
2. In SocketScan 10, touch Menu | Socket EZ Pair.
3. Scan the barcode on the screen. The CHS will beep 3 times.
4. Touch On screen. Touch 1D Scanner.
5. Scan the barcode on the screen. The CHS will beep 3 times.
6. When notified of a pairing request, swipe the notification down. Touch Pairing request.
Touch Pair.
7. After the CHS pairs and is ready to scan barcodes, it will beep once. The icon at the top of
the screen will also change (see below). Touch Back .
Status Bar Icon
CHS not connected.
CHS connected.
8. A CHS registration icon will appear on top of the screen. Swipe the icon down to
open the registration software. Follow the instructions to register your CHS.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.

9
WINDOWS PC
SPP MODE
To install the software and configure a COM port:
Windows 8 or 7: Make sure you have administrative privileges to install software.
1. Download the latest SocketScan 10 software from:
http://www.socketmobile.com/support/downloads/data-collection/series7/ss110/
2. Follow the on-screen instructions to install the software. In the last screen, click Finish.
3. In SocketScan Settings, select an incoming Bluetooth serial COM port. Click OK.
Click Ports to create a new incoming COM port or identify an incoming COM port.
To pair the CHS with the PC: (required only the first time you connect)
1. Power on the CHS.
2. Turn on Bluetooth on your computer.
3. Click on the SocketScan 10 icon in the system tray. If the icon does not appear,
open SocketScan 10 by clicking on the desktop shortcut icon.
4. In the pop-up menu, click Socket EZ Pair.
5. Scan the barcode on the screen. The CHS will beep 3 times.
6. Click On screen. Click 1D Scanner.
7. Scan the barcode on the screen. The CHS will beep 3 times.
8. You will be notified of a connection request. Click on the notification balloon.
9. After the CHS connects and is ready to scan barcodes, it will beep once. The system tray
icon will also change (see below).
Task Tray Icon
CHS not connected. CHS connected.
10. Close Socket EZ Pair. The Registration screen will appear. Follow the instructions to
register your CHS.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.

10
WINDOWS PC OR WINDOWS EMBEDDED
HID (PERIPHERALS) MODE
To pair the CHS with the PC or PDA:(required only the first time you connect)
1. Power on the CHS and scan this barcode. The CHS will beep 3 times.
2. Turn on Bluetooth on your PDA or PC and start a device search.
3. Select Socket CHS. If prompted for a passkey, enter 0000 (four zeroes). If prompted
to select services, select Input Device.
4. After the CHS connects and is ready to scan barcodes, it will beep once.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
BLACKBERRY OS
SPP MODE
SocketScan 10 software works with BlackBerry OS 5.0.0.714 or later for Bold 9700.
Other phones may be compatible. For instructions for the Bold 9900, please visit:
http://www.socketmobile.com/pdf/data-collection/chs-7ci_blackberry-9900.pdf
To install the software: On your phone, open http://www.socketmobile.com/blackberry
Follow the instructions to download and install the software.
To pair the CHS with the phone: (required only the first time you connect)
1. Power on the CHS and scan this barcode. The CHS will beep 3 times.
2. Use the phone’s Bluetooth software to start a device search.
3. Select Socket CHS. If prompted for a passkey, enter 0000 (four zeroes).
4. In the Home screen, click Downloads | SocketScan 10. If prompted to grant trusted
application status, click Yes.
5. Click Menu | Socket EZ Pair. Click 1D Scanner. If prompted, select your CHS.
6. After they pair and connect, the CHS will beep once to confirm the connection, then
beep twice to signal a disconnection. Click Menu | Close to close Socket EZ Pair.
7. SocketScan 10 will try to connect to the CHS. If asked to confirm, click Yes. After the
CHS connects and is ready to scan barcodes, it will beep once.
8. Close Socket EZ Pair by clicking Menu | Close. The CHS registration screen will
appear. Follow the instructions to register your CHS.
Now you are ready to scan barcodes, see instructions on page 4.

11
COMMAND BARCODES
Scan command barcode(s) to quickly configure the CHS.
Make sure the CHS is not connected to a host computer or device before
scanning a command barcode!
To use the CHS on multiple hosts, perform the unpair sequence. For
instructions, see page 4.
By default, the CHS is in HID mode as a Keyboard device.
For a complete set of command barcodes, download the Command Barcodes Sheet:
http://www.socketmobile.com/pdf/data-collection/command-barcodes-sheet-7C.pdf
Bluetooth Connection Modes
HID-Keyboard (default)
Configures the CHS to Human Interface
Device (HID) mode as a Keyboard class device.
SPP Mode
Changes the CHS to Serial Port Profile (SPP)
mode.
iOS Mode
Changes the CHS to iOS mode.
Factory Defaults
Factory Reset
Configures the CHS to revert all settings to
factory defaults. The CHS will power off after
scanning this barcode.

6/2013 Printed in USA 6430-00338 K
Beep Settings
Beep after CHS Decodes
Data ON (default)
Enables CHS to beep to
indicate successful scans.
Beep after CHS Decodes
Data OFF
Disables CHS from beeping
to indicate successful scans.
Beep after Host Receives
Data ON (default)
Enables CHS to beep after a
host computer or device
acknowledges a successful
scan.
Scan with CHS in SPP mode.
Beep after Host Receives
Data OFF
Disables CHS from beeping
after a host computer or
device acknowledges a
successful scan.
Scan with CHS in SPP mode.
Apple iOS Onscreen Keyboard (only for HID mode)
Double-Press to Open
Onscreen Keyboard
Enables CHS to open iOS
onscreen keyboard after CHS
power button double-press
Opens iOS Keyboard - With Beep (default)
Opens iOS Keyboard – No Beep
Disable Double Press
Disables double press
feature for the CHS.