Southern Enterprises EN810100TX User manual

1
EN810100TX
Aspen Floating Shelf 10" Chocolate
EN810200TX
Aspen Floating Shelf 10" Black
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Max loading weight:20lbs

2
8
MAX
20lbs
capacity
Suggested tools as below list
Pencil Power drill Level
Bit ¢3/16” Tape measure
111-100 CHICAGO FLOATING SHELF 10" BLACK
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A Quantity: 1
Shelf
B Quantity: 1
Bracket
C Quantity: 5
Plastic anchor: 6 x 30mm
D Quantity: 5
Screw: 8 x 35mm
E Quantity: 2
Screw: 8 x 22mm
F Quantity: 1
Level
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call customer service at 1-800-633-5096 for
assistance, questions, or parts.
Assembly Tool Required
(Not Included)
A
spen
F
loating
S
helf
10"

3
Figure 1
Place the Mounting Bracket (B)
against wall at desired location
with arrow pointing up.
Place level on top of bracket to
insure bracket is level. Mark
each hole with a pencil.
Remove bracket.
Tip: If mounting to sheet rock
(cavity wall) it is advisable to
mount at least one screw
(without anchor) directly to a
wall stud.
Figure 2
Using a power drill and 3/16”
drill bit, drill a hole through wall
at each marked location that is
not a stud location.
Then, insert Plastic Anchors (C)
into each hole and lightly tap
Anchors (C) with a hammer until
they are securely flush with face
of wall.
After the Plastic Anchors (C) are
securely in place, position
Bracket (B) to be mounted to
wall.
Using a Philips screwdriver,
drive Screws (D) into Plastic
Anchors (C) until Bracket (B) is
securely placed on wall.
Drive a Screw (D) into a stud if
applicable.
Aspen
F
loating
S
helf
10"
Assembly Instructions

4
Figure 3
Slide the Shelf (A) onto
Mounting Bracket (B) by
aligning the two holes on Shelf
(A) to poles on Bracket (B),
making sure the two small holes
are pointing down on bottom of
Shelf (A).
Figure 4
Insert two Long Screws (E) with
a screwdriver to secure Shelf
(A) to Bracket (B).
Place level on top to insure
product is level.
Now your shelf is ready to use.

5
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central Time if you have product issues or email us at [e-mail]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity
Needed
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form

6
CAUTION
Max shelf load capacity is achieved by mounting screw into studs or cement
walls
If mounting to sheet rock (cavity wall it is advisable to mount at least 1 screw
(without anchor directly to a wall stud or studs. However, do not leave either end of
mounting bracket unsupported by at least one anchor. For hollow wall mounting, you
can use any of the holes in the back plate to suit where you require the mounting
screws positioned.
Note: Pipe bracket has a built-in safety design feature Pipes have a slight
upward angle to prevent floating shelf from fogging when shelf is loaded
Weight ratings are E D L (evenly distributed load)