SOUNDMASTER WE-19 User manual

WE-19 10-Band Radio
Funktionstasten
1.
16.FM / UKW Taste
17.Aufsteller
18.Teleskopantenne
19.Lautstärke
20.Ohrhörerbuchse
21.Buchse für ext. Netzteil
22.Batteriefach
15.AM / MW Taste
2.
3.
4.
5.
6.
7.
8.
9.
LCD-
A
nzeige
Bandschalter AM/MW, SW/KW1-18
Beleuchtung Anzeige
Betriebsanzeige
Tuninganzeige
Trageschlaufe
Senderfrequenzeinstellung
Stunden Taste
Zeiteinstellung
10.Minuten
T
aste
11.Tonschalter hoch/tief
12.Ein/Aus Schalter
13.Countdown Taste
14.Alarm Taste

CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
8.
MHz (UKW/FM o
r
KW/SW 1-8)
KHz (MW/AM)
AL on symbol
Alarm set symbol
PM indicator
FM indicator
AM indicator
Time or radio frequency
Installing batteries / Safety
Insert 2 pcs 1,5V UM3/AA batteries in correct polarity into battery compartment (22).
Use only environment friendly batteries, which have 0% cadmium & 0% mercury.
Always change complete set of batteries and do not mix-up old with new once. By
longer non-using of radio, take batteries out of radio.
Never put batteries into fire. DANGER OF EXPLOSION !!
Never bring radio in touch with any water or other liquids.
Light fo
r
display
18.Telescopic antenna
19.Volume
20.Earphone jack
21.DC jack
22.Battery compartment
LCD-display
17.Rack
12.On/off switch
13.Alarm ON/OFF button
14.Alarm button
15.AM / MW button
16.FM / UKW button
9.
LCD-display
Band switch AM/MW, SW/KW1-18
Backlight LCD-display
Power LED
Tuning LED
Carry loop
Tuning
Hour button
Time set
10.Minute button
11.Sound switch high/low
Press button (3).

Radio
Connect DC-adapto
r
3V 300m
A
Cente
r
(-) to
j
ack (21)
Technique
UKW-FM
MW-AM
KW/SW1
KW/SW3
KW/SW5
KW/SW7
Battery use
DC adaptor us
87,5 – 108MHz
526 – 1600KHz
5,95-6,20MHz
9,50-9,90MHz
13,60-13,80MHz
17,50-17,90MHz
KW/SW2
KW/SW4
KW/SW6
KW/SW8
7,10-7,30MHz
11,65-12,05MHz
15,10-15,60MHz
21,45-21,85MHz
3V, 2 pcx 1,5V UM-3/AA
3V, 300mA, Center (-)
Changes of technical specifications without further notice
Copyright by Woerlein GmbH, D-90556 Cadolzburg, Germany
Activation alarm
1.
2.
3.
Turn on radio, select band and station and turn off radio.
Press (13) and alarm is activated. LCD-display is showing:
Radio will turn on to when setted alarm time is reached
Ton control
With switch (11) you can select sound high/low.
DC adapte
r
use (adapto
r
not incl.)
Alarm time set (radio OFF )
1.
2.
3.
4.
Press & hold ALARM DISP (14)
Set alarm time by HOUR (8) / MIN (10).
After alarm time set, release (14)
By pressing (14) alarm time can be always shown.
Set time by buttons HOUR (8) / MIN (10). Attention AM or PM !
After setting release button (9).
1.
2.
Switch (12) to Pos. ON , LED (4) lights up.
Extend rod antenna (18) for UKW-FM / KW-SW. For MW-FM whole unit must be turned due build-in
Ferrite antenna.
With button (16) select FM/UKW or switch (2) to Pos. MW/AM and press (15) AM/MW.
For SW/KW1-8 use select with switch (2).
Tune (7) and frequency will show in display (1).
Set volume (19) and tone by switch (11).
Radio off: switch(12) to pos. OFF.
3.
4.
5.
6.
Time set (radio OFF)
1. Press & hold TIME button (9).
2.
3.