Stern TRENDY SOAP DISPENSER B Product manual

1
TOUCH FREE DECK MOUNTED SOAP DISPENSERS
InstallatIon and maIntenance guIde
EXTREME
ELITE
TRENDY

1
INDEX
TECHNICAL DATA
Capacity  Liter \ . oz., or  Liters / . Gallons
Power Supply Battery Box for xD Alkaline batteries or V transformer
Soap viscosity    cPs
Standard discharge .cc (customizable by optional remote control)
Sensor range  mm +/-  mm /..” (customizable by optional
remote control)
TRENDY SD 1.6 E

EXTREME SD 1.6 E

ELITE SD 1.6 E

TRENDY
SOAP DISPENSER B

TRENDY
SOAP DISPENSER E

EXTREME
SOAP DISPENSER B

EXTREME
SOAP DISPENSER E

ELITE
SOAP DISPENSER B

ELITE
SOAP DISPENSER E

The information in this document reflects products at the date of printing. Stern Engineering Ltd reserves the right, subject to all applicable laws, at any time, at its sole discretion,
and without notice, to discontinue or change the features, designs, materials and other specications of its products, and to either permanently or temporarily withdraw any of the
forgoing from the market. All information in this document is provided “as is” without warranty of any kind, either expressed or implied, including but not limited to any implied
warranties of merchantability, tness for a particular purpose, or non-infringement. Stern Engineering Ltd assumes no responsibility for errors or omissions in the information
presented in this document. In no event shall Stern Engineering Ltd be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever
arising out of or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this document, including their
design, are the property of Stern Engineering Ltd or other third parties and you are not permitted to use them without the prior written consent of Stern Engineering Ltd or such
third party as may own them.
 TECHNICAL DATA
 PRE-INSTALLATION INFO
 PACK CONTENTS
 INSTALLATION
 FILLING THE SOAP TANK
 SETTINGS ADJUSTMENT
 BATTERY REPLACEMENT
 SPARE PARTS LIST
 MAINTENANCE
 LIMITED WARRANTY
 TROUBLESHOOTING

1
INDEX
TECHNICAL DATA
Capacity  Liter \ . oz., or  Liters / . Gallons
Power Supply Battery Box for xD Alkaline batteries or V transformer
Soap viscosity    cPs
Standard discharge .cc (customizable by optional remote control)
Sensor range  mm +/-  mm /..” (customizable by optional
remote control)
TRENDY SD 1.6 E

EXTREME SD 1.6 E

ELITE SD 1.6 E

TRENDY
SOAP DISPENSER B

TRENDY
SOAP DISPENSER E

EXTREME
SOAP DISPENSER B

EXTREME
SOAP DISPENSER E

ELITE
SOAP DISPENSER B

ELITE
SOAP DISPENSER E

The information in this document reflects products at the date of printing. Stern Engineering Ltd reserves the right, subject to all applicable laws, at any time, at its sole discretion,
and without notice, to discontinue or change the features, designs, materials and other specications of its products, and to either permanently or temporarily withdraw any of the
forgoing from the market. All information in this document is provided “as is” without warranty of any kind, either expressed or implied, including but not limited to any implied
warranties of merchantability, tness for a particular purpose, or non-infringement. Stern Engineering Ltd assumes no responsibility for errors or omissions in the information
presented in this document. In no event shall Stern Engineering Ltd be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever
arising out of or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this document, including their
design, are the property of Stern Engineering Ltd or other third parties and you are not permitted to use them without the prior written consent of Stern Engineering Ltd or such
third party as may own them.
 TECHNICAL DATA
 PRE-INSTALLATION INFO
 PACK CONTENTS
 INSTALLATION
 FILLING THE SOAP TANK
 SETTINGS ADJUSTMENT
 BATTERY REPLACEMENT
 SPARE PARTS LIST
 MAINTENANCE
 LIMITED WARRANTY
 TROUBLESHOOTING

2
3
PRE-INSTALLATION INFO
PACK CONTENTS
Familiarize yourself with the part names and conrm that the parts are included.
Check contents
Separate all parts from the packaging and check each part with the “Pack contents”
section.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your touch free soap dispenser until
you obtain the missing parts.
Warnings
Do not install the system facing a mirror or any other electronic system operated by an
infra-red sensor.
To prevent reflection problems, it is recommended to keep a minimum distance of
. meters between the soap dispenser and any other objects.
Stern liquid soap dispensers, with proper care, will provide long term trouble free
service. Quality liquid soap of recommended viscosity and pH levels are the main
factors for smooth operation of your dispenser. If needed, use a viscometer to verify the
viscosity of your soap to ensure maximum benet. The recommended range for liquid
soap viscosity is  cPs. Thicker liquid soap flows slower and inhibits the pump
valve, causing strain and damage.
Stern liquid soap dispensers are suitable for use with any generic liquid soap of the
correct viscosity and pH. The pH level of all soap used in Stern liquid soap dispensers
should be between . to .. Lower levels will cause corrosion to the metal dispenser
and even the rubber and plastic components. Higher pH levels will cause swelling to
rubber parts and degradation of plastic components over time.
IMPORTANT: Keep in mind that when using the faucet installed next to the soap
dispenser, the user hands should not interfere with the soap dispenser sensor
detection area.
1 X BODY AND FIXINg ACCESSORIES
1 X SOAP TANK wITH BOTTLE SUPPORT
AND PUMP ASSEMBLY
1 X BATTERY BOX FOR 6XD ALKALINE
BATTERIES \ 12V TRANSFORMER

2
3
PRE-INSTALLATION INFO
PACK CONTENTS
Familiarize yourself with the part names and conrm that the parts are included.
Check contents
Separate all parts from the packaging and check each part with the “Pack contents”
section.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your touch free soap dispenser until
you obtain the missing parts.
Warnings
Do not install the system facing a mirror or any other electronic system operated by an
infra-red sensor.
To prevent reflection problems, it is recommended to keep a minimum distance of
. meters between the soap dispenser and any other objects.
Stern liquid soap dispensers, with proper care, will provide long term trouble free
service. Quality liquid soap of recommended viscosity and pH levels are the main
factors for smooth operation of your dispenser. If needed, use a viscometer to verify the
viscosity of your soap to ensure maximum benet. The recommended range for liquid
soap viscosity is  cPs. Thicker liquid soap flows slower and inhibits the pump
valve, causing strain and damage.
Stern liquid soap dispensers are suitable for use with any generic liquid soap of the
correct viscosity and pH. The pH level of all soap used in Stern liquid soap dispensers
should be between . to .. Lower levels will cause corrosion to the metal dispenser
and even the rubber and plastic components. Higher pH levels will cause swelling to
rubber parts and degradation of plastic components over time.
IMPORTANT: Keep in mind that when using the faucet installed next to the soap
dispenser, the user hands should not interfere with the soap dispenser sensor
detection area.
1 X BODY AND FIXINg ACCESSORIES
1 X SOAP TANK wITH BOTTLE SUPPORT
AND PUMP ASSEMBLY
1 X BATTERY BOX FOR 6XD ALKALINE
BATTERIES \ 12V TRANSFORMER