Sound Storm SSV10.4F User manual

On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
work surface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitor controls and features
6 Remote control
6Remote control battery replacement
7System wiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on the dome lights
11 Troubleshooting
12 Specifications
Congratulations on yourpurchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thankyou for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)
L A B O R A T O R I E S
®

On a towel or soft cloth, gently place the monitor assembly “face down” ona stable
work surface.
Using the wires provided, complete the audio, videoand powerconnections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
Please read this manual completely
and carefully prior to attempting to
install your new Sound Stormmobile
video equipment. Installed correctly,
your Sound Storm equipment will
provide you with years of enjoyable
and safe usage.
Installation of this equipment in any
portion of a vehicle which impairs or
distracts the driver is improper and
dangerous. Sound Storm assumes
no liability whatsoever for failure to
follow the proper installation of this
product.
Please keep this manual in a safe place
for future reference.
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
SHOCK HAZARD! Do not open the case
of thisproduct.There are dangerous
voltages present within the unit. Thereare
no user-serviceable parts within the unit.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
Operating precautions
Turn the unit off when it is not in use.
Avoid dropping any metal objects or
inflammable items into the monitor
ventilation slots.
Do not place objects on or suspend
objects from the power cord, as this
may damage the cord.
Installation precautions
Choose a mounting location in your
vehicle where the unit will not distract
or otherwise interfere with the driver’s
ability to control the vehicle.
Do not install components in areas
which are susceptible to rain, moisture,
direct sunlight,extreme heat or cold,
excessive dust, dirt or humidity.
If installation requires drilling holes or
othermodifications to the vehicle,
consult with your nearest dealer or
professional car audio installer.
Use only the installation parts and
hardware provided with the unit to
ensure proper installation. Usingother
parts can cause malfunction and
possible damage to your Sound Storm
video monitor.
Use only a power source with 12Volts
DC (negative ground).
Before final installation, temporarily
connect the wiring according to the
diagram near the end of this manual,
check it to ensure that it has been
connected properly, and test the unit
to make sure it is working correctly.
Afterthe monitor is installed, do not
arbitrarily pull it down or strike it. This
may loosen the mounting screws and
cause it to fall down.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
Your new video monitor features the
following:
• TFT Active Matrix LCD display
• Overhead console mounting
bracket
• On-screen menu system
• Audio/video input controls
• Built-in dome lights
• Wireless remote control
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2" machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
REMOTE IR SENSOR
4
UP/DOWN BUTTONS
These buttons are used to increase
or decrease parameters in the on-
screen display menu system.
3
MENU
This buttonenables the on-screen
display menu system. Once enabled,
this buttonis used as an ENTER
button.
2
SYMPTOM CAUSE REMEDY
1POWER ON/OFF
This button turns the monitor system
on and off. 5A/V SOURCE SELECTOR
Use this buttonto switch between
A/V Source 1 and A/V Source 2.
6TIME
This monitor shuts off automatically
after a certain period of non-use. Use
the time button to change the length
of time required before auto shut-off.
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK
3
POWER MENU + – AV SELECT TIME
REMOTE
1 2 5 6
4
VIDEO INPUT 2
(WHITE)

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
Release button
Battery
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2" machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
Theremote battery is held in a small “drawer” on
one edge of the remote. To open this drawer, press
and hold the small button on the edge of this drawer
(as shown below) and slide the drawer out.
Insert a new battery and push the drawerback fully
into the remote.
Changing the battery in the remote control
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
POWER
Press to turn unit ON or OFF.
1
SYMPTOM CAUSE REMEDY
VIDEO SOURCE SELECT
Pressing this button will switch the
monitor to the other video input source.
2
BRIGHTNESS UP/DOWN
Use these buttons to decrease or
increase the brightness of the
displayed image.
5
COLOR ADJUSTMENT
Use these buttons to adjust the color
of the displayed image.
6
CONTRAST ADJUSTMENT
Use these buttons to decrease or
increase the contrast of the displayed
image.
7
5
6
7
1
3
4
2
3TIMER
This monitor shuts off automatically
after a certain period of non-use. Use
the time button to change the length
of time required before auto shut-off.
4PRESET PICTURE
This button returns the monitor to its
factory settings forbrightness, color
and contrast.
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)
select
L A B O R A T O R I E S
®
A/V
color
timer
power
preset
picture
!

On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
work surface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
System wiring
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BROWN
BLACK
BLUE
to Door Control Line
to +12 VDC Battery
to Chassis Ground
BLACK VIDEO INPUT 2
(WHITE)
12V
Battery

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
Monitor installation
INSTALLATION TIP
Make a MOUNTING BRACKET out of wood. This bracket mounts under the headliner,
and provides a mounting surface to which the housing of the flip-down monitor can
be attached.
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealeror service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
If you have any doubts about this type of installation, please consult
your local mobile electronics retailer. Making holes in the roof of
your vehicle will cause damage which is expensive to repair.
CAUTION: Make sure the
screws are NOT long enough
to go through the roof!
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)
silver finish
threaded machine
screws

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
Releasing and lowering the monitor
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)
Pull the monitor screen
down to the desired angle

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn themonitor on, press andhold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
Powering up the monitor
Turning on the dome lights
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2"machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2" machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
No picture or
sound.
Power cord is not
properly connected.
A/V input cables not
properly connected.
A/V input source is not
operating properly.
Check that power connections
are properly made and all fuses
are in functioning condition.
Check all cables.
Replace or repair A/V source
(DVD player, video game, etc.)
No picture. A/V signal not present.
Contrast and/or
brightness is set
improperly.
TV reception is poor
(applies to system with TV
tuner only)
Check all cables. If necessary,
repair or replace A/V source.
Adjust contrast and brightness
levels to see if picture appears.
Check and adjust antenna
system. Move to another area
with better reception, if
possible.
Remote control
does not function
properly.
Battery is dead.
Remote is not being used
in direct line-of-sight with
the player or remote IR
sensor. Transmission is
best within 6 feet/35º
angle of IR sensor on the
monitor.
Replace battery.
Be sure when being used, the
remote is being pointed directly
toward the player or remote IR
sensor (if installed).
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)

On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This unit features dual dome lights, which turn on when you open a door. To turn
the dome lights on or off manually, simply press the round button near the right
dome light.
VIDEO SOURCE 1
(DVD player,
video game, etc.)
VIDEO SOURCE 2
(DVD player,
video game, etc.)
RED
BLACK
to Chassis Ground
DOME LIGHTS
CONTENTS
SSV10.4F User’s Manual - Contents
U S E R ’ S M A N U A L
SSV10.4F User’s Manual - page 7
SSV10.4F User’s Manual - page 8
SSV10.4F User’s Manual User’s Manual - page 2
General precautions
Safety precautions
SSV10.4F User’s Manual User’s Manual - page 3
SSV10.4F User’s Manual - page 4
Features What is included? Monitor Controls and Features
SSV10.4F User’s Manual - page 5
SSV10.4F User’s Manual- page 6
Troubleshooting
SSV10.4F User’s Manual - page 11
Specifications
SSV10.4F User’s Manual - page 12
Remote Control
SSV10.4F User’s Manual - page 9 SSV10.4F User’s Manual - page 10
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA video cable
• Video/power interface cable
with inline fuse
• Metal mounting plate
• (4) silver 1/2" machine screws
(for attaching monitor to mounting plate)
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
2General precautions
2Safety precautions
3Installation precautions
3Operation precautions
4Features
4What is included?
5Monitorcontrols and features
6 Remote control
6Remote control battery replacement
7Systemwiring
8Monitor installation
9Releasing and opening the monitor
10 Powering up the monitor
10 Turning on thedome lights
11 Troubleshooting
12 Specifications
Congratulations on your purchase
of a Sound Storm Video Monitor.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of viewing
pleasure.
Thank you for making Sound Storm
your choice in car video entertainment!
page
SSV10.4F
10.4" Flip Down TFT Monitor
A/V SYSTEM
Screen size
Video Compatibility
LCD panel type
Resolution, pixels
Brightness
GENERAL
Operating voltage
Dimensions(L x W x H)
10.4"
NTSC/PAL auto-compatible
Active Matrix TFT
1152 x 234
450 NITS
12V DC
12.5 x 11.4"x 1.5"
SSV10.4F
10.4" Flip Down
TFT Monitor
All specifications subject to change without notice.
MODEL
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
Push the monitor
release button forward
VIDEO INPUT 1
(YELLOW)
FUSE
BLACK VIDEO INPUT 2
(WHITE)
L A B O R A T O R I E S
®