Soundcore Sleep A10 User manual

soundcore Sleep A10
USER MANUAL

EN 01
Download the soundcore app to customize controls, listen to
soothing sounds, manage your sleep, update firmware, and
explore more.
If your earbuds cannot connect with the soundcore app, update it
to the latest version in your mobile app store.
soundcore
Choose the ear tips and ear wings that fit your ears best.
Twist the earbuds until the ear wings are wedged against the ridge
of your ears.
1 2
M
XS S L MS L
3
1. Place the earbuds in the charging case and close it.
• Fully dry off the earbuds and the USB charging port before charging.
2. Connect the charging case to the power supply by using an original or
certified USB-C charging cable.
• It is recommended that you charge the earbuds with a 5V charger (not
included).
•
Fully charge both the earbuds and the charging case before the first use.
10mins=2hr (sleep mode)
10mins=1.5hr (music mode)
2hr
< 30%
30% - 70%
>70%
100%
2
1
10mins=2hr (sleep mode)
10mins=1.5hr (music mode)
2hr
< 30%
30% - 70%
>70%
100%
2
1
1 2
< 5%5s
5s
5s
5s
5% - 30%
30% - 70%
>70%
PAIRING
CONNECTED 1s
soundcore
Sleep A10
soundcore
Sleep A10
Pairing with another device: Place the earbuds in the charging case and
leave the case open. Press and hold the button on the case for 3 seconds to
enter pairing mode.
1 2
PAIRING
CONNECTED 1s
soundcore
Sleep A10
soundcore
Sleep A10
3s
Open the charging case, the earbuds will automatically power on
and enter pairing mode.
Select "soundcore Sleep A10" on your device's Bluetooth list to
connect.
WEARING
POWERING ON & PAIRING RE-PAIRING
APP
CHARGING

EN 02
• Music Mode: Play soothing sounds from soundcore app, or connect
to your favorite apps for more audio content.
• Sleep Mode: Listen to the soothing sounds downloaded onto your
earbuds without having to interact with apps.
Sleep A10 adopts noise masking instead of noise cancelling. Noise
masking covers up noise with selected sounds, while noise cancelling
offsets noise using sound waves.
You can enable Adaptive Noise Masking to adjust volume
automatically depending on the noise levels. This feature is only
available in Sleep Mode.
1
2
1
2
• Sleep Monitoring: The earbuds can monitor your sleep and
provide a sleep quality report.
• Smart Switch: Enable this feature to automatically switch to Sleep
Mode when you fall asleep.
You can switch between Music Mode and Sleep Mode via the soundcore
app or by tapping the left earbud twice.
Sleep Mode
Music Mode
SELECTING LISTENING MODE
ADAPTIVE NOISE MASKING
CONTROLS
SLEEP DETECTION
You can customize more controls in the soundcore app.
Phone call function is not supported on soundcore Sleep A10. Please
use your mobile phone to answer a call.
Switch listening modes
(Music Mode / Sleep Mode) Tap twice firmly (L)
Play / Pause Tap twice firmly (R)
×2R
×2L
Music Mode
Sleep Mode
L
R

EN 03
Reset if the earbuds have issues pairing with each other or with other
devices.
Delete the pairing history from your Bluetooth device first. Place the
earbuds in the charging case and leave the case open. Press and hold
the button on the charging case for 10 seconds until the LED indicators
rapidly flash white 3 times.
2
10s
1
×3
Flashing white rapidly
Flashing white slowly
Steady white
Light off
1
< 5%5s
5s
5s
5s
5% - 30%
30% - 70%
>70%
PAIRING
CONNECTED 1s
LED LIGHT GUIDE FIRMWARE UPDATE
RESET
To power off, place the earbuds in the charging case and close it.
The earbuds will automatically power off after 10 minutes if they are not
connected. The duration can be set in the soundcore app.
21
POWERING OFF
You will be informed once the new version of firmware is detected when
you connect the earbuds with the app. Ensure the earbuds are placed in
the charging case and the case remains open until the firmware update
is completed. During the update, ensure the earbuds are being charged
and avoid any usage.
Specifications are subject to change without notice.
Input 5V 0.5A
Rated output power 2.2mW
Battery capacity 25mAh x 2 (earbuds);
580mAh (charging case)
Charging time Up to 2 hours
Playtime (Music Mode) Up to 6 hours (Total 47 hours
with the charging case)
Playtime (Sleep Mode) Up to 10 hours (Total 80 hours
with the charging case)
Driver unit 5mm dynamic driver
Frequency response 20Hz - 20kHz
Impedance 16Ω
Waterproof level (earbuds) IPX4
Bluetooth version 5.2
Bluetooth range 10m / 33ft
SPECS