SportDOG NoBark 10R User manual

Please read this entire guide before beginning
Operating Guide
Please read this entire guide before beginning

2 1-800-732-0144
Thank you for choosing SportDOG Brand
™
. Used properly,
this product will help you train your dog efficiently and safely.
To ensure your satisfaction, please review this operating guide
thoroughly. If you have questions regarding this product’s
operation contact our Customer Care Center at 1-800-732-0144,
or visit our website at www.sportdog.com.
Please register your product within 90 days at www.sportdog.com.
By registering, you will enjoy the product’s full warranty and should
you ever need to call the Customer Care Center, we will be able to
help you faster. Additionally, you will not have to save your product
receipt as registering serves as proof of purchase. Most importantly,
SportDOG
™
will never give or sell your valuable information to
anyone.
_________________________________
Table of Contents
Components......................................................................3
How the SportDOG™NoBark 10R Works ..........................3
Key Definitions..................................................................5
Charging ...........................................................................6
Modes of Operation...........................................................7
To Fit the NoBark 10R ....................................................10
What to Expect During Use of the NoBark 10R ...............12
Regular Maintenance .......................................................13
Accessories ......................................................................13
Frequently Asked Questions.............................................14
Troubleshooting...............................................................16
Service.............................................................................17
Terms of Use and Limitation of Liability ..........................17

www.sportdog.com 3
How the SportDOG™NoBark 10R Works
The SportDOG NoBark 10R Collar uses several features designed
to shorten the training phase and promote good behavior:
• A patented sensor system provides the most reliable bark
detection available.The unit delivers a static correction via
the contact points only if it detects BOTH vibration from the
vocal cords AND the sound of the bark.
• Three user-selectable modes allow you to choose how
corrections are delivered:
1.The patent pending Temperament Learning (indicated by
green light, see mode chart for example on page 7) mode tracks
the number of corrections needed to substantially reduce (and in
most cases eliminate) the number of nuisance barks.The system
provides 10 levels of static correction. It begins with a low-level
correction (Level 0). However, if excessive barking continues, the
correction intensity will increase with each successive bark until
the barking stops.This correction level becomes the starting level
the next time the dog barks. Once the dog has learned to reduce
the barking, the initial warning corrections are reduced.
Components

4 1-800-732-0144
2. In Progressive Correction mode (indicated by blue/green
light, see mode chart for example on page 7), the correction
starts at the lowest level and progresses to the next level (to
a maximum of Level 9) each time your dog barks within
30 seconds of the previous bark. If your dog does not bark
again within 30 seconds, the correction will be reset to the
lowest level (Level 0).
3. In the User-Selected Correction mode (indicated by
blue light, see mode chart for example on page 7), the user
presets the correction level (0-9) that will be used every
time the dog barks.
Note:As a built-in safety feature, if your dog barks 15 times or more
within a 80 second period, the NoBark 10R will automatically shut
off for 3 minutes.This safety feature is active in all three modes of
operation.
Important:
• DO NOT attach a leash to the NoBark 10R.You may put a
separate non-metallic collar on your dog’s neck and attach
a leash. Note: Be sure the extra collar does not interfere
with the contact points.
• Your dog may wear a harness for attaching a leash and/or
tags while wearing the NoBark 10R.
• Before playing with your dog, remove the NoBark 10R.The
activity may cause your dog to bark, which could lead to
him associating the play with the correction.
• Never leave the NoBark 10R on for more than 12
consecutive hours.
• We do not recommend that any of our products be used
on aggressive dogs.We recommend you contact your local
veterinarian or professional trainer to determine if your
dog might be aggressive.

www.sportdog.com 5
Key Definitions
Mode Switch: Adjusts the operating mode and level of
correction your dog receives when barking.This switch is also
used to turn the NoBark 10R on and off.
Sound-Activated Sensor: Detects your dog’s bark.
Contact Points: Deliver the safe correction.
Vibration Sensor Probe: Detects the vibrations of your dog’s
barking.
Display: Displays the current mode of operation based on the
color and the numeric indicator. Displays the condition of the
battery (Full, OK, Low).
Charge Port: Receptacle for the battery charger.
Battery Charger: Plugs into a standard wall receptacle for
charging the collar.
Contact Points
Sound
Activated
Sensor
Battery Charger
plugged into the
Charge Port
Mode Switch Display
Vibration
Sensor
Probe

6 1-800-732-0144
Charging
Before using the NoBark 10R for the first time, be sure to charge
the unit by following the steps described below.
The NoBark 10R contains a rechargeable battery pack.When the
unit indicates that the battery is low (battery icon on the display
indicates 1 bar or less and/or the light flashes red 3 times every 5
seconds) it is time to recharge the unit.
Average battery life is 3 to 6 months, depending on how often
your dog barks. However, due to greater use during your
dog’s training, your first battery charge may not last as long.
To conserve battery life, turn the NoBark 10R off when not
in use.
Follow these steps to charge the battery:
1. Remove the NoBark 10R from your dog.
2. Plug the battery charger into a standard household receptacle.
3. Plug the other end of the battery charger into the NoBark 10R
charge port.The light will flash the sequence Green-Blue-Red
to indicate that charging has started.
4. During charging, keep the NoBark 10R in an open, well-
ventilated area.The light will flash red twice every 10 seconds
to indicate that charging is active.
5.When charging is complete, the battery charger will
automatically shut off, preventing overcharging.The light will
flash green twice every 10 seconds to indicate that charging
is complete.
Note:The battery should fully charge in less than 4 hours.
6. Remove the battery charger from the charge port.The light
will flash the sequence Red-Blue-Green to indicate the unit is
no longer charging.
7. Unplug the battery charger .

www.sportdog.com 7
Note:The NoBark 10R will automatically turn off when the battery
charger is connected to it.Therefore, following a charge, turn the unit back
on before using it.
Note: If the battery pack is very low (i.e. been used too long or stored for an
extended period of time) it may take some time for the unit to indicate that
charging has started. If the unit does not indicate that it is charging after 1
hour, please contact our Customer Care Center for help at 1-800-732-0144.
_____________________________________________________
Modes of Operation
The NoBark 10R has three modes of operation.These
three modes are indicated by the light color and the display
combination.The following table summarizes the three modes
and how they are displayed.
NoBark 10R Operating Modes Summary
Mode Display
1Temperament
Learning
Green light
2Progressive
Correction
Blue/Green light
3User-Selected
Correction
Blue light/Number
indicates the active
correction level
Note: In user-selected mode, always start training at the lowest level
of correction (Level 0).Watch how your dog reacts, and if necessary,
progress to the next correction level.
Note: When the operating mode is changed, the correction level is
automatically reset to Level 0.

8 1-800-732-0144
The NoBark 10R has a single push-button that allows you
to turn the unit on and off, display the current operating
mode, and change the operating mode.The following table
describes how to perform the different tasks.
Push-Button Functions
Task Steps to perform Indications
Turn the
collar on
Press and release
the push-button
while the unit is off.
The light will flash
green five times and
then display the
current operating
mode as described on
previous page.
Turn the
collar off
Press the push-
button until the
display goes blank
and the red light
comes on.Then,
release the push-
button.
The light will flash red
four times and stop
operating.
Display
current
operating
mode
Press the push-
button and hold
it for less than 2
seconds before
releasing it.
The unit will display
the current operating
mode, as described on
previous page, and the
battery condition.
If you continue to push the button for more than 5 seconds,
you will begin changing modes (see page 9).

www.sportdog.com 9
Push-Button Functions Continued
Task Steps to perform Indications
Change
active
operating
mode
1. Press the push-
button and hold
it for at least 5
seconds.
2. Continue to hold
the push-button to
advance to the next
available mode.
3.When the desired
mode is displayed,
release the push-
button.
4. Once the push-
button has been
released for 5
seconds, the new
operating mode will
go into effect.
5. If the push-button
is released too early,
simply press it again
within 5 seconds.
- Mode will advance
and be displayed as
described on page 7.
- Every 2 seconds the
mode will advance and
be displayed.
- The selected mode will
be displayed during
this time.
- The display will flash
four times and then
the unit will resume
normal operation using
the new operating
mode.
-The mode will advance
and continue as
described in Step 2.
The light will flash every five seconds to indicate the current mode.

10 1-800-732-0144
To Fit the NoBark 10R
Important:The proper fit and placement of your NoBark 10R
is important for effective operation.The contact points must
have direct contact with your dog’s skin on the underside of
his neck.
To assure a proper fit, please follow these steps:
1. Make sure the NoBark 10R is off.
2. Start with your dog standing
comfortably.
3. Place the NoBark 10R high on
your dog’s neck close to the
ears. Center the contact points
underneath your dog’s neck,
touching the skin.
Note: It is sometimes necessary to
trim the hair around the contact points to make sure that contact
is consistent.
4. Check the tightness of the NoBark 10R by inserting one
finger between the end of a contact point and your dog’s
neck.The fit should be snug but not constricting.
5. Allow your dog to wear the NoBark 10R for several minutes,
then recheck the fit. Check the fit again as your dog becomes
more comfortable with the NoBark 10R.
Important: Never leave the NoBark 10R on for more than 12
consecutive hours.