Royal Exclusiv RE-Light Operating instructions

Operating- and maintenance manual
Royal Exclusiv®LED Lamp - RE-LIGHT
LED-Panel luminaire especially for seawater aquariums - modular -
ENG
v1.0
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
0
Operating- and maintenance manual Royal Exclusiv®LED Lamp - RE-LIGHT-
LED-Panel luminaire especially for seawater aquariums - modular -
0. Introduction ...................................1
1. Foreword ...................................1
1.1. Applications ...................................1
1.2. Before installation ...................................1
1.3. Use of the lamp ...................................2
2. General information ...................................3
2.1. Intended use ...................................3
2.2. Scope of delivery ...................................3
2.3. Safety ...................................3
3. Overview ...................................4
3.1. Controller ...................................4
3.2. Saving Settings ...................................4
3.3. Joystick ...................................4
3.4. Display ...................................4
3.5. Lamp temperature ...................................4
4. Installation ...................................4
4.1.Installation of the luminaire ...................................4
4.2.Commissioning of the luminaire ...................................5
5. Preview and Quick View (demo mode) ...................................5
6. Settings menu (light sets) ...................................7
6.1 Top-Level Menu Scheme ...................................7
6.2 Navigating the top adjustment level ...................................7
6.3 Menu schema level basic setting ...................................8
6.4 Setting the time and date ...................................8
6.5 Saver logo ...................................8
6.6 Menu scheme level lamp setting (Pre Sets - SPS / SPS-LPS / LPS) ...................................9
6.7 Intensity (own sets) ...................................9
6.8 Start Time ...................................9
6.9 End Time ...................................10
6.10 Duration Start ...................................11
6.11 Duration Ends ...................................11
6.12 Automatic moon ...................................11
6.13 Disable moonlight ...................................11
6.14 Simulation ...................................11
6.15 Presets ...................................11
7. Default setting ..................................12
8. Warranty ..................................12
9. Claims for defects and compensation, Disclaimer ..................................12
10-11. Manufacturer‘s declaration / Contact ..................................13
Please keep these instructions for use carefully! In case of change of ownership,
please pass on the complete instructions for use.
Do not connect the power supply to the mains until the LED cables are connected.
!!

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
1
0. Introduction
Dear customer, thank you very much for the trust
and the purchase of our Royal Exclusiv®LED
lamp RE-Light. During development, our special
focus was on illuminating the surface and evenly
and creating daylight that is as nature-identical
as possible. The animals thus receive a spect-
rum that comes close to their natural habitat. This
allows them to form and grow strong color pig-
ments. We have thought of the night owls among
the animals by means of a moonlight with integ-
rated moon phase calendar.
We wish you a lot of fun and joy with your lamp.
1. Foreword
1.1. Applications
The Royal Exclusiv®LED lamp RE-Light is sui-
table for illumination of freshwater and saltwater
aquariums, as well as for terrariums AquaSca-
ping, hydroponics and botany applications.
The lamp is always to be used for use in a „clean
environment“ indoor.
Ambient temperature : 0 °C bis max. +50 °C
Supply voltage : 100 - 240 V / 50/60Hz
1.2. Before installation
Attentions: Before installing the lamp, you must
read this guide carefully. Damage caused by non-
compliance with the instructions is not covered by
the warranty.
The lamp may only be operated with the beam
surface facing downwards and at least on the
supports (basin holder) or with a minimum height
of 10 cm above a base or water surface. The
LED lamp RE-Light must be stable and safe in-
stalled.
When unpacking the lamp, check that all parts
are complete and undamaged. Any damage
found must be reported to your supplier within
24 hours of purchase.
The lamp is tested before it leaves the factory.
Before packaging, the lamp was treated with a
biodegradable disinfectant to kill any bacteria
present.
Before you put the lamp into operation, the lamp
must be checked for damage. If the lamp is da-
maged, it must not be put into operation. Inform
your supplier immediately! In the event of com-
missioning despite external damage, any war-
ranty and liability claims are excluded.
Unplug the power outlet and make sure the lamp
cannot be turned on. During the entire installati-
on work, the lamp must not be connected to the
mains.
These instructions should inform you correctly
and completely, e.g. also about possible dangers
caused by this lamp. The user, installer or main-
tenance technician, is responsible for controlling
and following the instructions in this manual. The
Royal Exclusiv®LED lamp RE-Light is built
according to the current state of the art and the
existing safety regulations. Nevertheless, this de-
vice can pose a risk to persons and property if it
is used improperly or not in accordance with its
intended purpose or if the safety instructions are
not observed.
In the event of improper use, our liability and the
general operating permit shall expire. For safety
reasons, children and adolescents under the age
of 16 as well as persons who cannot recognize
possible dangers or who are not familiar with the-
se instructions for use are not allowed to use this
device!

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
Netzteil erst an das Stromnetz anschließen, wenn die LED Kabel angeschlossen sind.
! !
Please keep these instructions
for use carefully!
In case of change of ownership, please
pass on the complete instructions for use.
The combination of water and electricity can lead
to serious danger if not properly connected or
handled properly.
1.3. Use of the lamp
Compare the electrical data of the power supply
with the nameplate on the packaging or on the
device. Make sure that the device is protected
by a residual current protection device with a
rated residual current of up to 30 mA (DIN VDE
0100T739). Only operate the device from a pro-
perly installed power outlet.
Keep the power plug and all connection points
dry! Lay the connection cable protected so that
damage is excluded.
IT IS NOT ALLOWED TO USE THE PLUG
CUT OFF. IT EXPIRES IMMEDIATELY
ALL WARRANTY AND LIABILITY CLAIMS.
Use only cables, installations, adapters, extensi-
on or connection cables with safety contact that
are approved for use. (DIN VDE 0620 and with
sufcient cable diameter). Do not carry or pull
the device on the connection cable! If the cable
or housing is defective, the device must not be
operated! Protect the connector and accesso-
ry cables against heat, oil, UV light and sharp-
edged parts.
The manufacturer assumes no liability for dama-
ges in any form caused by improper use or neg-
ligence of the user / installer. Make sure that the
connector of the lamp never falls into the water
or gets damp. If the connector plug gets wet in
any way, it must be opened by an expert and
rinsed with demineralized water.
After that, it must be carefully dried.
Cables may not be altered or replaced. Electrical
installations must always comply with national
and international requirements, directives and
standards. Never open the housing of the device
or its associated parts, unless expressly stated in
the instructions for use or instructions by Royal
Exclusiv®. Never make technical changes to the
device.
Use only original spare parts and accessories.
Repairs can only be carried out by authorized
service centers.
(Exception: Extension / installation and remo-
val after consultation with RE Support)
If you have any questions or problems, contact
an electrician, your dealer or the manufacturer
Royal Exclusiv®directly for your own safety.
ATTENTION: First connect the power sup-
ply without power to the Royal Exclusiv
RE Light – Multi-pole rotary joint.
2

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
2. General information
2.1. Intended use
Our luminaires are mainly designed for illumina-
ting freshwater and saltwater aquariums, as well
as for terrariums aquascaping, hydroponics and
botany applications. The lamp bodies must be
installed at a minimum distance of 10 cm from
the water surface above the aquarium. The lumi-
naire itself must not come into contact with water.
2.2. Scope of delivery
- RE-Light luminaire with connection cable for
Power supply
- Multirange power supply with connection cabl
for Luminaire and to the mains
- Upstand or ceiling attachment
- Operating instructions
Please check the scope of delivery imme-
diately after unpacking your luminaire. Im-
portant: Important: Damaged luminaires or
components must not be put into operation
under any circumstances!
Our luminaires are equipped with the CE mark.
This can usually be found on the type plate.
2.3. Safety
Please note the following information onPlease note the following information on
operation:operation:
The luminaire must be mounted at a minimum
distance of 10 cm from the water surface.
Use our stand-up feet or our rope system.
The rope system must be checked at regular
intervals for possible corrosion.
The luminaire must not be operated without
a splash screen.
The luminaires are intended exclusively for
operation via aquariums inside the building.
They must not be operated under water.
During maintenance work, the luminaire
must be completely disconnected from the
electrical mains.
When working in the aquarium, it is recom-
mended to disconnect the lighting from the
mains for safety reasons.
During operation, the luminaire heats up, so
care must be taken to ensure that the coo-
ling surfaces of the luminaire remain free and
sufcient heat can be dissipated.
Please do not „do it yourself“ Repair att-
empts. Contact your dealer or call our ser-
vice hotline [phone].
We are happy to help you.
3
ATTENTION: Do not look at the light/beam
surface when switching on the lamp and
during operation!!!

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
3. Overview
3.1 Controller
The lamp controller of the Royal Exclusiv®RE-
Light is located on the side of the lamp and
can be operated directly. As soon as the lamp
is energized, an internal battery charges within
seconds. This prevents the date and time as
well as all settings from being lost in the event
of a power failure. The battery has a capacity of
about 2-3 days.
3.2 Saving Settings
Settings are saved and activated as soon as you
get to the start or overview view with the „Start“
button from the menu (see point 4).
3.3 Joystick
On the housing, the entire operation is carried
out via the built-in 5-point joystick
3.4 Display
3.5 Lamp temperature
The lamp temperature indicates the current tem-
perature of the lamp. Overheating of the lamp is
prevented by an automatic light intensity reduc-
tion from a lamp temperature of 60°C.
This prevents increased aging of the LEDs.
As a rule, the automated decrease in light inten-
sity is imperceptible to the human eye.
4. Installation
4.1 Installation of the luminaire
For the two suspensions, drill holes in the load-
bearing structure, e.g. ceiling, according to the
cable system.
Assembly equipment such as dowels, screws,
etc. must be chosen according to local condi-
tions. Let your specialist dealer advise you. Af-
ter successfully attaching the rope suspension,
the luminaire can be hung with the help of the
Y-mount.
Date
Current moon phase
Current intensity
Dark blue 1 + 2 channel
Blue Channel
Turquoise Channel
Time
Lamp temperature
Current intensity
White Channel
Red Channel
Violet Channel
4

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
4.2 Commissioning of the luminaire
Connect the power connector of the Royal Ex-
clusiv®LED lamp RE-Light to the power supply
(-without power-) and connect the controller to
the supplied cable with network connection.
Then check all connections again carefully!
You can now connect the power supply to the
mains via safety plug.
ATTENTION: When switching on or operating
the luminaire, do not look at the light/beam
surface!!!
There is a risk of delusion
Es besteht Gefahr der Verblendung
The controller will take about 2-10 seconds to
start and starts once with the appearance of the
Royal Exclusiv logo.
The LEDs will run at full power for a short time
during this initialization. Then they automatically
switch to factory settings or the previously saved
settings.
The power supply and the light get warm during
operation. Therefore, make sure that sufcient
heat dissipation is ensured.
5. Preview and Quick View (demo mode)
In order to obtain a rough setting of the desired
target spectrum or for demonstration purposes,
the lamp controller has a quick view of the 7 lamp
channels that can be mixed individually. Here,
the light intensity of the individual channels is ad-
justable between 0-100%.
Procedure
a.On the running controller (whether in display
standby or screensaver mode) where the cont-
roller is in the overview view, the joystick is initi-
ally moved in one direction.
b. Then a submenu opens where you can se-
lect a color channel by moving the joystick up or
down. By pressing the joystick you can now get
to the intensity setting.
c. In the respective selected channel, the inten-
sity can then be changed by the four directions
of movement of the joystick.
The intensity can now be changed live in this
program mode.
5
ATTENTION: First connect the power sup-
ply without power to the Royal Exclusiv
RE Light – Multi-pole rotary joint.

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
If you move the joystick to the right or left, the
intensity level changes in 10 percentage steps.
If you move the joystick up or down, the intensity
level changes in 1 percentage steps.
d. As soon as you have conrmed the res-
pective intensity by pressing the joystick, you get
back to the color channel selection list. Note: All
channels except the initially selected one in this
so-called demo mode now switch to the intensity
level 0%. Each channel can be adjusted, mixed
and conrmed, stored in the described way.
e. It is now possible to get from the color
channel selection list to the start screen to get
the intensities of the individual set channels as
an overall overview. To do this, navigate down
or up with the joystick until the navigation com-
mand „back“ appears. Enter then takes you to
the start screen:
f. You can now see on the start screen by
the exclamation marks (!) instead of the percent
sign (%) next to the color channels that you are
still in the so-called demo mode.
If there is now a desire to continue mixing the
color channels in this demo mode, the joystick
must be pressed back in one of the respective
directions as described under a. You can then
proceed as described under b. and c.
g. If you now wish to return to automatic
mode, this is done by pressing the joystic key
„Enter“. This takes you back to the basic settings
menu.
From there you navigate down to the menu item
„Start“ and conrm by pressing the joystick „En-
ter“ that you want to switch from demo mode
back to automatic mode.
6

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
6. Settings menu (light sets)
6.1 Top-Level Menu Scheme
6.2 Navigating the top adjustment level
With the „Enter“ button of the joystick you get to
the top adjustment level.
• By moving the joystick up or down, you
move through the individual points in the
menu.
• In the top level you move either to the basic
setting, lamp setting or to the info page of
the controller.
• By pressing the joystick again, you get to the
respective lower level as shown in the dia-
gram.
7

For more information, please visit: www.royal-exclusiv.de.
Simply enter the part number or name into the search box or email: [e-mail].
All information subject to change. We try our best, but printing errors reserved.
Royal Exclusiv
Since 1986
Royal Exclusiv Aquarien-Anlagenbau Christian Walter GmbH & Co. KG
Vorgebirgsstr. 28 // 50389 Wesseling // Germany
Fon +49(0)2236/88055-0 // Fax [phone]
[e-mail] // www.royal-exclusiv.de
6.3 Menu schema level basic setting
6.4 Setting the time and date
By default, set the date and time. The blinking
cursor shows which eld you are currently in.
With the joystick, the respective number is in-
creased or decreased upwards or downwards,
by moving the joystick to the left and to the right
you move the cursor to the next eld to be set.
6.5 Saver logo
It is possible to „activate“ or „deactivate“ the
screensaver. When disabled, the display turns
black after about 1 minute. In the menu screens-
aver the option „activate“ or „deactivate“ can be
selected. After conrming the respective eld by
pressing the joystick, you return to the overview
of the basic setting.
8