Steelcase Turnstone Campfire Screen User manual

R
©2010 Steelcase Inc.
Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
Page 1 of 3
939500550 Rev B
Campfire™Screen
1
2
COVER
FRAME
2. Orient the cover to the frame.
NOTE: A "LH" or "RH" sticker is located
on the bottom of the frame. A
corresponding LH/RH tag is located on the
fabric sock.
NOTE: The 2" x 2" Velcro piece is the
front inside corner.

3 6
57
GLIDE
Page 2 of 3
939500550 Rev B
3. Drape cover over the frame
4. Flip the unit upside down.
5. Pull the cover over the angle
side.
6. Align the top seams to the top
of frame.
7. Pull the inside corner (over the
glide).

9
10
2“ x 2” PIECE OF
VELCRO
VELCRO
8
Page 3 of 3
939500550 Rev B
8. Pull the cover over the 4"
side.
9. "Pull tightly" and secure the
inside velcro (2" x 2" piece).
10. Attach the remaining
velcro pieces.
NOTE: If there is looseness
toward the bottom of the inside
V, tighten up further the two
Velcro pieces on either side of
the center 2" x 2" pieces of
Velcro. We've repositioned
these slightly to help keep the
inside radius at tight as
possible.