Sony SRW5800/2 User manual

HDCAM-SR Workflow Guide
Designed for creative professionals working in commercial and television post, Autodesk® solutions empower editors and
artists with high-performance, integrated creative toolsets built for finishing. Autodesk Flame® Premium and Autodesk Smoke®
for Mac OS® X software both support the same efficient workflow with Sony’s HDCAM-SR VTR - on both mono- or stereoscopic
3D projects - so artists can focus on doing what they do best: delivering impressive, high-quality content fast.
To capture material recorded at double-speed:
1. Ensure that the HDCAM-SR is connected to the AJA card using a dual-link.
2. Set the HDCAM-SR VTR to 422DBL.
3. From the Device Name box, select the HDCAM SR VTR.
4. From the Tape Type box, select 2x-DOUBLE.
5. Capture the clip.
Autodesk Media & Entertainment Creative Finishing Solutions:
Autodesk Smoke for Mac OS X, Autodesk Flame Premium
Supported Workflow
Double-speed transfer
1080/50p and 1080/60p
Stereoscopic 3D
DATA mode (DPX file transfer)
Applicable HDCAM-SR VTR
SRW-5800
SRW-5100
SRW-5800 with HKSR-5803HQ
SRW-5100 with HKSR-5103
SRW-5800 with HKSR-5804
Image courtesy of McRay Corporation

©2010 Sony Corporation. All rights reserved.
HDCAM-SR Workflow Guide
To capture material recorded on 3D (stereoscopic) tapes:
1. Ensure that the HDCAM-SR is connected to the AJA card using a dual-link.
2. Set the HDCAM-SR VTR to 422 3D.
3. From the Device Name box, select the HDCAM SR VTR.
4. From the Tape Type box, select 2x-STEREO.
5. Capture the clip.
6. In the applications, stereo material can be played back and displayed as:
• Left or right eye
• Anaglyph
• Interlaced (left and right eye)
• Dual Output (active and passive projector systems, Flame Premium only)
7. Stereo material can be output as:
• Right eye Dual stream (left and right eye with HDCAM SR only)
• Single stream (side-by-side, top/bottom, Flame Premium only)
• Anaglyph
• Interlaced
Contact
Autodesk
10 Duke Street
Montreal, QC H3C 2L7
Canada
Phone [phone]
Fax [phone]
Websites www.autodesk.com/smokeformac
www.autodesk.com/flamepremium
MK10800V1OHB10DEC ATD
Image courtesy of James Lima