StarTech.com VGA2HDPRO2 User manual

Manual Revision: 01/19/2015
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
VGA2HDPRO2
VGA to HDMI® video converter with scaler
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Product Diagram ....................................................................................1
Front View .................................................................................................................................................... 1
Rear View...................................................................................................................................................... 1
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Hardware Installation............................................................................2
Operation ................................................................................................4
Technical Support ..................................................................................5
Warranty Information............................................................................5

Instruction Manual
1
Product Diagram
Front View
Rear View
1. VGA input
2. 3.5mm analog audio input
3. SPDIF digital optical audio input
4. USB service port (only required for rmware updates)
5. Power adapter port
1. HDMI output
2. SPDIF digital optical audio output
3. 3.5mm analog audio output
4. On screen display menu button
5. On screen display operation buttons

Instruction Manual
2
Introduction
Packaging Contents
• 1x VGA to HDMI converter & scaler
• 1x 4ft (1.2m) VGA cable
• 1x 6ft (1.8m) 3.5mm to RCA cable
• 1x Universal power adapter (US/UK/EU/AUS)
• 1x Quick install guide
System Requirements
• VGA source device (i.e. computer system)
• HDMI display device (i.e. monitor or projector) with cabling
Hardware Installation
Note: Please ensure all devices are powered o before you begin installation.
1. Connect the VGA output on your VGA source device to the VGA input on the VGA to
HDMI converter using the included VGA cable.

Instruction Manual
3
2. (optional) If you would like to include audio on your HDMI output signal, connect an
audio cable from your source device to either the 3.5mm audio input (analog) or the
SPDIF input (digital), depending on your available or desired audio output on your
source device.
Note: An RCA to 3.5mm audio cable is included for RCA audio sources. If your audio
source is anything dierent (i.e. 3.5mm or SPDIF) additional cabling is required.
3. Connect the HDMI output on the VGA to HDMI converter to the HDMI input on your
HDMI display device using an HDMI cable (not included).

Instruction Manual
4
4. Connect the VGA to HDMI converter to an available electrical outlet using the
included power adapter.
Operation
On screen display
The HDMI to VGA converter and scaler features an on screen display (OSD) menu that
enables you to adjust various picture settings to customize your output based on
your specic application. To access the OSD menu, press the on screen display menu
button, on the back of the VGA to HDMI converter.
To navigate the OSD menu, use the menu operation buttons (+ up) and (- down) on
the back of the VGA to HDMI converter, and the menu button to select each option on
the menu.
For complete OSD operation instructions please download the full product menu
at StarTech.com.
Factory default settings
Follow the below steps to restore the VGA to HDMI converter to the default settings.
1. Ensure the VGA to HDMI converter is powered on.
2. Hold down both the + and – operation buttons at the same time for three seconds.
3. The VGA to HDMI converter has now been restored to default settings.
Download the complete instruction manual at StarTech.com/support

Instruction Manual
5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.