Sony BKMA-7031 User manual

MPEG DECODER WITH 8CH AUDIO BOARD
BKMA-7031
INSTALLATION MANUAL
1st Edition
Serial No. 10001 and Higher

BKMA-7031
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.

1 (E)
BKMA-7031
Table of Contents
Manual Structure
Purpose of this manual ........................................................................................ 3 (E)
Related manuals................................................................................................... 3 (E)
Contents ............................................................................................................... 3 (E)
1. Installation
1-1. Overview ............................................................................................... 1-1 (E)
1-1-1. BKMA-7031 ........................................................................ 1-1 (E)
1-2. Board Installation .................................................................................. 1-2 (E)
1-3. Functions of Connectors .......................................................................1-4 (E)
1-4. Matching Connectors and Cables.......................................................... 1-4 (E)
2. Service Overview
2-1. Description of Internal Switches and Indicator ..................................... 2-1 (E)
2-1-1. DEC-133 Board .................................................................... 2-1 (E)
2-2. Specifications ........................................................................................ 2-2 (E)
Appendix Parameters

3 (E)
BKMA-7031
Manual Structure
Purpose of this manual
This manual is the installation manual of the BKMA-7031 MPEG Decoder with
8CH Audio Board.
This manual is intended for use by trained system and service engineers, and
describes the information regarding installation.
Related manuals
Besides this Installation Manual, the following manuals are available for the
BKMA-7031.
.MAV-70XGI/BKMA-7010/7020/7021/7030/7031/7040/7045/7050/7060/
7070/PS70
Maintenance Manual Volume 1 (Available on request)
This manual describes the information that premise the service based on parts
replacement (diagnostics, parts replacement, electrical alignment, and circuit
descriptions, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.
.MAV-70XGI/BKMA-7010/7020/7021/7030/7031/7040/7045/7050/7060/
7070/PS70
Maintenance Manual Volume 2 (Available on request)
This manual describes the information that premise the service based on parts
replacement (parts list, block diagrams, schematic diagrams, board layouts, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.
Contents
The following is a summary of all the section for understanding the contents of this
manual.
Section 1 Installation
Describes the overview of the BKMA-7031, how to install the BKMA-7031 to the
MAV-70XGI, and the connector and cable information for peripheral equipment
connections, etc.
Section 2 Service Overview
Describes the function and factory setting of the switches and LEDs on the board
and the specifications of the BKMA-7031.
Appendix
Describes the parameters that are added when the BKMA-7031 is installed.

1-1 (E)
BKMA-7031
1-1. Overview
1-1-1. BKMA-7031
The BKMA-7031 MPEG Decoder with 8CH Audio Board inputs the playback data from the hard disk of
MAV-70XGI and decodes its data to the video/audio signals.
For video, the video signals are decoded with MPEG2 MP@ML or 4:2:2P@ML compressed video
format, and the two-channels SDI video signals output.
For audio, the audio signals are decoded into four-channels MPEG1 Layer 2 or four/eight channels Linear
PCM compressed audio format, and the SDI embedded audio signal, AES/EBU audio signal are output.
n
The software version V2.50 or higher of the MAV-70XGI should be installed before using the BKMA-
7031. If is not installed, upgrade the software version to version V2.50. For the procedure of upgrading,
contact your local Sony Sales Office/Service Center.
The BKMA-7031 consists of the following components.
.DEC-133 board (1)
.Slot label (1)
.Installation guide (1)
.Installation manual (1)
Section 1
Installation

1-2 (E) BKMA-7031
1-2. Board Installation
General information
.The BKMA-7031 can be inserted into any slot exept slot
No.6 of MAV-70XGI.
.Stick the slot label supplied with the BKMA-7031 onto
the connector panel after the board installation to prevent
the incorrect insertion when the board replacing.
.Do not open the slot to keep the air-cooled effect of
MAV-70XGI. Be sure to attach the blank panel to
vacant slot.
.It is not necessary to adjust after board installation/
replacement.
Procedures
1. Turn off the power switches A and B of the MAV-
70XGI.
2. Remove the two screws, and remove the blank panel
of any slot.
n
Keep the removed blank panel.
3. Insert the BKMA-7031 into the slot, and turn the board
levers in the direction of the arrow 1to connect the
board to the mother board securely.
1-2. Board Installation
MAV-70XGI (Rear side)
Slot No.6
Board lever Board lever
1
22
1
Install
Remove
BKMA-7031
MAV-70XGI
Blank panel
BVTT3 x6
BVTT3 x6

1-3 (E)
BKMA-7031
4. Secure the BKMA-7031 with the two screws securing
the blank panel.
5. Stick the slot label supplied with the BKMA-7031
onto the connector panel.
The label’s number is the same as the slot number
which the board has inserted.
n
When removing the BKMA-7031, turn the board levers in
the direction of the arrow 2, and pull out the board
toward you.
1-2. Board Installation
BKMA-7031
Slot label
BVTT3 x 6

1-4 (E) BKMA-7031
1-3. Functions of Connectors
1SERIAL V/A OUTPUT (serial digital video/audio output) 1, 2 connectors : BNC type
Provides the serial digital interface signal (SDI).
The same signals are provided from 1 and 2 connectors.
2AUDIO OUTPUT AES/EBU (serial digital audio output) 1/2, 3/4, 5/6, 7/8 connectors :
BNC type
Provides the serial digital audio signal (AES/EBU) CH-1/2, CH-3/4, CH-5/6 and CH-7/8.
1-4. Matching Connectors and Cables
When connecting cables to various connectors on the connector panel at the time of installing or servic-
ing, connect the following connectors/cable or their equivalent.
BKMA-7031 Matching Connector/Cable
Panel Indication Connector Connector/Cable Sony Part No.
SERIAL V/A OUTPUT 1, 2 BNC 75 Z, female BNC 75 Z, male 1-569-370-12
5C-2V coaxial cable*1_
AUDIO OUTPUT AES/EBU 1/2, 3/4, BNC 75 Z, female BNC 75 Z, male 1-569-370-12
5/6, 7/8 5C-2V coaxial cable*2_
*1 : 5C-2V coaxial cable (Max. 200 m) of Fujikura America Inc./Fujikura Europe Ltd. (FEL) or the equivalent.
*2 : 5C-2V coaxial cable (Max. 1000 m) of Fujikura America Inc./Fujikura Europe Ltd. (FEL) or the equivalent.
1-3. Functions of Connectors
1-4. Matching Connectors and Cables
BKMA-7031
SERIAL V/A OUTPUT AUDIO OUTPUT AES/EBU
12 1/23/45/6 7/8
DECODER
1 2