STEELGREEN SG52 User manual

INSTRUCTION MANUAL
SG52 VIBRATION BRACKET INSTRUCTIONS
PLEASE NOTE
The supplied vibraon brackets MUST be installed or warranty will be void.

2
SG52 VIBRATION BRACKET INSTRUCTIONS
NOTE: Instrucons are the same for both right & le sides.
STEP ONE: Remove the safety shield from the tank support.
STEP TWO: Loosen the four tank bolts on the front & 3 tank
bolts on the rear, do not completely remove the bolts.
NOTE: If necessary , remove the rear re for easier access.
VIBRATION BRACKET KIT
ITEM PART NUMBER QTY. DESCRIPTION
1R21-166 1VIBRATION BRACKET
2R21-166-L1VIBRATION BRACKET, LEFT
3HFSSC-3813 4HEX BOLT, 3/8" X 3/4"
4HFSSC-51675 4HEX BOLT, 5/16" X 3/4"
5CB-3751SS 2CARRIAGE BOLT, 3/8 X 1
6HFNCS-516S 4HEX NUT, 5/16

3
SG52 VIBRATION BRACKET INSTRUCTIONS
RIGHT SIDE
STEP THREE: Install the vibraon brackets.
NOTE: The tanks should be loose from step two
and able to move for proper alignment with
the brackets.
LEFT SIDE

4
SG52 VIBRATION BRACKET INSTRUCTIONS
STEP FOUR: Tighten the four tank bolts on the front & 3
tank bolts on the rear.
STEP FIVE: Reaach the safety shield to the tank
support.
Steel Green Mfg.
920 S State Road 39
Lebanon, IN 46052
(756)-481-2890
www.steelgreenmfg.com SG52 Vibraon Bracket Instrucons