Spirit XE395 Elliptical User manual

1
XE395
Elliptical
OWNER’S MANUAL
Please carefully read this entire manual before operating your new elliptical
SPT0043

1
TABLE OF CONTENTS
Important Safety Instructions 3
Important Electrical Instructions 4
Grounding Instructions 4
Important Operation Instructions 5
Assembly Instructions 6
Features 15
Console Operation 17
Programmable Features 20
Using Heart Rate Transmitter 27
General Maintenance 29
Exploded View Diagram/Parts List 30
Manufacturer’s Limited Warranty 36

2
Congratulations on your new elliptical and welcome to the Spirit family!
Thank you for your purchase of this quality elliptical trainer from Spirit Manufacturing, Inc.
Your new elliptical was manufactured by one of the leading fitness manufacturers in the
world and is backed by one of the most comprehensive warranties available. Through your
dealer, Spirit will do all we can to make your ownership experience as pleasant as possible
for many years to come. If not purchased direct from Spirit, the local dealership where you
purchased this elliptical is your administrator for all Spirit warranty and service needs. Their
responsibility is to provide you with the technical knowledge and service personnel to make
your experience more informed and any difficulties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number,
and the date of purchase below to make any future, needed contact easy. We appreciate
your support and we will always remember that you are the reason that we are in business.
Please complete and mail your registration card today and enjoy your new elliptical trainer.
Yours in Health,
BOYLES FITNESS Equipment Pty Ltd.
Name of Dealer______________________________________
Purchase Date_______________________________________
XE395 / SPT0043 _ver. A (2011)

3
IMPORTANT SAFETY INSTRUCTIONS
W ARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your Spirit elliptical from the
electrical outlet prior to cleaning and/or service work.
W ARNING - To reduce the risk of bur ns, fir e, electric shock, or injury to persons, install
the elliptical on a flat level surface with access to a 230-volt, 10-amp grounded outlet
with only the elliptical plugged into the cir
cuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14A WG OR BETTER,
WITH ONL Y ONE OUTLET ON THE END:
 Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet
and elliptical may result.
 Keep children away from the elliptical. There are obvious pinch points and other caution
areas that can cause harm.
 Keep hands away from all moving parts.
 Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working
properly, call your dealer.
 Keep the cord away from heated surfaces.
 Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
 Never drop or insert any object into any openings.
 Do not use outdoors.
 To disconnect, turn all controls to the off position, then remove the plug from the outlet.
 Do not attempt to use your elliptical for any purpose other than for the purpose it is
intended.
 The hand pulse sensors are not medical devices. Their purpose is to provide you
with an approximate measurement in relation to your target heart rate. Use of a chest
transmitter strap is a much more accurate method of heart rate analysis . Various
factors, including the user’s movement, may affect the accuracy of heart rate readings.
 The pulse sensors are intended only as exercise aids in determining heart rate trends in
general.
 Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for
use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.
SAVE THESE INSTRUCTIONS - THINK SAFETY!

4
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten
percent (10%) or more, the performance of your elliptical may be affected. Such
conditions are not covered under your warranty. If you suspect the voltage is low , contact
your local power company or a licensed electrician for proper testing.
NEVER expose this elliptical to rain or moistur e. This pr oduct is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The operating
temperature specification is 40 to 120 degr ees Fahr enheit, and humidity is 95%
non-condensing (no water drops forming on surfaces).
GROUNDING INSTRUCTIONS
This pr oduct must be gr ounded. If the elliptical should malfunction or breakdown,
grounding provides a path of least resistance for electric current, reducing the risk of
electric shock. This product is equipped with a cord having an equipment-grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER - I mp r op e r c onn e c t i on o f t h e e qu i pm e n t - g r ound i ng c ondu c t o r c a n r e s u l t i n a
r i s k o f e l e c t r i c s ho c k . C h e c k w i t h a qu a li fi e d e l e c t r i c i a n o r s e r v i c e m a n i f you a r e i n
doub t a s t o w h e t h e r t h e p r odu c t i s p r op e r l y g r ound e d . D o no t mod i f y t h e p l ug p r o v i d e d
w i t h t h e p r odu c t i f i t w ill no t fi t t h e ou t l e t ; h a v e a p r op e r ou t l e t i n s t a ll e d by a qu a li fi e d
e
l e c t r i c i a n .
This product is for use on a nominal 230-volt circuit, and has a grounding plug that looks
like the plug illustrated below. A temporary adapter that looks like the adapter illustrated
below may be used to connect this plug to a 2-pole receptacle as shown below if a
pr operly grounded outlet is not available. The temporary adapter should be used only
until a properly grounded outlet, (shown below) can be installed by a qualified electrician.
The gr een colored rigid ear-lug, or the like, extending from the adapter, must be
connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.