Sole Fitness F63 User manual

2
Customer Service 1-888-707-1880
Email: [e-mail]
TABLE OF
CONTENTS
Product Registration 3
Important Safety Instructions 4
Important Electrical Instructions 5
Important Operation Instructions 6
Assembly instructions 10
Folding Instructions 14
Transport Instructions 14
Operation of Your New Treadmill 15
Bluetooth® Connectivity 19
Programmable Features 21
General Maintenance 28
Service Checklist - Diagnosis Guide 31
Manufacturer’s Limited Warranty 38
Ver.B

3
Customer Service 1-888-707-1880
Email: [e-mail]
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality treadmill from Dyaco Canada Inc. Your new treadmill has
been manufactured by one of the leading fitness manufacturers in the world and is backed by one of
the most comprehensive warranties available. Dyaco Canada Inc. will do all we can to make your
ownership experience as pleasant as possible for many years to come.
If you have any questions about your new Sole product or questions about the warranty, contact
Dyaco Canada Inc. at 1-888-707-1880.
Please take a moment at this time to record below the name of the dealer, their telephone number
and the date of purchase for easy contact in the future. We appreciate your confidence in SOLE and
we will always remember that you are the reason we are in business. Please go to
www.dyaco.ca/warranty.html and complete the online warranty registration.
Yours in Health,
Dyaco Canada Inc.
Name of Dealer:
Telephone Number of Dealer:
Purchase Date:
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness
product in the space provided below.
Serial Number:
REGISTER YOUR PURCHASE
Please visit us at www.dyaco.ca/warranty.html to register your purchase.

44
Customer Service 1-888-707-1880
Email: [e-mail]
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this equipment.
DANGER - To reduce the risk of electric shock disconnect your SOLE treadmill from the electrical
outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install
the treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet with only
the treadmill plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING
IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.
A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 5.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet
and treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between
the rear of the treadmill and any fixed object.
Keep children under the age of 13 away from this machine. There are obvious pinch points
and other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working
properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position, remove tether cord, then remove the
plug from the outlet.
Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
The pulse sensors are not medical devices. Various factors, including the user’s movement,
may affect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.
Use handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
This equipment is not intended for use by persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the equipment by a person responsible for
their safety.
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!

5
Customer Service 1-888-707-1880
Email: [e-mail]
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent
(10%) or more, the performance of your treadmill may be affected. Such conditions are not
covered under your warranty. If you suspect the voltage is low, contact your local power
company or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The temperature specification is
40 degrees C, and humidity is 95%, non-condensing (no water drops forming on surfaces).
Circuit breakers: Avoid AFCI/GFCI circuit breakers if possible. These breakers may trip
occasionally during use because of the high inrush currents from the treadmill drive motor. This
condition is an issue with all treadmills and other products with large motors or electric heating
elements like ovens.
New laws in your area may require these breakers. If you do have these breakers and outlets in
your home and are experiencing nuisance tripping, you should check to see if there are any other
devices plugged into the same circuit like fluorescent lights with electronic ballasts, coffee maker,
space heater, etc. Optimally the treadmill should be the only device plugged into the circuit.
Our treadmills have surge suppressors built in to help avoid nuisance tripping. We have tested
several AFCI/GFCI breakers and outlets with our products that do not trip when only the treadmill
is connected. Brands we have tested are: Eaton (Cutler Hammer Series), Leviton (Smart lock pro)
and Schneider Electric (Canadian home series).
GROUNDING INSTRUCTIONS
This product must be grounded. If the treadmill should malfunction or breakdown, ground-
ing provides a path of least resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 110-volt circuit and has a grounding plug that looks like the
plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be
used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet
is not available. The temporary adapter should be used only until a properly grounded outlet,
(shown below) can be installed by a qualified electrician. The green colored rigid ear-
lug, or the like, extending from
the adapter, must be connected
to a permanent ground such as a
properly grounded outlet box
cover. Whenever the adapter is
used, it must be held in place by
a metal screw.

66
Customer Service 1-888-707-1880
Email: [e-mail]
IMPORTANT OPERATION INSTRUCTIONS
NEVER operate this treadmill without reading and completely understanding the results of
any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey the
command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components. Unplug the treadmill during an
electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray
from walking in the center of the belt; which may result in serious injury.
NEVER mount or dismount the treadmill while the belt is moving. SOLE treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on
the belt during slow acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go faster or
slower. If you feel the buttons are not functioning properly with normal pressure contact
your SOLE dealer.
SAFETY KEY INSTRUCTIONS
A safety tether cord is provided with this unit and should be used at all times. It is for your safety
should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop
tread-belt movement.
To Use:
1. Place the safety key into position on the console control head. Your treadmill will not
start and operate without this. Removing the safety key also secures the treadmill from
unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power.
Note: The clip should be attached securely to make certain it does not come off. Be
familiar with its function and limitations. The treadmill will stop, depending on speed,
with a one to two step coast anytime the safety key is pulled off the console. Use the red
Stop switch in normal operation.
3. If the console displays "Safety key removed, machine stopped, click Replace the key to
Operate", put the Safety key back to continue using the treadmill.

7
Customer Service 1-888-707-1880
Email: [e-mail]
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE UNPACKING YOUR FOLDING TREADMILL
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the
strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the
treadmill is positioned flat on the ground, in the orientation it would be in if you were using the
treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This could
cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap (that you
need to grab to remove it) happens to be under the treadmill deck, reach under the deck to
grab it, but do not tilt the treadmill up to gain access to the strap end.
PREVENTATIVE MAINTENANCE CHART
Vacuum Under
Motor Cover &
Check Wiring
(Every Other
Month)
Clean & Inspect
Deck for Lubrication
(Every Other Month)
Lubricate Deck
(Every 90 hours
or sooner if dry)
Inspect Belt
Tracking (Monthly)
Adjust if necessary
Date

88
Customer Service 1-888-707-1880
Email: [e-mail]
F63 ASSEMBLY PACK CHECKLIST
2
HARDWARE STEP 2
#128. M5
Speed Nuts Clip (2 pcs)
3
HARDWARE STEP 3
#130. 5/16” x 1/2”
Button Head Socket Bolt (8 pcs)
5
HARDWARE STEP 5
#113. Ø10 x 1.5T
Split Washer (4 pcs)
6
HARDWARE STEP 6
#139. 3/8” x 1-3/4”
Button Head Socket Bolt (4 pcs)
#175. 3.5 x 16mm
Sheet Metal Screws (4 pcs)

9
Customer Service 1-888-707-1880
Email: [e-mail]
7
HARDWARE STEP 7
#159. 5/16” x 3/4”
Button Head Socket Bolt (4 pcs) #75. Safety Key
8
HARDWARE STEP 8
#120. 5 x 16mm
Tapping Screw (2 pcs)
9
HARDWARE STEP 9
#175. 3.5 x 16mm
Sheet Metal Screws (4 pcs)
ASSEMBLY TOOLS
#140
. M5 × 10m/m_
Phillips Head Screw (2 pcs)
#131. Combination M5 Allen Wrench
&
Phillips Head Screwdriver
#132. M6 L Allen Wrench

1010
Customer Service 1-888-707-1880
Email: [e-mail]
F63 ASSEMBLY INSTRUCTIONS
1
ASSEMBLY STEP 1
1. Remove the treadmill from the carton and position it aside on a
smooth, leveled floor. The rear should be at least 3’ from any wall.
You must remove the plastic wrap and Styrofoam from beneath
the unit before removing the Velcro belt. Tilting the unit
sideways after removing the belt may cause the unit to fold
and bounce upwards. This can cause serious injury.
2
ASSEMBLY STEP 2
HARDWARE STEP 2
#128. M5 Speed Nut
Clip (2 pcs)
1. Install two Speed Nut Clips (128) on the left and right sides of the
Frame Base.
2. Slide the Console Mast Covers (64 & 65) onto the console masts.
Take note of the orientation.
3. Slide the Frame Base Covers (62L & 63R) over the Upright tubes (4
& 5). Connect the Lower Computer Cable (50) to the Middle
Computer Cable (49) on the right side of the unit.
Before attaching the hardware in Step 3, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.

11
Customer Service 1-888-707-1880
Email: [e-mail]
3
ASSEMBLY STEP 3 HARDWARE STEP 3
#130. 5/16” x 1/2” Button
Head Socket Bolts (8 pcs)
1. Attach the Upright Tubes (4 & 5) onto the Frame Base (2) with
eight Button Head Socket Bolts (130) by using the
Combination M5 Allen Wrench & Phillips Head Screwdriver
(131). Do not tighten the bolts completely until Step 7 is
finished.
4
ASSEMBLY STEP 4
To complete this step, it is recommended that you find
something to rest the console on at an appropriate height or
have someone hold the console while you connect the cables.
1. Connect the Speed Adjustment Switch Cable (54) to the Speed
Cable, Upper (37). Connect the Incline Adjustment Switch Cable
(55) to the Incline Cable, Upper (38). Connect the Computer
Cable, Middle (49) and Computer Cable, Upper (48). Tuck the
excess cable into the handrail tubing to prevent it from getting
pinched.
Before attaching the hardware in Step 5, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.

1212
Customer Service 1-888-707-1880
Email: [e-mail]
5
ASSEMBLY STEP 5
HARDWARE STEP 5
#139. 3/8”x 1-3/4”
Button Head Socket
Bolts (4 pcs)
#113. Ø 10 x 1.5T Split
Washers (4 pcs)
1. Insert the Console Assembly (52) into the Upright Tubes (4 & 5)
and attach with four Button Head Socket Bolts (139) and four Split
Washers (113). Tighten using the M6 L Allen Wrench (132).
6
ASSEMBLY STEP 6
HARDWARE STEP 6
#175. 3.5 x 16mm Sheet
Metal Screws (4 pcs)
1. Attach the Left (64) and Right (65) Console Mast Covers to the
top of the Upright Tubes (4 & 5) with four Sheet Metal Screws
(175). Tighten with the Combination M5 Allen Wrench & Phillips
Head Screwdriver (131).

13
Customer Service 1-888-707-1880
Email: [e-mail]
7
ASSEMBLY STEP 7
HARDWARE STEP 7
#159. 5/16” x 3/4”
Button Head Socket
Bolts (4 pcs)
#75. Safety Key
1. Attach the Handrail Support (26) between the upright tubes (4
& 5) with four Button Head Socket Bolts (159). Tighten bolts
firmly.
2. Place the Beverage Holder (158) on top of the Handrail Support
(26) as shown in the illustration.
3. Place the magnet of the safety key (75) in between the Start
and Stop buttons (if it isn’t already attached). The treadmill will
not function without this in place.
4. Check to make sure all bolts and screws are completely
tightened.
8
ASSEMBLY STEP 8
HARDWARE STEP 8
#120. 5 x 16mm
Tapping Screws (2 pcs)
#140.M5 × 10m/m
Phillips Head Screw(2 pcs)
1. Finish tightening the button head bolts (from Step 2 and above)
that secure the console masts to the frame.
2. Attach the Frame Base covers (62 & 63) to the Frame Base (2)
with two Tapping Screws (120)and two Phillips Head Screws
(140). Tighten screws using the Combination M5 Allen Wrench &
Phillips Head Screwdriver (131).

1414
Customer Service 1-888-707-1880
Email: [e-mail]
9
ASSEMBLY STEP 9
1. Insert Tablet Holder (177) into the Console Assembly (52) and
use Combination M5 Allen Wrench & Phillips Head Screwdriver
(131) to tighten four of Sheet Metal Screw (175).
FOLDING INSTRUCTIONS
Do not attempt to move the unit unless it is in the folded and locked position. Be sure the
power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to
the desired position.
TO FOLD THE TREADMILL
Make certain that the treadmill is at minimum incline.
Lift the treadmill’s running deck until it is secured by the
locking telescoping tube assembly in the center back of
the base.
TO UNFOLD THE TREADMILL
Apply slight forward pressure* on the treadmill running
deck with one hand. Pull down the unlocking lever and
slowly lower the running deck to the floor. The deck will
descend unassisted when it reaches about waist high.
*At the rear roller area to relieve pressure on the
locking system.
TRANSPORTATION INSTRUCTIONS
The treadmill is equipped with transport wheels that are engaged when the treadmill is folded.
After folding simply roll the treadmill away.
#175. 3.5 x 16mm Sheet
Metal Screws (4 pcs)
HARDWARE
STEP 9

15
Customer Service 1-888-707-1880
Email: [e-mail]
OPERATION OF YOUR TREADMILL
GETTING FAMILIAR WITH THE CONTROL PANEL
F63 CONSOLE
GETTING STARTED
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the Safety Key is installed, as
the treadmill will not power on without it ( see assembly step 7 for reference ).
When the power is turned on, a message will scroll across the Message Window showing the
current software version. Then the Time and Distance Windows will display Odometer readings for
a short time. Time Window will show how many hours the treadmill has been in use and the
Distance Window will show how many miles (or Kilometers if the treadmill is set to metric readings)
the treadmill has gone. The treadmill will then enter idle mode, which is the starting point for
operation.
COOLING FANS
SPEED KEYS
HEADPHONE JACK
SPEAKER
CONTROL KEYS
INCLINE KEYS
AUDIO IN JACK
(MP3, CD, OR
SMARTPHONE)
CONTACT HEART RATE
SENSORS
CHARGE PORTABLE
DEVICES WITH USB PORT

1616
Customer Service 1-888-707-1880
Email: [e-mail]
START OPERATION
1. Attach the Safety Key to wake the display up, if it’s not already on.
2. Press the Start key to begin belt movement. Adjust to the desired speed using the Speed ▲/▼
keys on either the console or handgrip. You may also use the speed keys 2, 3, 4, 5, 7, 9 or 12 to
adjust the speed.
3. To slow down the tread-belt, press and hold the Speed ▼ key on the console or handgrip to the
desired speed. You may also press the speed adjust keys, 2 through 12.
4. To stop the tread-belt, press Stop key or pull away Safety Key.
PAUSE/STOP/RESET FEATURE
1. When the treadmill is running, the pause feature may be utilized by pressing the red Stop key
once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent. The
Time, Distance and Calorie readings will hold while the unit is in the pause mode. After 5
minutes the display will reset and return to the startup screen.
2. To resume your exercise, while in Pause mode, press the Start key. The speed and incline will
return to their previous settings.
Pause is executed when the Stop button is pressed once. If the Stop button is pressed for
the second time, the program will end, and a workout summary will be displayed. If the Stop
button is pressed for the third time, the console will return to the idle mode (startup) screen.
If the Stop button is held down for more than 3 seconds, the console will reset.
INCLINE FEATURE
Incline may be adjusted any time after belt movement.
Press and hold the Incline ▲/▼keys on the console or handgrip to achieve your desired level
of effort. You may also choose a more rapid increase / decrease by selecting desired key, 1, 3, 5,
7, 9, 12 and 15, on the left-hand side of console (incline).
The Incline Window display will indicate incline position as adjustments are made.

17
Customer Service 1-888-707-1880
Email: [e-mail]
DOT MATRIX CENTER DISPLAY
Eighteen columns of dots – each 8 units high - indicate each
segment of a workout for the F63. The dots are only to show an
approximate level of effort in speed or incline. They do not
necessarily indicate a specific value - only an approximate
percent to compare levels of intensity. In operation, the
speed/incline dot matrix window will build a profile “picture” as
values are changed during a workout. When the word “Speed”
is lit above the dot matrix, it indicates that the Speed profile is
being displayed. When the word “Incline” is lit above the dot
matrix, it indicates the Incline profile is being displayed.
You may change the Dot Matrix profile view between Speed
and Incline by pressing the Enter button. After pressing Enter
to view the two profiles, pressing it for the third time will
automatically alternate the Speed and Incline displays, showing each one for five seconds.
MESSAGE WINDOW DISPLAY
The Message Window will initially display Program Name. Each time the Display button is pressed,
the next set of information will appear. The order of information displayed will be: Pace, Incline, Laps,
Verticle, Segment Time, Max Speed (in mph), and Data Scan mode. In Data Scan mode, the
displayed information will change every 4 seconds in the Message Window.
1/4 MILE TRACK
The 1/4 mile track is displayed around the dot matrix window. The flashing dot indicates your
progress. The number of laps you complete are accumulated in the lap counter, which is viewed in
the Message Window.
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note : This is only a rough guide used for comparison of different exercise sessions, which cannot be
used for medical purposes.
There is an Audio Input Jack () on the front of the console and built-in speakers. You may plug any
low-level audio source signal into this port. Audio sources include MP3, iPod, portable radio, CD
player or even a TV or computer audio signal. There is an audio patch cable included and a
headphone jack () for private listening.

1818
Customer Service 1-888-707-1880
Email: [e-mail]
PULSE FEATURE
The Pulse (Heart Rate) Window will display your current heart rate in beats per minute during the
workout. You must use both stainless steel sensors on the front cross bar to display your pulse or wear
the wireless chest strap. The pulse value will display anytime the upper display is receiving a pulse
signal.
TURNING OFF TREADMILL
1. The display will automatically turn off, by going into sleep, after 30 minutes of inactivity when in
the Pause / Stop mode. Almost all power for the treadmill will be off except for some circuits that
are needed to detect if any key is pressed, indicating the console should “wake up”. When the
console is “asleep”the treadmill draws very little power, for about as much as a television turned
off.
2. Removing the Safety Key is similar to entering “sleep” mode. Turning off the main power switch
in the front of the treadmill will completely remove any power.
**ATTENTION**
Your new console comes configured in an in-store ‘Display Mode’ of operation, where the console
will remain powered on unless the main power switch is turned off. To exit the display mode, for
normal operation, press and hold the Stop, Enter and Display keys for 5 seconds; the display will
show: Display mode - On. Use any of the Program, Incline or Speed ▲ keys to change the setting to
Off then press Enter.

19
Customer Service 1-888-707-1880
Email: [e-mail]
Sole App to be used in conjunction with select Apple & Android devices!
In order to help you achieve your exercise goals, Sole has added an exciting new feature to this
product. Your new exercise machine comes equipped with a Bluetooth®transceiver that will allow
it to interact with selected phones or tablet computers via the Sole Fitness App.
Just download the free Sole Fitness App from the Apple Store or Google Play, and follow the
instructions in the App to sync with your exercise machine. This allows you to view current
workout data in three different Display screens on your device. You can easily switch back and
forth from the workout display view to internet/social media/email sites via icons on the display
screen. When your workout is finished, the data is automatically saved to the built-in personal
calendar for future reference.
Our new Sole Fitness App also allows you to sync your workout data to one of many fitness cloud
sites we support: iHealth, MapMyFitness, Record or Fitbit.
Syncing the App with your exercise machine:
After downloading the App, make sure Bluetooth® is enabled on your device, then tap the icon in
the top left corner to search for Sole equipment.
After the equipment is detected, tap Connect. When the App and equipment are synced, the
Bluetooth® icon on the equipment’s console will light up. You may now start using your new Sole
product!
If the treadmill is not connected to the app, the console will display "SYNC" when the workout is
over. You can then connect using your phone or tablet to store workout data in the App. The
console can only store the last workout data. When the treadmill returns to IDLE MODE, workout
data will be erased.
*Note: Your device will need to run on a minimum operating system of iOS 10.1 or Android 6.0 or
above for the Sole Fitness App to operate properly.

20
Customer Service 1-888-707-1880
Email: [e-mail]
The exercise equipment’s Bluetooth device (BLE 4.0) can also be connected to the Bluetooth
wireless heart rate chest strap transmitter (BLE 4.0). The chest strap transmitter can receive signals
even when the App is already in use. In order to do such a functional switch, you need to use the
heart rate key on the keyboard. Take the following steps to achieve this:
1. In idle mode, the heart rate Bluetooth LED on the keypad will not be lit if the Bluetooth
function is currently connected with the App.
2. In idle mode, press the heart rate key on the keyboard. The Bluetooth LED will light on. This
shows that the Bluetooth function is now switched to connect to the Bluetooth wireless heart
rate chest strap. You can wear the Bluetooth wireless heart rate chest strap first then
commence connection. While in connection, the console will show heart rate value via
Bluetooth.
3. When the workout is over, the console will automatically switch its Bluetooth connection
back to the previously connected App.
The exercise equipment can also play music wirelessly via Bluetooth. Turn on your mobile phone
or tablet’s Bluetooth function. Search for the name "Bt-speaker" in your device’s Bluetooth menu.
Tap to connect. Now your device can transmit music to the exercise equipment.
Charge Portable Devices with USB port
USB Port Charging function:
Charge your personal device during your workout using
the fitness equipment’s on-console USB port.
To charge your mobile electronics make sure the fitness
equipment power is on.
Step 1: Connect your USB charging cable (not included) to
the USB Power Port and to your device.
Step 2: Check to make sure your device icon indicates it is
charging.
NOTE：
* USB charging cable is not included, make sure compatible USB charging cable is being used.
** Your device “charging” icon may or may not indicate it is charging. Depending on the amount
of current your particular device requires for charging the icon may not be on but your device is
still charging, but possibly at a lower charge rate.
***The USB port on the console is capable of powering USB devices. It provides up to 5Vdc/1.0
amp of power and meets USB 2.0 regulations. You will not be able to save your workout data to a
USB via this port; it is used for charging purposes only.