Sota Magnetic Pulser User manual

© 1998-2021 SOTA Instruments Inc. Page 1 of 6|www.sota.com
The Magnetic Pulser
Model MPG2 Manual
CONTENTS
WELCOME TO SOTA..................................................................................................... 2
BEFORE USING ............................................................................................................... 2
LEARN MORE ................................................................................................................. 2
COMPLETE UNIT INCLUDES ..................................................................................... 2
DO NOT USE.................................................................................................................... 3
CAUTIONS ....................................................................................................................... 3
SUMMARY OF LIGHTS ................................................................................................. 4
HOW TO USE THE MAGNETIC PULSER. ................................................................. 4
How It Should Feel ..................................................................................................... 4
Typical Use................................................................................................................... 5
ELECTRICAL SPECIFICATIONS ................................................................................. 5
Power Requirements................................................................................................... 5
Optional Power Input................................................................................................. 5
Output Specications.................................................................................................. 6
REPLACEMENT ACCESSORIES.................................................................................. 6
WARRANTY .................................................................................................................... 6
REPAIRS............................................................................................................................ 6

© 1998-2021 SOTA Instruments Inc. Page 2 of 6|www.sota.com
The Magnetic Pulser Model MPG2 Manual
WELCOME TO SOTA
Thank you for allowing us to be a part of your Wellness Team.
The Magnetic Pulser is a consumer product designed to be used as part of a Wellness
Lifestyle. A commitment to healthy lifestyle choices is an important factor in the
journey to Wellness.
The SOTA Magnetic Pulser generates pulsed magnetic elds which create
microcurrents of electricity that work with the body’s natural electricity for general
health and well-being.
The Magnetic Pulser is designed to be used independently, but can also be used
together with any of the SOTA Products.
With proper care, your Magnetic Pulser should provide you many years of trouble-free
use.
Please understand that results will vary.
BEFORE USING
Please read the manual thoroughly before using your Magnetic Pulser.
We have made every effort to ensure the information in your manual is up-to-date at
the time of printing ... since that time however, new information may have become
available. For the most up-to-date manual, please visit our website www.sota.com/
manuals.
LEARN MORE
To learn more about the Magnetic Pulser we
invite you to visit the SOTA website:
www.sota.com
The website offers How to Videos, Frequently
Asked Questions, The SOTA Products User
Guide, SOTA News ... and more.
COMPLETE UNIT INCLUDES
• One (1) Magnetic Pulser Unit
• One (1) Wall Adaptor
• One (1) Product Manual

© 1998-2021 SOTA Instruments Inc. Page 3 of 6|www.sota.com
The Magnetic Pulser Model MPG2 Manual
DO NOT USE
1.Do not use with a pacemaker. With the permission of your physician, it may be safe
to use below the waist.
2.Do not use in the following situations as safety has not been explored:
a. In the case of pregnancy.
b. In the area of an implanted device such as a shunt, etc.
c. In the area of external or internal bleeding wounds, including menstruation.
d.In the area of a metal implant. The metals may absorb heat and could cause
discomfort or a burn. Metal dental llings are rarely affected.
3.As with all electrical products do not use near water, when driving a car or when
operating heavy equipment.
CAUTIONS
1.If you experience nerve pain or an increase in nerve pain while using the unit, please
discontinue using in the area of pain.
2.Caution is advised when using heat-producing or heat-sensitive ointments, lotions or
medications as a skin burn may occur.
3.When in use, please ensure there is proper airow around the Encased Coil. With
normal use, the Encased Coil will become very warm to hot. If it feels uncomfortable,
turn the unit OFF and allow it to cool before resuming use to prevent a skin burn.
4.To prevent damage or loss of information, keep away from homeopathic remedies,
credit cards, security cards, audio and video tapes. Also from electronic equipment—
computer disks, hearing aids, cell phones, answering machines and others.
5.Always operate with the unit on a hard, at surface so the vent holes are not
impeded.
6.While this technology is generally considered safe, there exists potential for rare
individual reactions that cannot reasonably be foreseen. Therefore, your use of
the SOTA Products constitutes your agreement that you are responsible for your
decision to use the technology and that you hold SOTA harmless for any injuries or
damage believed to arise from using the SOTA Products.

© 1998-2021 SOTA Instruments Inc. Page 4 of 6|www.sota.com
The Magnetic Pulser Model MPG2 Manual
SUMMARY OF LIGHTS
GREEN: Indicates the unit is ON, the pulse is building and the pulse is released.
RED: Indicates the cycle is completed.
HOW TO USE THE MAGNETIC PULSER
1.Insert the power plug from the AC-DC Wall Adaptor into the unit and plug the
adaptor into an electrical outlet.
2.Move the toggle switch to the ON position.
The GREEN lights come on
sequentially indicating the
pulse is building. When the last
GREEN light is lit, the Pulsed
Magnetic Field is released from
the Encased Coil. A click may or
may not be heard as the pulse is
released.
3.The Encased Coil should be located on or as close to the body as possible. It does not
need to touch the skin as clothing will not interfere with the magnetic eld.
Note: The Pulsed Magnetic Field penetrates up to nine inches.
4.When a cycle nishes (approx. 5 minutes), the RED light will come on. Turn the unit
OFF by moving the toggle switch to the OFF position. To continue with another
cycle, turn the unit on again.
5.To turn the unit OFF before the end of a cycle, move the toggle switch to the OFF
position.
6.Unplug the Wall Adaptor when not in use.
HOW IT SHOULD FEEL
Most individuals will not feel any sensation while using the Magnetic Pulser.
With normal use, the Encased Coil will become very warm to hot. If it feels
uncomfortable, turn the unit OFF and allow it to cool before continuing.
Another option is to place something between you and the Encased Coil, like a
single layer of towel or blanket, always ensuring there is proper airow around the
Encased Coil.

© 1998-2021 SOTA Instruments Inc. Page 5 of 6|www.sota.com
The Magnetic Pulser Model MPG2 Manual
TYPICAL USE
Length of Session: It is best to begin slowly (10 minutes) and then gradually increase
the length of each session. Daily use varies from 20 - 30 minutes to two hours or
more.
Length of Use: The SOTA Products
User Guide available at
www.sota.com/spug offers
suggestions for Focused, Basic and
Ongoing Wellness Plans.
When used as part of a Wellness
Protocol, daily use for many weeks
is more important for results than
using occasionally. For specic
purposes, longer and more
frequent sessions may be more
benecial. Generally, the Magnetic Pulser can be used as needed.
Placement: The Encased Coil may be kept on one location for one or more cycles. It
may also be moved at any time to a different location.
Drink plenty of water: It is important to drink enough water when using the unit.
Drinking ozonated water is especially helpful.
Stop Gradually: Reduce the amount of time each day for the last week of use. If
using more than one SOTA unit at a time, it is suggested to stop only one unit at a
time.
ELECTRICAL SPECIFICATIONS
Your Magnetic Pulser outputs a time-variant pulsed DC magnetic eld.
POWER REQUIREMENTS
12 Volts DC @ minimum 1.5 Amps, Tip or Center Positive.
Caution: Exceeding the voltage rating or reverse connection may result in injury or
unit failure. This will void the warranty.
OPTIONAL POWER INPUT
To operate the Magnetic Pulser from a 12 Volt DC source, such as an automobile

• The SOTA units are consumer products designed to be used as part of a Wellness Lifestyle • The SOTA units are not medical devices nor are they
intended to diagnose, treat or cure any medical or health condition • The use, safety or effectiveness of the SOTA units has not been approved by any
government agency • Please consult a health practitioner for any medical or health condition • Results using the SOTA Products will vary for each
person • Please note that all purchases of SOTA Products are deemed to be made in Penticton, BC, Canada •
© 1998-2021 SOTA Instruments Inc. Page 6 of 6 |www.sota.com
Designed, Engineered and Made in Canada.
The Magnetic Pulser Model MPG2 Manual
battery or an appropriate Solar Panel, purchase a Universal Power Cord with Tip or
Center Positive polarity.
OUTPUT SPECIFICATIONS
Magnetic Field Intensity: Greater than 6000 Gauss at face of the Encased Coil as
tested with an F.W.Bell 5080 Tesla Meter.
Pulse Duration: ~2.5 mS (milliseconds)
Pulses per Cycle: 64 pulses (approx. 5 minutes)
REPLACEMENT ACCESSORIES
To replace your accessories, please contact your supplier.
WARRANTY
The Magnetic Pulser Model MPG2 is covered by a two (2) year limited warranty.
Please keep proof of purchase. Warranty is void if the failure is due to abuse or
negligence. SOTA reserves the right to make changes to the Magnetic Pulser without
obligation.
REPAIRS
Please contact your supplier for return instructions. For information about your closest
repair depot, contact [email protected] or call 1.250.770.2023 or 1.800.224.0242 (toll-free
in Canada & USA).