Stealth Cam PX Series User manual

PX Series
Instruction Manual
R1

Page 2
To ensure the product is being utilized to its full potential, we recommend checking
our website for new product updates. If your camera is having an issue, please check
our website to determine you are using the latest rmware or software version.
Notice
TECHNICAL SUPPORT
EMAIL:
[email protected]
Please allow 48 hours for email
response.
GSM, LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504
CUSTOMER SERVICE
CONTACT & HOURS
Toll Free: 877-269-8490
CALL CENTER HOURS
Mon – Fri / 8 AM – 5 PM (CST)
WEBSITE
www.stealthcam.com
Contact Us

Page 3
Table of Contents
About Your Camera 4
Quick Setup Guide 5
Camera Overview 6
Camera Setup 7
Camera Conguration 8
Viewing and Deleting Images 11
Frequently Asked Questions 12
Camera Care 13
Limited Warranty Information 14

Page 4
About Your Camera
Energy E󰀩cient Design
Completely re-energized to optimize energy e󰀩ciency.
Burst Rapid-Fire Mode
Rapid-re Burst Mode, multiple exposures per triggering.
Quick Set Options
Set up in seconds with pre-programmed options.
Expand Storage Space
Expand your storage space with an SD memory card up to
32 GB.
IR Night Time Photos
IR LED lights will perfectly illuminate night time photos

Page 5
Quick Setup Guide
Insert Batteries and SD Card
Install 8 AA batteries and a class 10 SD card into camera.
Mount Camera
Mount the camera at the desired location using the strap
mount, Python Lock cable, Articulating Ball Joint Mount, or
other desired mounting mechanism. Position the camera so
that it does not face East or West directly as the rising and
setting of the sun can cause false positive triggers.
Activate Camera
Set camera to desired Quick Set (QSET) or to custom
conguration and place in desired vantage point to start
capturing photos of game.

Page 6
Camera Overview
Inside Side
Bottom

Page 7
Camera Setup
Battery Installation
To remove the batteries, open the case to see plastic door covering
inlaid battery tray. First, remove plastic battery door. Once exposed,
insert 8 AA batteries, ensuring that orientation matches markings
placed on plastic. Once batteries are properly installed, simply
replace battery door back to original position.
SD Card Installation
The SD card slot is located on the
left side of the camera. With the
camera open, insert SD card with
the label facing you. Only minimal
resistance should be felt as card is
inserted and a click when the card
is fully inserted.

Page 8
Camera Conguration
This camera features 5 distinct modes of oper-
ation:
TEST | QSET 1 | QSET 2 | QSET 3 | CUSTOM
Each setting is activated based upon the position
of the dial inside the unit.
Name Type Quality Timeout
Delay Detail
QSET 1 Photo Medium 30 sec 3 Photos
QSET 2 Photo Medium 30 sec 1 Photo
QSET 3 Video 640 x 480 30 sec 10 sec video
Quick Sets
Once selected, a Quick Set (QSET) will briey display the following on
the screen placed above the dial:
dLY 30 – (Delay) Counts down from 30 sec to 0 sec
rdY – (Ready) Camera is in a ready and active state
See table for breakdown of Quick Set modes.

Page 9
Custom Conguration
The CUSTOM setting on your camera allows you to customize every
setting to t your exact needs. To begin, move the dial to the CUSTOM
position and press the Up or Down arrows on the camera.
Once inside the custom settings menu, use the Up and Down arrows to
scroll through the di󰀨erent settings. To change a setting that is displayed,
press the Enter key and the setting will begin ashing. At this point use
the Up and Down arrows to change the setting. When nished press the
Enter button to save the change.
When you are nished conguring your camera’s settings, use the Up
or Down arrows to scroll to Quit, and press Enter to leave camera
conguration.

Page 10
MODE: This setting will change the operation
mode of the camera. Di󰀨erent operation modes will
have di󰀨erent adjustment settings
OPTIONS: Photo | Video
DATE: This setting is used by the camera to display
the correct date on the Info Bar of the image.
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 6 photos
Note: This setting is only applicable in photo
mode.
DELAY: This setting is used to determine how long
the camera will wait before reinitializing the PIR
sensor after taking a photo.
OPTIONS: 5 sec | 10 sec | 15 sec | 30 sec |
60 sec | 120 sec
RESOLUTION: This setting will determine the
quality of each image. A higher quality will result in
better photos and take more memory space.
OPTIONS: Low | Medium | High
Note: This setting is only applicable in photo
mode.
VIDEO LENGTH: This setting is used to determine
the length of time, in seconds, of a video recording
OPTIONS: 5 sec | 15 sec | 30 sec
Note: This setting is only applicable in video
mode.
TIME: This setting is used by the camera to display
the correct time on the Info Bar of the image.
Camera Conguration cont.
FACTORY RESET: This option will reset the
camera to its factory defaults. This will erase any
CUSTOM camera setup present.
OPTIONS: Yes | No
DELETE SD: This setting is used to format the SD
memory card installed. Formatting your SD card
will ERASE ALL DATA PRESENT. To format card,
change setting to Yes and press Enter.
NOTE: After card is formatted it is impossible to
restore data that was present on card.
QUIT: Pressing Enter on this setting will allow you
to exit the camera conguration menu and return
your camera to a ready state.