SportDOG NoBark 10R User manual

Please read this entire guide before beginning
Operating Guide
Please read this entire guide before beginning

2 1-800-732-0144
Thank you for choosing SportDOG Brand
™
. Used properly,
this product will help you train your dog efficiently and safely.
To ensure your satisfaction, please review this operating guide
thoroughly. If you have questions regarding this product’s
operation contact our Customer Care Center at 1-800-732-0144,
or visit our website at www.sportdog.com.
Please register your product within 90 days at www.sportdog.com.
By registering, you will enjoy the product’s full warranty and should
you ever need to call the Customer Care Center, we will be able to
help you faster. Additionally, you will not have to save your product
receipt as registering serves as proof of purchase. Most importantly,
SportDOG
™
will never give or sell your valuable information to
anyone.
_________________________________
Table of Contents
Components......................................................................3
How the SportDOG™NoBark 10R Works ..........................3
Key Definitions..................................................................5
Charging ...........................................................................6
Modes of Operation...........................................................7
To Fit the NoBark 10R ....................................................10
What to Expect During Use of the NoBark 10R ...............12
Regular Maintenance .......................................................13
Accessories ......................................................................13
Frequently Asked Questions.............................................14
Troubleshooting...............................................................16
Service.............................................................................17
Terms of Use and Limitation of Liability ..........................17

www.sportdog.com 3
How the SportDOG™NoBark 10R Works
The SportDOG NoBark 10R Collar uses several features designed
to shorten the training phase and promote good behavior:
• A patented sensor system provides the most reliable bark
detection available.The unit delivers a static correction via
the contact points only if it detects BOTH vibration from the
vocal cords AND the sound of the bark.
• Three user-selectable modes allow you to choose how
corrections are delivered:
1.The patent pending Temperament Learning (indicated by
green light, see mode chart for example on page 7) mode tracks
the number of corrections needed to substantially reduce (and in
most cases eliminate) the number of nuisance barks.The system
provides 10 levels of static correction. It begins with a low-level
correction (Level 0). However, if excessive barking continues, the
correction intensity will increase with each successive bark until
the barking stops.This correction level becomes the starting level
the next time the dog barks. Once the dog has learned to reduce
the barking, the initial warning corrections are reduced.
Components

4 1-800-732-0144
2. In Progressive Correction mode (indicated by blue/green
light, see mode chart for example on page 7), the correction
starts at the lowest level and progresses to the next level (to
a maximum of Level 9) each time your dog barks within
30 seconds of the previous bark. If your dog does not bark
again within 30 seconds, the correction will be reset to the
lowest level (Level 0).
3. In the User-Selected Correction mode (indicated by
blue light, see mode chart for example on page 7), the user
presets the correction level (0-9) that will be used every
time the dog barks.
Note: As a built-in safety feature, if your dog barks 15 times or more
within a 80 second period, the NoBark 10R will automatically shut
off for 3 minutes.This safety feature is active in all three modes of
operation.
Important:
• DO NOT attach a leash to the NoBark 10R.You may put a
separate non-metallic collar on your dog’s neck and attach
a leash. Note: Be sure the extra collar does not interfere
with the contact points.
• Your dog may wear a harness for attaching a leash and/or
tags while wearing the NoBark 10R.
• Before playing with your dog, remove the NoBark 10R.The
activity may cause your dog to bark, which could lead to
him associating the play with the correction.
• Never leave the NoBark 10R on for more than 12
consecutive hours.
• We do not recommend that any of our products be used
on aggressive dogs.We recommend you contact your local
veterinarian or professional trainer to determine if your
dog might be aggressive.

www.sportdog.com 5
Key Definitions
Mode Switch: Adjusts the operating mode and level of
correction your dog receives when barking.This switch is also
used to turn the NoBark 10R on and off.
Sound-Activated Sensor: Detects your dog’s bark.
Contact Points: Deliver the safe correction.
Vibration Sensor Probe: Detects the vibrations of your dog’s
barking.
Display: Displays the current mode of operation based on the
color and the numeric indicator. Displays the condition of the
battery (Full, OK, Low).
Charge Port: Receptacle for the battery charger.
Battery Charger: Plugs into a standard wall receptacle for
charging the collar.
Contact Points
Sound
Activated
Sensor
Battery Charger
plugged into the
Charge Port
Mode Switch Display
Vibration
Sensor
Probe

6 1-800-732-0144
Charging
Before using the NoBark 10R for the first time, be sure to charge
the unit by following the steps described below.
The NoBark 10R contains a rechargeable battery pack.When the
unit indicates that the battery is low (battery icon on the display
indicates 1 bar or less and/or the light flashes red 3 times every 5
seconds) it is time to recharge the unit.
Average battery life is 3 to 6 months, depending on how often
your dog barks. However, due to greater use during your
dog’s training, your first battery charge may not last as long.
To conserve battery life, turn the NoBark 10R off when not
in use.
Follow these steps to charge the battery:
1. Remove the NoBark 10R from your dog.
2. Plug the battery charger into a standard household receptacle.
3. Plug the other end of the battery charger into the NoBark 10R
charge port.The light will flash the sequence Green-Blue-Red
to indicate that charging has started.
4. During charging, keep the NoBark 10R in an open, well-
ventilated area.The light will flash red twice every 10 seconds
to indicate that charging is active.
5.When charging is complete, the battery charger will
automatically shut off, preventing overcharging.The light will
flash green twice every 10 seconds to indicate that charging
is complete.
Note:The battery should fully charge in less than 4 hours.
6. Remove the battery charger from the charge port.The light
will flash the sequence Red-Blue-Green to indicate the unit is
no longer charging.
7. Unplug the battery charger .

www.sportdog.com 7
Note:The NoBark 10R will automatically turn off when the battery
charger is connected to it.Therefore, following a charge, turn the unit back
on before using it.
Note: If the battery pack is very low (i.e. been used too long or stored for an
extended period of time) it may take some time for the unit to indicate that
charging has started. If the unit does not indicate that it is charging after 1
hour, please contact our Customer Care Center for help at 1-800-732-0144.
_____________________________________________________
Modes of Operation
The NoBark 10R has three modes of operation.These
three modes are indicated by the light color and the display
combination.The following table summarizes the three modes
and how they are displayed.
NoBark 10R Operating Modes Summary
Mode Display
1Temperament
Learning
Green light
2Progressive
Correction
Blue/Green light
3User-Selected
Correction
Blue light/Number
indicates the active
correction level
Note: In user-selected mode, always start training at the lowest level
of correction (Level 0).Watch how your dog reacts, and if necessary,
progress to the next correction level.
Note: When the operating mode is changed, the correction level is
automatically reset to Level 0.

8 1-800-732-0144
The NoBark 10R has a single push-button that allows you
to turn the unit on and off, display the current operating
mode, and change the operating mode.The following table
describes how to perform the different tasks.
Push-Button Functions
Task Steps to perform Indications
Turn the
collar on
Press and release
the push-button
while the unit is off.
The light will flash
green five times and
then display the
current operating
mode as described on
previous page.
Turn the
collar off
Press the push-
button until the
display goes blank
and the red light
comes on.Then,
release the push-
button.
The light will flash red
four times and stop
operating.
Display
current
operating
mode
Press the push-
button and hold
it for less than 2
seconds before
releasing it.
The unit will display
the current operating
mode, as described on
previous page, and the
battery condition.
If you continue to push the button for more than 5 seconds,
you will begin changing modes (see page 9).

www.sportdog.com 9
Push-Button Functions Continued
Task Steps to perform Indications
Change
active
operating
mode
1. Press the push-
button and hold
it for at least 5
seconds.
2. Continue to hold
the push-button to
advance to the next
available mode.
3.When the desired
mode is displayed,
release the push-
button.
4. Once the push-
button has been
released for 5
seconds, the new
operating mode will
go into effect.
5. If the push-button
is released too early,
simply press it again
within 5 seconds.
- Mode will advance
and be displayed as
described on page 7.
- Every 2 seconds the
mode will advance and
be displayed.
- The selected mode will
be displayed during
this time.
- The display will flash
four times and then
the unit will resume
normal operation using
the new operating
mode.
-The mode will advance
and continue as
described in Step 2.
The light will flash every five seconds to indicate the current mode.

10 1-800-732-0144
To Fit the NoBark 10R
Important:The proper fit and placement of your NoBark 10R
is important for effective operation.The contact points must
have direct contact with your dog’s skin on the underside of
his neck.
To assure a proper fit, please follow these steps:
1. Make sure the NoBark 10R is off.
2. Start with your dog standing
comfortably.
3. Place the NoBark 10R high on
your dog’s neck close to the
ears. Center the contact points
underneath your dog’s neck,
touching the skin.
Note: It is sometimes necessary to
trim the hair around the contact points to make sure that contact
is consistent.
4. Check the tightness of the NoBark 10R by inserting one
finger between the end of a contact point and your dog’s
neck.The fit should be snug but not constricting.
5. Allow your dog to wear the NoBark 10R for several minutes,
then recheck the fit. Check the fit again as your dog becomes
more comfortable with the NoBark 10R.
Important: Never leave the NoBark 10R on for more than 12
consecutive hours.

www.sportdog.com 11
Important: For comfort, safety and effectiveness of this
product, please ensure the following:
• Check the fit to prevent excessive pressure by being able
to insert one finger between a contact point and your
dog’s skin.
• Examine your dog daily for any signs of a rash or sore.
• If a rash or sore is observed, discontinue the use of the
NoBark 10R for a few days.
• If the condition persists beyond 48 hours, see your
veterinarian.
• Your dog’s neck and the contact points must be washed
weekly with a wash cloth and mild hand soap, then
rinsed thoroughly.
A condition called Pressure Necrosis, which is a
devitalization of the skin due to excessive and prolonged
contact against the contact points, may occur if the steps
above are not followed.

12 1-800-732-0144
What to Expect During Use of the
NoBark 10R
Important: Do not leave your dog alone the first few
times he receives a correction.
Place the NoBark 10R properly on your dog and wait nearby
until he barks. Most dogs will understand quickly that the
NoBark 10R is disrupting their urge to bark and will relax
and stop barking. Because the correction may be surprising
or startling at first, some dogs may bark more at the initial
correction.
On rare occasions, a dog may get into a bark-correction-bark-
correction cycle. If this happens, reassure your dog with calm,
soothing tones. As your dog relaxes, he will understand that if
he becomes quiet, he will not receive more corrections. Of the
few dogs that have this reaction, it usually occurs only the first
time they wear the NoBark 10R.
You should notice a reduction in your dog’s barking within
the first couple of days that he wears the NoBark 10R. At this
point, it is important to remember the learning process is still
not complete. Dogs will “test” the new learning experience
and will increase their attempts to bark.This usually occurs
during the second week a dog wears the NoBark 10R. If this
does occur, remain consistent and do not alter your use of the
NoBark 10R.You must place the NoBark 10R on your dog in
every situation when you expect him to be quiet. If your dog is
not wearing the NoBark 10R, he may resume barking and his
learning would suffer a setback.

www.sportdog.com 13
Regular Maintenance
• Check your dog’s neck for irritation (daily).
• Check fit of NoBark 10R on dog (daily).
• Check if battery needs to be recharged (weekly).
• Clean contact points and wash neck (weekly).
______________________________________________________
Accessories
To purchase additional accessories for your SportDOG
™
NoBark 10R, contact the Customer Care Center at
1-800-732-0144 or visit our website at www.sportdog.com to
locate a retailer near you.
Component Part Number
Replacement Collar RFA-162-1
Replacement Battery Kit RFA-228

14 1-800-732-0144
Frequently Asked Questions
Will my dog stop
barking completely?
• The NoBark 10R
effectively and humanely
stops barking when it is
worn. It should only be
worn during periods of
unwanted barking.
Will another dog’s bark
set off the NoBark 10R?
• No
Is the NoBark 10R safe
and humane?
•Yes. The NoBark 10R
is designed to get your
dog’s attention, not to
punish him. However,
the initial correction
may startle your dog.
Will the NoBark 10R
work for my dog?
• The NoBark 10R is
safe and effective for
all breeds and sizes of
dogs, though it may
be too large for dogs
under 8 pounds to wear
comfortably.
Can I leave the NoBark
10R on my dog all the
time?
• No. Never leave the
NoBark 10R on
for more than 12
consecutive hours.

www.sportdog.com 15
Is it possible for my
dog to learn not to bark
only when the NoBark
10R is on?
•Yes. This is best
accomplished by placing
the NoBark 10R on your
dog only in situations
where you never want
him to bark, and never
placing the NoBark
10R on your dog in
situations where you find
it acceptable for him to
bark.
I have more than one
dog, but only one
dog with a barking
problem. Will it cause
problems between the
dogs if I keep them
together?
• It should not be a
problem, especially
if you follow the
procedures described in
this guide.
Can I attach a leash to
the NoBark 10R?
• No. This can result
in pulling the contact
points too tightly against
your dog’s neck. Attach a
leash to a separate, non-
metallic collar; making
sure the extra collar does
not put pressure on the
contact points.

16 1-800-732-0144
Troubleshooting
My dog keeps barking
(does not respond to
the correction).
• Tighten the NoBark 10R
and/or trim your dog’s
hair where the contact
points touch his neck
to ensure good skin
contact.
• Charge the NoBark 10R.
• If your dog still does
not respond, contact the
Customer Care Center
at 1-800-732-0144.
The NoBark 10R light
is not flashing.
• Make sure the NoBark 10R
unit is turned on.
• Charge the NoBark 10R.
• If the NoBark 10R
continues to fail
to indicate proper
operation, contact the
Customer Care Center
at 1-800-732-0144.

www.sportdog.com 17
Service
If you need service, please contact the Customer Care
Center at 1-800-732-0144 for help in troubleshooting and,
if necessary, to arrange a repair for your product (a service
charge may apply). Also, please visit our website at
www.sportdog.com for more Frequently Asked Questions and
Troubleshooting Tips.
______________________________________________________
Terms of Use and Limitation of Liability
1.Terms of Use
This Product is offered to you conditioned upon your
acceptance without modification of the terms, conditions,
and notices contained herein. Usage of this Product implies
acceptance of all such terms, conditions, and notices.
2. Proper Use
This Product is designed for use with dogs where training
is desired.The specific temperament of your dog may not
work with this Product.We recommend that you not use this
Product if your dog is less than 8 pounds or if your dog is
aggressive. If you are unsure whether this is appropriate for
your dog, please consult your veterinarian, certified trainer
or contact our Customer Care Center at 1-800-732-0144.
Proper use includes reviewing the entire Operating and
Training Guide provided with your Product and any specific
Caution Statements.
3. No Unlawful or Prohibited Use
This Product is designed for use with dogs only.This dog
training device is not intended to harm, injure, or provoke.
Using this Product in a way that is not intended could result
in violation of Federal, State or local laws.

18 1-800-732-0144
4. Limitation of Liability
In no event shall Radio Systems®Corporation be liable for any
direct, indirect, punitive, incidental, special or consequential
damages, or any damages whatsoever arising out of or
connected with the use or misuse of this Product. Buyer
assumes all risks and liabilities from the use of this Product.
5. Modification of Terms and Conditions
Radio Systems Corporation reserves the right to change the
terms, conditions and notices under which this Product is offered.
______________________________________________________
FCC COMPLIANCE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
residential environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
guide, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a practical installation. If
this equipment causes harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Relocate the interfered receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
than the one to which the receiver is connected.
• Contact the Customer Care Center at 1-800-732-0144.

www.sportdog.com 19
Caution: Unauthorized changes or modifications to the
equipment, not approved by Radio Systems
®
Corporation,
could result in not meeting compliance with FCC
regulations and could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received,
including interference that may cause undesired operation.
______________________________________________________
Battery Disposal
This device operates on one battery of the type NiMH with
70mAH capacity. Replace only with equivalent battery received
from calling the Customer Care Center at 1-800-732-0144.
Separate collection of spent batteries is required in many
regions; check the regulations in your area before discarding
spent batteries. Please see below for instructions on how to
remove the battery from the product for separate disposal.
At end of product life, use these battery removal
instructions for final disposal:
• Using a #1 Phillips screwdriver, remove the case screws.
• Remove the case back or cover.
• Remove the old battery pack. Note:When removing the old battery
pack, care must be taken when gripping the connector firmly to avoid
damaging the wires. Shorting the battery wires may cause fire or explosion.
Note:These instructions are not valid for repair or battery replacement.
Replacing the battery with a battery not specifically approved by Radio
Systems
®
Corporation may cause fire or explosion. Please call the Customer
Care Center at 1-800-732-0144 to avoid voiding your warranty.