Spacetronik SPB-121 User manual

12
21
A(6PCS)
ST4.2*16MM M4X10MM
STEP1
STEP2
10kg
1
2
2
B
C
3
Item No.: SPB-121
Locking Under-Desk Drawer
Installation guide
B(4PCS) C(1PC)
Screwdriver
1. Drawer (1PC)
2. Retaining Plate (2PCS)
3. Key (2PCS)
Open the drawer and then take out retaining plates
Paper Box
Retaining Plate X2
Fix the Retaining Plates
Close the drawer and then rotate the key 90 degree
counterclockwise to lock the drawer.

STEP3
288
335
190
100
69
69
370
ST4.2*16MM
Install the Drawer onto Height Adjustable Desk
1. Mark punch position on the tabletop 2. Drill holes using pistol drill and
ensure the hole diameter no more
than 3mm
Desk
3. Twist screws
Caution! This step need the cooperation of two people: one hold the drawer,
the other mark punch positions and drill holes.
Specifications
CAUTION
This product contains some small parts, which if swallowed, there will be a risk of suffocation. Please keep these small parts away from children
● Make sure you have read the instructions before installation and fully understand how to install. If you do not understand any of the installation steps,
please contact a professional installer.
● When installing, please be sure to wear safety clothes and use matching tools. At least two people are needed to complete the installation. Not wearing
safety clothes may cause human damage, serious injury or death.
Note: this product is for indoor use only. It may cause product damage or personal injury if used outdoors.