Squareled Hi-Precision 500W RGBAL Zoom User manual

User Manual: Squareled Hi-Precision 500W RGBAL Fresnel

1
SquareLED Hi-Precision
500 W RGBAL Fresnel
User Manual
M-L300J-RGBAL
V1.1

2
1. TECHNICAL PARAMETERS........................................................................ 3
1.1 ELECTRICAL PARAMETERS ..............................................................................3
1.2 OPTICAL PARAMETERS .................................................................................3
1.3 MECHANICAL AND PHYSICAL PARAMETERS........................................................3
2. ILLUMINATION CHART .................. FEHLER! TEXTMARKE NICHT DEFINIERT.
3. SAFETY WARNING................................................................................... 4
4. INSTALLATION ......................................................................................... 4
4.1 INSTALL AND METHOD .................................................................................4
4.2 POWER CONNECTION ............................... FEHLER!TEXTMARKE NICHT DEFINIERT.
4.3 DMX512 CONSOLE CONNECT ......................................................................6
5. OPERATION................................ FEHLER! TEXTMARKE NICHT DEFINIERT.
5.1 KEYS OPERATION ........................................................................................6
5.2 MANUAL SET:CTRL .......................................................................................6
5.3 SYSTEM INFO:INFO ......................................................................................7
5.4 LIGHT SETTING:SET ......................................................................................7
5.5 ADDRESS SET ADDR…………............……………………………………………….8
6. DMX512 CHANNELS................................................................................ 9
7. STANDARD ACCESSORIES .......................................................................10

3
1 Technical Parameters
1.1 Electrical Parameters
Input Voltage：100-240AC 50/60HZ
Power Consumption：≤350W
Control Signal：DMX512/master/slave mode
Control Channel：3/5 channels
DMX input/output interface: XLR 3PIN (In & Out)
Power Interface：Aviation head
1.2 Optical Parameters
Light Source：500W integrated cob source
Color（Light Source）： RGBAL
Beam Angle：20°- 35°
Dimmer：0-100%
Strobe：0-20Hz
1.3 Mechanical and physical parameters
Case Material：die-casting aluminum/aluminum/plastic
Protection Grade：IP22

4
Working Temperature：-20~40°C
Noise：36db
Net Weight：11KG
Dimension：507*380*440mm
2 Illumination Chart
3 Safety Warning
Notice：
●Professional technical people required to install and maintain this
equipment.
●This equipment has passed strict inspection before delivery.
●Users have to obey the safety and notice guide.
●Supplier won’t afford the accidents and losses that don’t operate the
fixture according to the operation guide and change it without
permission.

5
Important Notice:
●Make sure the power supply within the standard data range.
●The fixture’s power connection line can’t connect to any other
fixtures.
●The fixture’s DMX512 connection line can’t connect to any other
fixtures. That is each output of former fixture connects to the input of its
follower, and each output DMX line cannot be divided into more than
one outputs.
●Make sure the fixture is appropriately earthed before use this fixture
safely.
●Yellow-green line is earthed line, select the eligible power socket to
make sure the safety and operation; or cut off the plug and connect the
switch directly.
●To avoid the hard collision when installation, using or moving the
fixture.。
4 Installation
4.1 Install & Method
Horizon Installation:

6
▲Hanging angle adjustable to install on the suitable truss, show below:
Suspending installation:
Notice：Make sure the install location is safety and adapt to this fixture.
▲When install or use this fixture, make sure to keep a distance at least
0.3m with inflammable and explosive materials;
▲Use the proper tools to install the fixture in a right place;
▲The installation setting has to bear at least decuple weights
compared to the fixture itself, and make sure no metamorphoses within
one hour;
▲When use safety rope to install it, make sure the safety rope has to
bear at least decouple weights compared to the fixture itself. The safety
rope has the insurance buckle. Pulled the safety rope through the lock
hole at the bottom of fixture, then round the truss, then the end of the
rope tightly inserted to insurance buckle and tighten the screw, show
below:
Hanging angle
Hanging angle

7
4.2 Power Connection
□Power cable use 2.5mm2 copper core. When power serial connect,
AC220V connect 15 pcs fixtures Max; AC110V connect 8 pcs fixtures Max.
□DMX512 signal cable connect 20pcs fixtures Max; When the
distance between console and fixture, or distance between two fixtures,
longer than 50M then add a signal amplifier is very necessary.
□Recommend to plug a terminal in signal output socket of the last
fixture, which connected in the end of each signal transmission line. To
weld a 120Ω / 1W resistor between the male plug 2 and 3 feet to make a
terminal plug. The usage is to reduce the reflected wave interference
caused by the end of control signal cable's circuit open.
Hanging on
truss

8
4.3 DMX512 Console Connect
◇Serial connect the DMX512 console and signal cable.
◇DMX512 address code is reusable.
◇DMX512 address code can be any number between 001 to 512.
…………
DMX512 console
Series connection the console with lighting
, lighting with lighting
DMX Addr8
DMX Addr1

9
5 Operation
5.1 Key Operation
■ENTER ：Enter to next submenu, save and confirm the function data value
as we set.
■ UP ：Select the function submenu, upper circular adjust the data value.
■ DOWN ：Select the function submenu; down circular adjust the data value.
■ MENU ：back to previous menu or back to the main menu.
■DIM…: Turn the knob to adjust the brightness of the fixture.
■ZOOM…:Turn the knob to adjust the beam angle of the fixture.

10
CCT
FOCUS
STROBE
DIM_Speed
DIM_CRUVE
RESERVED
DIM
000-255
000-255
000-255
000-255
000-255
CTRL
000-255
5.2 Manual SET…CTRL
◇Press［ENTER］in Menu［CTRL］enter into manual setting
◇Press [ENTER] to cycle through the brightness [DIM], color temperature
[CCT], focus [ZOOM], press [UP]/[DOWM] to adjust and set the relevant data.
◇Press [MENU] to back to main menu and save automatically.
◇{CTRL}Each submenu option corresponds to 7 DMX512 channels;
◇It should be noted that [CTRL] is only valid when the luminaire has no DMX
signal input.

11
Personlity
Program
Language
Screen
MODE
English/Chinese
Reduce/Standard
PRO.0--PRO.3
Normal/Inverted
SET
DMX/MS
5.3 System INFO -INFO
◇Press{ENTER］in menu{INFO} to enter into system information;
◇Press [MENU] to back to main menu and save automatically;
◇Can view system version number{VER}，system running time{RUN
TIME},lamp source temperature{Temperature}
◇{PR], [IR] are DMX512 receiving information status information .
5.4 LIGHT SET…SET
PR
Run time
Temperature
INFO
VER
IR
Normal/Inverted
DMX ——
HOLD——ON

12
D.001-512
ADDR
◇Press [ENTER] in the [SET] menu to enter the fixture setting operation.
◇Press [UP]/[DOWN] to select the directory for this setting;
◇The [MODE] menu sets the lamp operation mode, [DMX] is the DMX
input status, and the [CTRL] menu cannot be changed when the DMX512
signal is input. The [M/S] status is the system demonstration test mode, and
the lamp does not receive the DMX signal.
◇[personality] menu sets the lamp channel mode, streamlined channel
mode [reduce], standard channel mode [standard]
◇[Program] built-in program selection
◇[Language] language selection
◇[Screen] screen shows inverted settings
5.5 DMX512 Address Code Setting
◇Press [ENTER] in the [ADDR] menu to enter the fixture setting
operation;
◇Press [UP]/[DOWN] to set the address code.

13
◇Press the [MENU] button to return to the main menu
◇Select the standard DMX512 signal cable to connect the lamps in
series;
◇Use the operation menu ADDR to set the DMX512 address code of the
fixture;
◇Set the same or different DMX512 addresses for different lamps
according to the actual situation on site.
6DMX512 Control Channel
Value
Function
Reduced
Standard
1
Hue
0-255
HUE 0 to 100%
2
H_fine
0-255
Hue_fine
Fine tuning

14
3
Saturation:
0-255
Zoom adjustment
Zoom in from big to
small
4
Dimmer intensity :
0-255
0-255
DIM from slow to
fast
5
CCT:
0-255
0-255
CCT from slow to
fast
7
ZOOM：
0-255
20-35°
Zoom 20-35°
8
Ctrl_onff：
0-1
HSIC MODE
HSIC control mode
1-255
Monochromatic MODE
Single color control
mode
9
Red Color:
0-255
Red 0 to 100%
10
Green Color:
0-255
Green 0 to 100%
11
Blue Color:
0-255
Blue 0 to 100%
12
Amber Color:
0-255
Amber 0 to 100%
13
Lime Color:

15
0-255
Lime 0 to 100%
14
Strobe:
0-5
0Hz
5-255
1-20Hz
Strobe from slow to
fast
15
Dimmer mode:
0-255
DIM from slow to
fast
Dimmer Curve:
000-005
None Function
006-064
Linear Dimmer Curve
065-128
Square Dimmer Curve
129-192
I-Square Dimmer Curve
193-255
S-Shape Dimmer Curve
0-255
255 continued over 3s
System reset
16
Fan Control:
0-127
Temprature control mode
128-191
Manual mode
192-255
High speed mode
17
Set Freq:
0-80
500Hz
Dimming frequency
81-160
2000Hz
Dimming frequency
161-240
8000Hz
Dimming frequency
240-255
17600Hz
Dimming frequency

16
7 Standard Accessories
Power Supply Cable x 1pc
Signal Cable x 1pc
Safety Rope x 1pc
User Manual x 1pc
Warranty x 1pc
Barn Door x 1set
European Standard Power Cable (optional)
American Standard Power Cable (optional)

Das Lichttechnikhaus Vertriebs GmbH
Rudolf-Diesel-Str. 3, D-89312 Günzburg
Telefon [phone]
Fax [phone]
E-Mail [email protected]
Web www.lth-gmbh.de