StarTech.com ST121HDFXA User manual

HDMI Over Fiber Extender with IR Control – SC
Fiber - 2600ft (800m) - 1920x1200/1080p
Product ID: ST121HDFXA
The ST121HDFXA is a long-range HDMI video extender kit that uses SC fiber optic cable to extend
video/audio from an HDMI-equipped device to a remote display up to 2600 feet (800 Meters) away. The
extender supports full High-Definition video (1920x1200 / 1080p) and includes both the transmitter and
receiver, for a complete ready-to-use digital signage solution.
Not only is this an incredibly long range solution that can extend an HDMI signal across or between
buildings, but because fiber optics transmit data using light rather than copper, it will not cause or be
effected by electromagnetic Interference (EMI).
For convenient, time-saving control of the media source, the HDMI extender also offers Infrared (IR)
extension, which enables you to control the HDMI audio-video source from either end of the connection.
The kit also includes optional mounting hardware for a clean and professional installation.
The ST121HDFXA HDMI over Fiber Optic Extender kit is TAA compliant and backed by a StarTech.com 2-
year warranty with free lifetime technical support.
www.startech.com/uk
0800 169 0408

Certifications, Reports
and Compatibility
Applications
• Extend an HDMI video source in a hospital, with no EMI
(electromagnetic interference)
• Connect a video source to a display across a large shopping complex
• Optimize placement of your demo stations at tradeshows and in
auditoriums
Features
• Extend HDMI video up to 2600ft (800m)
• Resolutions up to 1080p (1920x1200)
• Local transmitter and remote receiver units included
• Supports bi-directional IR communication
• Uses SC fiber optic cabling
• Ready for use with Blu-ray™ players
• No software or drivers required
www.startech.com/uk
0800 169 0408

Warranty 2 Years
Hardware Audio Yes
Cabling Fiber Optic
Daisy-Chain No
Ports 1
Rack-Mountable Yes
Performance Audio Specifications Supports Dolby® TrueHD, DTS-HD MA
IR Interface Bi-directional
38Khz / ±10° / 5M
Max Distance 800 m / 2600 ft
Maximum Cable Length 792.5 m [2599.3 ft]
Maximum Data Transfer Rate HDMI® - 3.4Gbps
Maximum Digital Resolutions 1080p @ 60Hz, 48-bit
Supported Resolutions 50 / 125 Multimode cabling
800 m at 1080p
1200 m at 1080i
62.5 / 125 Multimode cabling
350 m at 1080p
450 m at 1080i
Wide Screen Supported Yes
Connector(s) Local Unit Connectors 1 - HDMI (19 pin) Female
1 - Fiber Optic SC Duplex Female
1 - IrDA (Infrared, SIR/FIR) Female
Remote Unit Connectors 1 - HDMI (19 pin) Female
1 - Fiber Optic SC Duplex Female
1 - IrDA (Infrared, SIR/FIR) Female
Special Notes /
Requirements
Note If your video source is HDCP encrypted, your connected
display MUST be HDCP compliant. If the extender detects a
non-HDCP compliant display while you’re extending an
HDCP encrypted video source, the content will not display
System and Cable Requirements Multi-mode fiber cabling (50/125 or 62.5/125) terminated
with SC duplex connectors, is required to connect the
transmitter to the receiver.
Power Center Tip Polarity Positive
Input Voltage 9 ~ 12 DC
www.startech.com/uk
0800 169 0408

Output Current 1.5A
Plug Type M
Power Consumption (In Watts) 18
Power Source 2 AC Adapters Included
Environmental Humidity 0-80%
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -10°C to 60°C (14°F to 140°F)
Physical
Characteristics
Color Black
Enclosure Type Steel
Product Height 26 mm [1 in]
Product Length 129 mm [5.1 in]
Product Weight 457 g [16.1 oz]
Product Width 97 mm [3.8 in]
Packaging
Information
Shipping (Package) Weight 2 kg [4.4 lb]
What's in the Box Included in Package 1 - Local HDMI® Extender Unit
1 - Remote HDMI® Receiver Unit
1 - IR Receiver Cable
1 - IR Transmitter Cable
2 - Mounting Brackets
1 - 7 ft [2.1 m] Multi-mode SC-SC duplex Fiber Optic cable
2 - Foot Pad Set
2 - Universal Power Adapter NA / UK / EU
1 - User Manual
Product appearance and specifications are subject to change without notice.
www.startech.com/uk
0800 169 0408