Spacetronik SPR-122S User manual

+
x4
x1
x1 x1
A B C
D
Item No.：S PR-122S
Installation guide
Technical Data Table cover size:
>650mm
>600mm
Please do not exceed the
maximum WARNING bearing weight
WARNING
140-500mm
3~15kg
Loading range
Height adjustment range
3-15KG
Max
Max:
2KG
Accessory Package List
No. Spare part
No. Spare part
Spare part Spare part
No. No.
TOOLS
ASSEMBLY STEP 1
ASSEMBLY STEP 2
Attention
Please place the product properly
according to size of it, or it may
harm or cause damage.
Please take the packaging carton apart,
take out the product and place it one the table

Bundle the cables with Velcro
ASSEMBLY STEP 3
ASSEMBLY STEP 4
ASSEMBLY STEP 5
Based on the actual usage, press the
handle on one side, and adjust the
workstation to the proper height
Warning
Please do not put hands near the supporting
bars, as they change during adjusting and
may hurt you.
Please make sure all installed equipments
are on the table, and not sticking out of the
edge, or it may harm or cause damage.
Careful
Please put the devices onto the
top of the workstation.
Nylon ties
This surface is with glue,
helping to fix the cable
management on the table
Cable
Adhesive buckle helps to make the
cables tidy and clean. Please leave
enough length of cable for height
adjustment function, otherwise it
may cause unexpected lost.
Careful
Warning
Please do not put hands near the supporting bars, as
they change during adjusting and may hurt you.
Please make sure all installed equipments
are on the table, and not sticking out of
the edge, or it may harm or cause damage.
Please leave enough length of cable for
height adjustment function, otherwise it
may cause unexpected lost.
Attention
Attention
Please first adjust it to the highest,
then remove equipment to avoid
harm or damage.
Attention
Please move it by two persons, or
parts may collide and cause damage.
Attention