Stahls WEEDING TABLE Service manual

Installation Instructions
& Manual
WEEDING TABLE
STAHLS‘ Europe GmbH • Dieselstraße 62 • D-66763 Dillingen • Tel. [phone] • www.stahls.eu

Stand 130418
Installation Instructions
Step 1
Carefully unbox your Weeding Table
and place it on a secure surface.
Step 2
Using the four (4) bolts and nuts provided,
attach the material hold down bracket to
the table.
Step 3
Secure the plug to the weeding table and
plug into a 240 V power outlet.
Step 4
Turn on the Weeding Table by the
power rocker switch located on the left
side of the table. Select the temperature.
Low - approx. 40°C
Medium - approx. 48°C
High - approx. 54 °C
The temperature light will turn GREEN
when proper temperature is reached.
Manual
Step 1
Adjust your Weeding Table to one of the
3 elevated heights, by lifting the outside
edge of the table and tilting. Be sure the
crossbar is secure before releasing.
Step 2
Secure medio to the Weeding Table
using the material hold down bracket or
simply place material on top of the table.
Step 3
The Weeding Table comes equipped
with a storage compartment on the front
of the unit
Step 4
The Weeding Table also has a ledge
for holding your STAHLS‘ EZ-Weeder®.