solarwatt Vision 60M high power User manual
| |EN
SOLARWATT
INSTALLATION INSTRUCTIONS
Actions on structures
Lightning protection
-
VISION 60M HIGH POWER VISION 60M STYLE
VISION 60P VISION 60P STYLE
Congratulations on the purchase of your SOLARWATT Solar Module
The installation and electrical connection of
tions. For the operation, installation, use and
to people. SOLARWATT accepts no responsi
WARNING
local authorities and the network operator.
tests carried out on the products throughout
the entire production process. SOLARWATT
Information on the solar module
Transport and Storage
Procedure in the event of transort damage
You are responsible for checking the goods
note it on the shipping papers describing
each pallet in detail, and take photographs as
Installation
accident prevention regulations, the relevant,
buildings, as well as electrical installations.
suitable substructures, which are designed for
building for the installation of a solar power
NOTE
stalled in locations where there are aggressive
rial to expand without tension.
WARNING
WARNING
to note that these standards are designed for
NOTE
the pressure load calculated in accordance
with the standard based on local snow load
with additional standards, taking into account
additional loads in the event of snow over
encountered in practice and to ensure that our
tion conditions taking into account the shape
substructure
SCREW FIXTURES
Fastening on the fastening holes
1
CLAMPING SYSTEM
Please observe the fastening torque stipulated
2
200 mm
200 mm
Fastening on short sides
areas approved for fastening
substructure
Fastening on short sides
areas approved for fastening
substructure
200 mm
200 mm
Fastening on long sides
areas approved for fastening
substructure
100 mm
100 mm
Fastening of Module on long and short edge
utilized.
substructure
1,150 ± 10 mm
245 ± 5mm
245 ± 5mm
Fastening on long sides and short side
areas approved for fastening
substructure
100 mm
200 mm
100 mm
100 mm
100 mm
Fastening on short sides
areas approved for fastening
substructure
160 mm
160 mm
160 mm
160 mm
200 mm
200 mm
Fastening on long sides
Fastening on short sides
areas approved for fastening
substructure
160 mm
160 mm
160 mm
160 mm
200 mm
200 mm
Fastening on long sides
NOTE
areas approved for fastening
substructure
INSERTION SYSTEM
Vertical installation
3
NOTE
Electrical connection and grounding
plug connectors. The connection of the string
line has to be done with identical connec
connecting cable. To be able to ensure this the
sets, plugs, cables and installation accessories.
the plugs engage with an audible click. The
dule is exposed to light.
WARNING
with unrestricted access, the relevant regula
electrical installation.
Module schematic, front view
Connection lines
String connector
Junction box with bypass diodes
Cell connector
Solar cells
higher voltage than under standardized test
particular attention to cleanliness during ins
strain on the conductors and connections is ru
WARNING
Potential equalization of the solar generator is
can be carried out using the existing grounding
dance with the valid local regulations.
Nut
NOTE
Maintenance and servicing
In exceptional cases, a conventional cleaning
Disposal
collection sites and local civic waste collec
and practical handling for the sale and return
to be returned. We will then coordinate all
Warranty conditions for SOLARWATT-solar modules of the glass-glass generation
ditions applies to Solar Modules which the End
fers the Solar Modules to and operates the Solar
sed SOLARWATT dealer for their own use and not for
•
of the Solar Modules shall not decrease to less
•
SOLARWATT, the output of the Solar Modules
•
the guaranteed output of the Solar Modules is
discretion –
a. repair the Solar Module on site at the End
b.
c.
d. exchange the Solar Module with a replace
of the original Solar Module is transferred to
If SOLARWATT repairs the Solar Module at
SOLARWATT will engage a carrier who will col
ditions covers the transport costs for the ship
be coordinated and aligned with SOLARWATT
SOLARWATT.
SOLARWATT reserves the right to invoice the End
cessful, SOLARWATT is entitled to repeat the
result of
a.
b. not being installed or, if applicable, un
installed or reinstalled, in accordance with
c.
d.
e.
f.
ce, in particular bleaching and discoloration of
vicarious agents.
F Transfer to a new owner
new owner of the Solar Module to the extent of the
the SOLARWATT product dealer, or other proof
shall be provided to SOLARWATT upon request
the spontaneous breakage of the glass without
excluded. SOLARWATT shall in no event and ir
revenue, loss of use, loss of data, cost of capital,
contractual obligations is, however, restricted to
ract, provided no willful intent or gross negligen
health, and SOLARWATT is not liable under pro
NOTES ON COMPLAINTS
Other manuals for Vision 60M high power
1
This manual suits for next models
3
Table of contents
Other solarwatt Solar Panel manuals
solarwatt
solarwatt Vision 60P style User manual
solarwatt
solarwatt Vision 60P style User manual
solarwatt
solarwatt 36M glass User manual
solarwatt
solarwatt BLACK 60M STYLE User manual
solarwatt
solarwatt Vision 60P style User manual
solarwatt
solarwatt Blue 60P/M User manual
solarwatt
solarwatt VISION 36M GLASS User manual
solarwatt
solarwatt BLUE 60M User manual
solarwatt
solarwatt Panel vision AM 3.0 User manual
solarwatt
solarwatt Vision 60M high power User manual
