Spear & Jackson ZQ446 User manual

INSTRUCTION
Please keep this instruction for future reference.
The picture is for reference only. Please adhere to the original products.
【ELECTRIC PATIO HEATER】

This manual contains important safety information concerning the maintenance, use and
operation of this product. Failure to follow the instructions contained in this manual may result
in serious injury. If you are unable the contents of this manual, please bring it to the attention of
your supervisor. Do not operate this product unless you have read and understand the contents
of this manual.
IMPORTANT SAFETY MEASURES
When using any kind of electrical appliance, some basic safety precautions must always be followed,
including the following:
1) To avoid possible electric shocks, do not place the cable, plug or appliance in water or in
any other liquid. Do not insert screwdrivers or metallic items inside the appliance.
2) If the power cable is damaged, it must be replaced by the manufacturer, its service
technician or by someone else authorized by the manufacturer in order to avoid a hazard.
In the event of handing of appliances by non-authorized people, the guarantee will
immediately cease to be valid.
3) Do not use appliances if they are damaged.
4) To disconnect electrical appliances, wait until the engine stops and then unplug the cable
from the electric socket.
5) Do not leave appliances working unattended. Ensure that the engine has come to a
complete stop before dismantling appliances. Unplug appliance after each use.
6) This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved.
7) Do not dispose of this product as unclassified municipal rubbish. Due to the use of electrical
and electric parts, this product must be collected separately
8) CAUTION- Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
9) WARNING: In order to avoid overheating, do not cover the heater.
10) The heater is suitable for indoor and outdoor use, but please ensure that the plug remains
indoors at all times.
Notice
1) The power supplied to this unit must comply with electrical requirement on its label.
Damage or fire may result if the incorrect power used.
2) Do not use the heater in somewhere with flammable objects, gas, dust.
3) In order to avoid scalding, forbid to touch the heater when it works.

4) Forbid to put anything on product surface when it is working.
5) To avoid possible electric shocks, do not use this heater in the immediate surroundings of
a bath, a shower or a swimming pool.
6) In order to avoid fire, do not use the heater with automatic electrified sequencer, timer and
other devices.
7) Children of less than 3 years should be kept away unless continuously supervised. Children
shall not play with the appliance.
8) Children aged form 3 years and less than 8 years shall only switch on/off the appliance
provided that it has been placed or installed in its intended normal operating position and
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance or perform user maintenance.
9) Turn off all switches and unplug the heater if an emergency situation occurs.
10) Please contact with seller if it does not work properly. Do not try to repair the heater by
yourself.
11) Please contact the seller if you find other problems not covered in this operation manual.
12) Cleaning and user maintenance shall not be made by children with supervision.
SPECIFICATION
Parts Description Quantity
A Heater Head 1
B Pole 2
C Base 1
D Remote 1
E Wrench 1
F Tapping Screw 2
G Bolt 3
Model: ZQ446
Feature： Remote Control
Voltage: 220-240V~50Hz
Power: 0/900/1200/2100W
Weight: 14kg
Size: 58.5*210cm
A
B
C
E
D
F
G

INSTALLATION AND ASSEMBLY
1. Please check all the items against the parts list after opening the box. Only all the items are
complete, the installation could be followed.
2. Installation:
Operation
*Turn on the ON/OFF button first.
CLEANING AND MAINTENANCE
1. Always turn off and unplug the heater before cleaning.
2. To clean the heater, use a damp cloth and make sure to dry excess water once cleaned.
*ATTENTION Do not put the heater directly into any container with water in it.
IP55 Dust and Water Protection
To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and its
implementation in national laws, old electric tools have to be separated from other waste and disposed of in an
environment-friendly fashion, e.g. by taking to a recycling deport.
TROUBLE SHOOTING
1. If the heater does not emit heat after turning on, please check the power cord whether
plugged into electric socket properly.
2. In first use, it is normal if the heater appears small amount of smoke and some smell
because of protective-oil evaporation.
Imported by N Brown Group plc, Griffin House, 40 Lever Street, Manchester, M60 6ES, United Kingdom.
TOUCH FIRST SECOND THIRD FOURTH FIFTH
OUTCOME STANDBY 900W 1200W 2100W OFF
5
2 1 3
1. Using 3 bolt to tighten the base and Down-pole by wrench.
2. Place the decorative cap on the base.
3. Tighten up the Up-pole and Down-pole by hand.
4. Put the heater head as the illustration and fix it by 2 tapping screws.
5. Feed the power cord through all the poles and base and connect to
heater head. Secure the power cord to the weighted base.
4
ON/OFF BUTTON
TOUCH SWITCH
Press and Cycle by 900W-1200W-2100W