Sony BDX-E1000 User manual

MPEG ENCODER UNIT
BDX-E1000
AUDIO INPUT BOARD
BDKP-E1002
4:2:2 PROFILE UPGRADE BOARD
BDKP-E1003
SCRAMBLER BOARD
BDKP-E1004
SCRAMBLER BOARD
BDKP-E1005
INSTALLATION MANUAL
1st Edition (Revised 4)

BDX-E1000
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
DieAnleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt dieAngaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
BDX-E1000 Serial No. 10001 and Higher
BDKP-E1002 Serial No. 10001 and Higher
BDKP-E1003 Serial No. 10001 and Higher
BDKP-E1004 Serial No. 10001 and Higher
BDKP-E1005 Serial No. 10001 and Higher

1 (P)
For the U.S.A.
Attention-when the product is installed in Rack:
(For BDX-E1000)
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
make sure that the rack does not overload the supply
circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confirm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specified limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make
sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
BDX-E1000

1 (E)
BDX-E1000
Table of Contents
Manual Structure
Purpose of this manual ........................................................................................ 3 (E)
Related manuals................................................................................................... 3 (E)
Contents ............................................................................................................... 3 (E)
Trademark............................................................................................................ 3 (E)
1. Installation
1-1. Installation Environment.......................................................................1-1 (E)
1-2. Power Supply ........................................................................................1-1 (E)
1-2-1. Power Specifications ............................................................1-1 (E)
1-2-2. Power Cord...........................................................................1-1 (E)
1-3. External Dimensions .............................................................................1-2 (E)
1-4. Rack Mounting......................................................................................1-2 (E)
1-5. Matching Connectors and Cables..........................................................1-5 (E)
1-6. Input and Output Signal of Connector ..................................................1-6 (E)
1-7. Internal Switches and Indicators ...........................................................1-8 (E)
1-7-1. APR-25 Board ......................................................................1-8 (E)
1-7-2. ENC-40 Board......................................................................1-9 (E)
1-7-3. SY-240 Board.....................................................................1-10 (E)
1-7-4. VPR-33 Board ....................................................................1-12 (E)
1-7-5. IO-158 Board .....................................................................1-13 (E)
1-8. Setting of Resume Function ................................................................1-13 (E)
1-9. Setting for Color Frame Information Transmission............................1-14 (E)
2. Installation of Optional Boards
2-1. General Information for Installation .....................................................2-1 (E)
2-2. BDKP-E1002 Installation .....................................................................2-2 (E)
2-3. BDKP-E1003 Installation .....................................................................2-4 (E)
2-4. BDKP-E1004/E1005 Installation..........................................................2-5 (E)
3. Service Overview
3-1. Cleaning ................................................................................................3-1 (E)
3-2. Periodic Replacement............................................................................3-2 (E)
3-3. ISR (Interactive Status Reporting) ........................................................3-3 (E)
3-3-1. ISR Functions Overview ......................................................3-3 (E)
3-3-2. Usage of ISR Functions .......................................................3-3 (E)
3-3-3. Error Messages.....................................................................3-6 (E)