Spa Electrics R6 User manual

USE A SCREWDRIVER TO LOOSEN THE CAPTIVE SCREW
PULL THE LIGHT ASSEMBLY FORWARD AND UP SO
IT LIFTS OFF THE TAB AT BASE
LIGHT REMOVAL
PRODUCT SUPPORT & INFORMATION
For the most up to date installation information and contact information
for assistance in your region, please visit www.spaelectrics.com
COPYRIGHT 2020 SPA ELECTRICS PTY. LTD. ALL RIGHTS RESERVED US 20201116
www.spaelectrics.com
Toll Free: 1800 708 5545
Email: [e-mail]
WINTERIZATION
INSTRUCTIONS
1: DETACH THE LIGHT ASSEMBLY
2: PULL OUT LIGHT ASSEMBLY
UNSCREW PLUG COLLAR COUNTER-CLOCKWISE
UNTIL IT IS FREE SPINNING
DISCONNECT LIGHT ASSEMBLY FROM PLUG BY
PULLING APART
3: UNLOCK THE PLUG
4: DISCONNECT THE TERMINALS
• Flat-blade screw driver
TOOLS REQUIRED

PRODUCT SUPPORT & INFORMATION
For the most up to date installation information and contact information
for assistance in your region, please visit www.spaelectrics.com
COPYRIGHT 2020 SPA ELECTRICS PTY. LTD. ALL RIGHTS RESERVED US 20201116
www.spaelectrics.com
Toll Free: 1800 708 5545
Email: [e-mail]
WINTERIZATION
INSTRUCTIONS
WINTERIZATION COVER ATTACHMENT
PLACE WINTERIZATION COVER ONTO CLAMP RING AT 10 O’CLOCK AND TURN CLOCKWISE TO 12 O’CLOCK
TO LOCK INTO PLACE
ALIGN TERMINAL PINS ON PLUG WITH TERMINAL PINS ON BACK OF WINTERIZATION COVER AND
FIRMLY ASSEMBLE PLUG TO COVER
1: CONNECT WINTERIZATION CAP
2: COIL CABLE BACK INTO NICHE
3: LOCK ON WINTERIZATION CAP
1 2