Sound Sation MHL-10W-36-RGBW User manual

Product Instruction
MHL-10W-36-RGBW
36*10W (four in one) (fancy effect)
LED Moving Head Light

Product Profile:
Power supply: 110-230V AC 50/60Hz
Power consumption: 350W
Light source: 36 pieces 10W LED
DMX control channel: 27
DMX 512 connection: 3-pin XLR
Flash-rate: 25Hz
Maximum PAN-movement 630°: In 2.5s
Maximum TILT-movement265°: In 1.5s
Number of LED: 36
Beam angle: approx. 40°
Dimensions: 33*22*45 cm
Weight: 9 kg
DMX Values and Functions
CH1
Pan
0—255
0-540 degrees
CH2
Tilt
0—255
0-280 degrees
CH3
Dimmer
0－255
Dimmer
CH4
Strobe
0 –6
7 –65
66 –69
70 –128
129 –132
133 –191
192 –195
196 –255
No Function
Strobe1 Slow to Fast
No Function
Strobe2 Slow to Fast
No Function
Strobe3 Slow to Fast
No Function
Random
CH5
Red
0—255
Red 0％-100％
CH6
Green
0—255
Green 0％-100％
CH7
Blue
0—255
Blue 0％-100％
CH8
White
0—255
White 0％-100％
CH9
Red 1
0—255
Red 0％-100％
CH10
Green 1
0—255
Green 0％-100％
CH11
Blue 1
0—255
Blue 0％-100％
CH12
White 1
0—255
White 0％-100％
CH13
Red 2
0—255
Red 0％-100％
CH14
Green 2
0—255
Green 0％-100％
CH15
Blue 2
0—255
Blue 0％-100％

CH16
White 2
0—255
White 0％-100％
CH17
Red 3
0—255
Red 0％-100％
CH18
Green 3
0—255
Green 0％-100％
CH19
Blue 3
0—255
Blue 0％-100％
CH20
White 3
0—255
White 0％-100％
CH21
Pan/Tilt speed
0—255
Pan/Tilt speed
CH22
Manual RGB mixing colors
0—255
Mixing colors
CH23
Pan fine
0—255
Pan fine
CH24
Tilt fine
0—255
Tilt fine
CH25
Auto function
0 –127
128 –255
No Function
Auto Run
CH26
Zoom
0—255
Zoom
CH27
Reset
0 –251
252 –255
No function
Renew factory state
Menu Operation Instructions:
One: Set DMX Address code:
1、Press “Menu button to Set DMX Address, to confirm by press “ENTER”
button.
2、Show Set DMX address DMX address: 001, correct by pressing
“UP&DOWN” button
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving
Two: Set built-in program:
1、Press “Menu” button to Set run program，to confirm by press “ENTER”
button.
2、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Three: Setting Reversed Pan:
1、Press “Menu” button to Set Pan Reverse, confirm by press “ENTER” button.
2、Show Set Pan No/Yes, correcting by “UP&DOWN” Button
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Four: Setting Reversed Tilt:
1、Press “Menu” button to Set Tilt Reverse, confirm by press “ENTER” button.
2、Show Set Pan No/Yes, correcting by “UP&DOWN” Button

3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Five: Setting Balance：
1、Press “Menu” button to Set Balance，confirm by press “ENTER” button.
2、Show Adjust red Value: 255 correct by pressing “UP&DOWN” button.
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
4、Press” MENU” button to quit balance setting
Six: Setting DMX Channel:
1、Press “Menu” button to Set Run Channel，confirm by press “ENTER” button.
2、Show DMX Channel 12CH，Correct by pressing “UP&DOWN” button.
Seven: Setting Master-slave Mode
1、Press “Menu”button to Set Mast Mode，confirm by press “ENTER”button
2、Show Run Slave，correct by pressing “UP&DOWN”button. Mast mean Master
machine, Slave mean slave machine Mast OFF mean master-slave off
3、Press, “ENTER” button to save and quit. Press “MENU”button to quit no saving
Eight: Setting LCD light:
1、Press “Menu” button to set LCD Light, confirm by press “ENTER” button.
2、Show Light ON/OFF, correct by pressing “UP&DOWN” button.
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Nine: Checking software version:
1、Press “Menu” button to Display Ver.，confirm by press “ENTER” button.
2、Show software version
3、Press “MENU” to quit
Ten: Setting SoundActivation ON/OFF:
1、Press “Menu” button to set sound active mode, Confirm by press
“ENTER” button.
2、Show sound active ON/OFF, correct by pressing “UP&DOWN” button.
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Eleven: Run Manuel Mode:

1、Press “Menu” button to Run manual mode，Confirm by press “ENTER” button.
2、Show Run manual Adjust Red，Press “UP&DWON” button to choose the wanted
channel, Red，Green，Blue，PAN，TILT，to enter by pressing “ENTER” Button.
3、Press “UP&DWON” button to correct, Press” ENTER” Button to save or quit the
above menu.
4、Press” ENTER” Button to quit manual mode.