Sony MPK-WB User manual

MPK-WB
SERVICE MANUAL
Sony EMCS Co.
MPK-WB
MARINE PACK
2007E0200-1
© 2007.05
Published by KohdaTEC
9-852-187-12
Ver. 1.1 2007.05
US Model
Canadian Model
AEP Model
Chinese Model
SPECIFICATIONS
Material
Plastic (PC, ABS), glass
Water-resistance
O-ring, buckle
Pressure-resistance
To a depth of up to 40 m (132 feet) underwater
Switches that can be externally operated
POWER (Power,) Mode, Shutter, Zoom (W/T,) Flash, Macro,
Self-timer, DISP, MENU, Control, HOME, Playback
Dimensions
Approx. 146 × 89 × 81 mm (5 3/4 × 3 5/8 × 3 1/4 in.) (w/h/d)
(excluding the projecting parts)
Mass
Approx. 440 g (15.6 oz.) (marine pack only)
Included items
Marine Pack (1)
Hand strap (1)
LCD hood (1)
Grease (1)
O-ring (1)
Spacer (1)
Mode dial cap A (1)
Mode dial cap B (1)
Set of printed documentation
Design and specifications subject to change without notice.
MAIN FEATURE
Useable at a depth of up to 40 m (132 feet) underwater.
•This marine pack MPK-WB is exclusively for use with the Sony
Digital Still Camera DSC-W200/W90/W85/W80. (Cyber-shot for this
marine pack is not available in all countries.)
•This marine pack is water-resistant, enabling the digital still camera
to be used in the rain, snow or at the beach.
A loose or nipped O-ring, sand or dirt on the O-ring may cause
water leaks under water.
Be sure to check the O-ring before use.
For details, read the O-ring Maintenance Manual.
a
b
DSC-
W200
DSC-
W90/
W85/
W80
A
B
Before use
You must attach either of the supplied Mode dial caps,
depending on the model of your digital still camera, to
the MPK-WB. See the table for the cap compatible with
your camera.
Attaching the Mode dial cap
Referring to the illustration, align the notch in the Mode
dial cap (a) with the projection on the Mode dial inside
the marine pack (b), and firmly press the cap onto the
dial.
Mode dial cap
Revised-1
Replace the previously issued
SERVICE MANUAL 9-852-187-11
with this Manual.

MPK-WB
2
3
3
8
9
12
13 35
35
36
14
6
6
67
4
17
22 23
23
24
24
24
24
24
25
25
25
25
25
26
27
28
29
30
31
32
32
33
34
20
15
11
10
5
5
1
19
(Note 1)
21
(Note 1)
(Note 1)
23
(Note 1)
23
23
(Note 1)
(Note 1)
(Note 2)
16
Front cabinet block (See page 3.)
1-1. REAR CABINET BLOCK
SECTION 1
EXPLODED VIEWS
Ref. No. Part No. Description Remarks
13-087-452-01 LABEL, CAUTION
23-099-284-01 PACKING, DROP PROTECTION
32-593-524-01 SCREW,TIP1.7X3 SPECIAL
43-100-962-01 HOOD, INNER
53-099-248-01 CAP (B), BUTTON
63-099-247-01 CAP (A), BUTTON
72-589-173-01 RING (DIA 1.5), E
83-099-280-01 LOCK (B), BUCKLE
93-099-282-01 SPRING, BUCKLE
10 2-342-952-01 SCREW (1.7X4 #0-1), TP
11 3-099-281-01 PLATE, BUCKLE LOCK
12 3-099-279-01 LOCK (A), BUCKLE
13 3-100-957-01 RUBBER, MODE A
14 3-100-961-01 RING (DIA. 2.0), E
15 3-100-956-01 HEAD, MODE
16 3-100-953-01 SPACER (A), MODE
17 3-099-278-01 BUCKLE
19 3-099-252-01 SHAFT, BUCKLE
20 3-100-955-01 SPRING, MODE
021 3-100-959-01 O RING (P4-A)
22 3-100-952-01 DIAL, MODE
023 3-099-234-01 O RING (P2-A)
24 3-099-233-01 RETAINER (φ6.0), O RING
25 3-100-933-01 SPRING (C), PUSH BUTTON
26 3-099-244-11 PUSH BUTTON D ( )
27 3-099-244-01 PUSH BUTTON D
28 3-099-245-01 PUSH BUTTON B
29 3-100-958-01 PUSH BUTTON C
30 3-099-246-01 PUSH BUTTON E
31 3-099-246-11 PUSH BUTTON E ( )
32 3-099-285-01 SHAFT, HINGE
33 3-100-951-01 CASE, REAR
*34 3-209-949-01 LABEL, O RING CAUTION
*35 3-212-256-01 CAP (E), BUTTON
36 3-100-954-01 SPACER (B), MODE
Ref. No. Part No. Description Remarks
2
NOTE:
•-XX and -X mean standardized parts, so they may
have some difference from the original one.
•Items marked “∗” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•The mechanical parts with no reference number in
the exploded views are not supplied.
•Accessories are given in the last of the electrical
parts list.
•Abbreviation
CH: Chinese model
CND: Canadian model La 0marquée sont des pièces par
rapport à imperméable à l’eau.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Soyez sûr de vérifier vers le haut
d’imperméable à l’eau après la
réparation.
The marked “0” are parts in relation
to waterproof.
Replace these components with Sony
parts.
Be sure to check up waterproof after
repair.
(Note 1) When putting grease the O-ring (Ref. No. 21, 23), always
use the grease of the blue tube of the accessory. When using
the grease of the yellow tube and the grease of the other Inc.,
it hurts the O-ring and it causes the water leakage.
(Note 2) Only one E-ring (Ref. No.7) is supplied.
Confirma necessarynumber whenyou order.

1-2. FRONT CABINET BLOCK
51 3-100-928-01 PROTECTOR, FRONT
52 3-099-459-01 TP1.7X5 #0
53 3-100-925-01 RETAINER, LENS WINDOW
54 3-100-989-01 GLASS (A), LENS WINDOW
55 3-100-926-01 PACKING (A), LENS WINDOW
56 3-100-990-01 GLASS (B), LENS WINDOW
57 3-100-927-01 PACKING (B), RANGE WINDOW
58 3-099-221-01 PLATE, TRIPOD SCREW
59 3-099-238-01 TP2X8 (PLATE)
60 3-100-924-01 CASE, FRONT
061 3-099-234-01 O RING (P2-A)
62 3-099-233-01 RETAINER (φ6.0), O RING
63 3-100-933-01 SPRING (C), PUSH BUTTON
64 3-100-931-01 PUSH BUTTON (SHUTTER)
65 3-100-932-01 PUCH BUTTON A
66 3-099-248-01 CAP (B), BUTTON
Ref. No. Part No. Description Remarks
3
*67 3-214-173-01 SHEET, GLASS RETAINER
68 3-099-247-01 CAP (A), BUTTON
69 3-100-929-01 ILLUMINATOR
70 3-100-930-01 REFLECTOR
71 2-342-952-01 SCREW (1.7X4 #0-1), TP
72 3-100-935-01 RETAINER (L), MAIN
73 2-593-524-01 SCREW,TIP1.7X3 SPECIAL
74 3-100-934-01 RETAINER (R), MAIN
75 3-099-284-01 PACKING, DROP PROTECTION
76 3-099-223-01 CAP (SHUTTER)
*77 3-214-172-01 CUSHION, FRONT
*78 3-214-171-01 CUSHION (B), WEIGHT
*79 3-214-170-01 CUSHION (A), WEIGHT
80 3-100-937-01 WEIGHT
81 2-589-173-01 RING (DIA 1.5), E
Ref. No. Part No. Description Remarks
La 0marquée sont des pièces par
rapport à imperméable à l’eau.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Soyez sûr de vérifier vers le haut
d’imperméable à l’eau après la
réparation.
The marked “0” are parts in relation
to waterproof.
Replace these components with Sony
parts.
Be sure to check up waterproof after
repair.
(Note ) When putting grease the O-ring (Ref. No. 61), alwaysuse the
grease of the blue tube of the accessory. When using the grease
of the yellow tube and the grease of the other Inc.,
it hurts the O-ring and it causes the water leakage.
51
55
54
56 57
58
60
59
53
52
52
64
76
68
69
81
70 71
77
72
73
73
74
75
80
78
79
65
66
61
62
63
(Note)
67

MPK-WB
4
1-3. ACCESSORIES
O-ring (1)
03-080-065-11
(Note)
Grease (BLUE) (1)
02-582-620-01
(Note)
La 0marquée sont des pièces par
rapport à imperméable à l’eau.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Soyez sûr de vérifier vers le haut
d’imperméable à l’eau après la
réparation.
The marked “0” are parts in relation
to waterproof.
Replace these components with Sony
parts.
Be sure to check up waterproof after
repair.
(Note) When putting grease the O-ring (3-080-065-11), alwaysuse the
grease of the blue tube of the accessory. When using the grease
of the yellow tube and the grease of the other Inc., it hurts the
O-ring and it causes the water leakage.
2-674-692-01 MANUAL, O RING MAINTENANCE
3-097-313-11 MANUAL, INSTRUCTION
(ENGLISH, FRENCH, SPANISH, DUTCH)
(EXCEPT CH)
3-097-313-21 MANUAL, INSTRUCTION
(GERMAN, SWEDISH,ITALIAN, PORTUGUESE)
(AEP)
3-097-313-31 MANUAL, INSTRUCTION
(RUSSIAN, ARABIC, TRADITIONAL CHINESE,
SIMPLIFIED CHINESE, KOREAN) (AEP, CH)
Ref. No. Part No. Description Remarks
Spacer (1)
3-941-348-01
Hand strap (1)
X-2177-142-1
LCD hood (1)
A-1246-313-A
Mode A rubber (1)
(Mode dial cap A)
(For DSC-W200)
3-100-957-01
Mode B rubber (1)
(Mode dial cap B)
(For DSC-W80/W85/W90)
3-214-174-01
Not supplied
individually.

Revision History
Reverse
MPK-WB
Ver.
1.0
1.1
Date
2007.02
2007.05
History
Official Release
Revised-1
Contents
—
Addition of Ref. No. 74 for EXPLODED VIEWS
Correction of Part No. of Instruction Manual
S.M. Rev.
issued
—
Yes
985218712.pdf