STA-RITE PLM Series User manual

Sta-Rite’s System:2 Mod Media™aboveground system is the
ultra-capacity filter that is ideally suited for aboveground
pools.The Mod Media design handles dirt loads up to 15
times greater than sand filters of equivalent size. Balanced
flow tank hydraulics direct water through each side of the
filter module for uniform dirt loading.That prevents clogging,
and captures more dirt between cleanings to minimize
maintenance time.
You may go an entire season before you need to clean
your PLM aboveground filter.
•You won’t clean often, but it’s easy when you do — just
rinse in place with a garden hose.
•Quiet, highly efficient pump options keep operating
costs low.
•Compact design fits easily in tight installations.
Greatest capacity for least maintenance
System:2 Mod Media™
PLM Series Aboveground Systems
by Sta-Rite®
The System:2 strips away particles as small as 20 microns
(an average grain of beach sand is 100 to 2000 microns
in diameter!).
PE34851.qxd 4/10/06 3:48 PM Page 1

www.staritepool.com
Phone: [phone] Fax: [phone]
4/06 Part # P1-727 ©2006 Sta-Rite. All rights reserved.
Top-mounted pressure gauge and information panels are
positioned for easy reading.
Split tank design permits rinse-in-place cleaning — super
simple to achieve thorough cleaning fast.
Posi-Ring®closure is safe, easy to secure properly every
time, and lasts for years.
System available with Sta-Rite ABG or JWP Series
aboveground pumps.
Spray-and-go simplicity
The Mod Media™system features a one-piece
filter module that simply drops into the easily
accessible tank. It’s foolproof! When cleaning is
necessary, just remove the lid (no tools are
needed) and spray-rinse the module while it
is still in place.*It only takes minutes to clean
thoroughly and get back into service fast.
Convenience and versatility
The Mod Media’s small diameter footprint is the perfect fit for new
and retrofit installations. Interchangeable ports provide multiple
plumbing options and the modular filter tank permits quick change
of filter media. Contemporary styling and matte black finish appear
attractive in any pool setting.
*Modules used in conjunction with certain pool/spa sanitizers may require
soaking in special cleaning solutions. Available from:
Filter Performance
For Pools
Pump* Filter Area up to (Gal.)
Model (HP) (Sq. Ft.) 8 Hr. Turnover
PLM100JWAE 1 100 28,800
PLM100JWAF 1 1 / 2100 33,600
PLM150JWAE 1 150 28,800
PLM150JWAF 1 1 / 2150 33,600
* Available with ABG or JWP Series aboveground pumps.
Operating Limits – Maximum continual operating pressure is 50 PSI. For
Pool/Spa (bather) applications, the maximum operating water temperature
within the filter is 104°F (40°C).
pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / maintenance products
System:2 Mod Media™
PLM Series Aboveground Systems
One-year limited warranty. See warranty for details.
PE34851.qxd 4/10/06 3:49 PM Page 2