Spirit Commercial CT800 User manual

CT800 TV BRACKET
INSTALLATION GUIDE

Spirit Fitness

2
Spirit Fitness
Thank you for your purchase of this TV bracket from Spirit Fitness. This bracket was manufactured
by one of the leading tness manufacturers in the world and is backed by one of the most
comprehensive warranties available. Through your dealer, Spirit Fitness will do all we can to make
your ownership experience as pleasant as possible for many years to come. If not purchased direct
from Spirit Fitness, the local dealership where you purchased this bracket is your administrator
for all Spirit Fitness warranty and service needs. Their responsibility is to provide you with the
technical knowledge and service personnel to make your experience more informed and any
difculties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number, and
the date of purchase below to make any future, needed contact easy. We appreciate your support
and we will always remember that you are the reason that we are in business. Please complete
and mail your registration card today.
Yours in Health,
Spirit Fitness
NAME OF DEALER______________________________________
DEALER PHONE #______________________________________
PURCHASE DATE______________________________________

3
www.spirittness.com
WARNING:
This product may contain a chemical known to the state of California to cause cancer, birth defects, or
other reproductive harm.

4
Spirit Fitness
CT800 TV BRACKET STEP ONE
• Insert both coaxial and power
cables into the upper hole of the
TV bracket tube.
• Leave 12” of the coaxial cable
and 4” of the power cable
protruding out of the top.
• Guide the two cables through the
hole at the bottom of the right-
hand TV bracket arm tube.
• All cables go through the hole in
the right console mast tube.

5
www.spirittness.com
CT800 TV BRACKET STEP TWO
• Attach the round tube onto the
upright tube by tightening two
3/8”X1” BOLTS (8), two 3/8”
SPLIT WASHERS (12), two 3/8”
FLAT WASHERS (15), one 3/8”X2”
BOLT (9) and one 3/8” CURVED
WASHER (17).
• Wrap around the front side of
the right console mast tube and
across to the front internal panel
below the motor cover.
• Attach the coaxial cable on the
front panel.
3
8
8
#15. 3/8”
Flat Washer
#8. 3/8” x 1”
Bolt
#9. 3/8” x 2”
Bolt
#12. 3/8”
Split Washer
#17. 3/8”
Curved Washer
HARDWARE

6
Spirit Fitness
CT800 TV BRACKET STEP THREE
• Exit of coaxial cable.
• Attach both black and white
power wires on the board next
to the corresponding color of the
treadmill power wires.
• Screw in the ground wire.
Ground
Black White
• Attach the MOUNTING BRACKET
(4) with two FLAT WASHERS (14),
two SPLIT WASHERS (11), and two
BUTTON HEAD BOLTS (7).Tighten
securely with an M5 Allen Wrench.
#7. 5/16” x 15mm
Bolt
#14. M8
Flat Washer
#11. 5/16”
Split Washer
HARDWARE

800.258.4555
spiritservice@spirittness.com
www.spirittness.com
Spirit Fitness
3000 Nestle Road
Jonesboro, AR 72401
CT800 TV Bracket
Installation Guide
© 2018 All Rights Reserved
Revision: 02.27.2018