
1
User Manual
Introduction
TVIUTPPTP are video balun that can use a single cost-effective Ethernet cable to extend HD-TVI/ AHD/
HDCVI/ CVBS signal and power, with HD-TVI transmission distance of up to 656’ (200M)@5MP. The
equipped power plug can also provide power from a local power supply to a remote CCTV camera and the
pigtail design allows you to have an easier, faster connection experience. Also, the balun has built-in ESD,
EFT, and surge protection components, allowing the unit to have a longer lifespan.
Features
Resolution up to 5MP HD-TVI
Video transmission distance up to 820’ (250M) and power transmission distance up to 328’
(100M) over CAT5e (or greater) cable.
Built with DC jack for power transmission.
Male BNC to RJ45 connector with pigtail design.
Built-in ESD, EFT (impulse noise) and transient protection.
Installation View
We recommend using our 12VDC PSW5 power supply (sold separately) for most cameras. (Please
check your camera specs). If you are using DC24V as your remote power source, please use our
VID2412CONV power converter (AC to DC for regulated DC12V ) at camera side to send regulated
DC12V for camera use.
Transmission Distance
Video ONLY Transmission Distance
1080P 820’ (250M)
1080P 820’ (250M)
1080P 984’ (300M)
1312’ (400M)
The distance may be affected by the quality of cable, camera, or recorder. This installation should be made
by a qualified technician and should conform to all local codes.