Stevens TOT Mate TM2125R User manual

1
#0964-3126
3594.TM2125/TM2127/TM2128.9/25/18
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
CAUTION – CHOKING HAZARD
Adult assembly required due to presence
of small parts and sharp edges.
ATTENTION
Please unpack and assemble in an area away from children's activities. Remove all tools
and excess materials from work area after assembly of unit is complete. Dispose of pallet
and packaging materials in an environmentally friendly manner. If any parts are missing
or damaged, please call Stevens for immediate parts replacement (1-800-350-3270).
When ordering parts, give the Model Number and Color of the unit.
TM2125R
Toddler Play Center
3DUWV/LVW
3$5747<,7(0
;;
;;
;;
;;




'(6&5,37,21
(QG8
7RS
%RWWRP
5DLO6XSSRUW
*HDU%ORFN7RWPDWH5HG[
/HJR3ODWH/DUJH*UD\/*3[
7UD\&OHDULQ)6$
6FUHZ&RQQ+['F1LPP[PP
TM2127R
Preschool Play Center
NOTE: ASSEMBLY INSTRUCTIONS REFERENCE
ILLUSTRATIONS AND PART NUMBERS FOR THE TM2125R.
076,QYHQWRU
\
3DUWV/LVW
3DUWV/LVW
3$5747<,7(0
;;
;;
;;
;;




'(6&5,37,21
7RS
%RWWRP
5DLO6XSSRUW
(QG8
/HJR3ODWH/DUJH*UD\/*3[
7UD\&OHDULQ)6$
6FUHZ&RQQ+['F1LPP[PP
*HDU%ORFN7RWPDWH5HG[
TM2128R
Preschool Play Center
3$5747<,7(0
;;
;;
;;
;;




'(6&5,37,21
7RS
%RWWRP
(QG8
5DLO6XSSRUW
/HJR3ODWH/DUJH*UD\/*3[
7UD\&OHDULQ)6$
6FUHZ&RQQ+['F1LPP[PP
*HDU%ORFN7RWPDWH5HG[
076,QYHQWRU\3DUWV/LVW
3DUWV/LVW
by Stevens Industries, Inc.
704 West Main St.
Teutopolis, IL 62467
P: 800.350.3270
P: 217-857-7100 • F: 217-857-7101
www.totmate.com
TM2125R
TM2127R
TM2128R

TM2125R – TM2127R – TM2128R
STEP-BY-STEP ASSEMBLY
2#0964-3126
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM2125/TM2127/TM2128.9/25/18
Confirmat Bolt (8)
(Screw Conn HxDc Ni 7mmx50mm)
Hex Wrench
HARDWARE / TOOLS INCLUDED
ILLUSTRATIONS AND PART NUMBERS ARE FOR TM2125R.
BASIC ASSEMBLY INSTRUCTIONS ARE THE SAME FOR ALL 3 MODELS.
2-PERSON ASSEMBLY RECOMMENDED.
IMPORTANT!
Be sure to keep all parts supported during assembly to avoid damage.
Do not over-tighten screws or it will damage the pre-drilled holes;
snug fit is adequate.
raw edge
3DUWV/LVW
3$5747<,7(0
;;
;;
;;
;;




'(6&5,37,21
(QG8
7RS
%RWWRP
5DLO6XSSRUW
*HDU%ORFN7RWPDWH5HG[
/HJR3ODWH/DUJH*UD\/*3[
7UD\&OHDULQ)6$
6FUHZ&RQQ+['F1LPP[PP
TM2125R

TM2125R – TM2127R – TM2128R
STEP-BY-STEP ASSEMBLY
3
#0964-3126
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.3594.TM2125/TM2127/TM2128.9/25/18
Lay one End (1) flat on floor, with side having the
most holes facing up. (NOTE: Raw edge is top
edge.)
STEP
1
Insert dowel on Rail Support (4) into lower hole at
top of End (1). Press firmly into place.
STEP
2
Insert dowels on one end of Bottom (3) into
remaining holes on End (1). Press firmly into
place.
STEP
3
Position other End (1) on top of assembly, so
dowels on Rail Support (4) and Bottom (3) align
with holes on End (1). Press firmly into place.
STEP
4
Secure End (1) to Rail Support (4) and Bottom
(3) with three Confirmat Bolts (8), using the
included Hex Wrench.
STEP
5
raw (top) edge
raw (top) edge
Carefully turn unit over, so other End (1) is facing
up.
STEP
6

TM2125R – TM2127R – TM2128R
STEP-BY-STEP ASSEMBLY
4#0964-3126
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM2125/TM2127/TM2128.9/25/18
Repeat Step 5 to secure other End (1) to Rail
Support (4) and Bottom (3).
STEP
7
Carefully stand unit upright and align holes on
bottom side of Top (2) with dowels on top edge
of Ends (1), making sure the pre-installed Lego
Plates (6) are facing up. Press Top (2) firmly into
place.
STEP
8
Secure Top (2) to Ends (1) with four Confirmat
Bolts (8).
STEP
9
The 4-piece Gear Block Grid (5) fits onto the
Lego Plates (6), or can be set aside for later use.
Trays (7) are included for storage on lower shelf.
STEP
10
Ensure that all joints and bolts are tight.
STEP
11
This completes the assembly.