Stirling IA0850 User manual

01
AFTER SALES SUPPORT
1300 777 137 [email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Carpet Cleaner
Model Number: IA0850
INSTRUCTION MANUAL

AFTER SALES SUPPORT
1300 777 137
02
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Welcome
Congratulations on choosing to buy a Stirling® product.
All products brought to you by Stirling® are manufactured to the highest standards of performance
and safety and, as part of our philosophy of customer service and satisfaction, are backed by our
comprehensive 3 Year Warranty.
We hope you will enjoy using your purchase for many years to come.

AFTER SALES SUPPORT
1300 777 137
03
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Contents
02 Welcome
04 Warranty Details
05 General Information and Safety Instructions
08 Product Overview
09 Getting Started
11 Instructions
14 Other Useful Information
17 FAQ
20 Repair and Refurbished Goods or Parts Notice

AFTER SALES SUPPORT
1300 777 137
0404
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Carpet Cleaner
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period of 36
months from the date of purchase. Defects that occur within this warranty period, under normal
use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this
warranty are in addition to all rights and remedies in respect of the product that the consumer has
under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

AFTER SALES SUPPORT
1300 777 137
05
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
General Information and
Safety Instructions
RETAIN FOR FUTURE USE
Read this manual thoroughly before first use, even if you are familiar with this type of product. The
safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly
adhered to. Please keep this user manual in a safe place along with your purchase receipt and carton
for future reference. If applicable, pass these instructions and packaging on to the next owner of the
appliance. Always follow basic safety precautions and accident prevention measures when using an
electrical product.
Electrical Safety and Cord Handling
1. Before turning on the Carpet Cleaner, ensure the electrical voltage and frequency of the circuit
corresponds to those indicated on the rating label of the product.
2. To protect against fire and electric shock, do not immerse the product, cord set or plug in water
or any other liquid.
3. Do not use an extension cord unless completely necessary with the Carpet Cleaner. If an
extension cord is used, please ensure that it has a rating equal or exceeding the rating of this
product.
4. Do not pull or carry by cord, use cord as a handle, close a door on the cord, or pull cord around
sharp edges or corners. Keep cord away from heated surfaces.
5. Do not bend or damage the power cord.
6. Never force the plug into an outlet.
7. Always unplug the Carpet Cleaner when not in use. To disconnect from the power supply, grip the
plug and pull from the power outlet. Never pull by the cord. The plug must be removed from the
power outlet before cleaning, servicing, maintenance or moving the Carpet Cleaner.
8. To avoid a hazard, do not use the Carpet Cleaner if the plug, cord or the Carpet Cleaner itself is
damaged. Please contact the After Sales Support line for further advice.
9. Do not run over the cord with the Carpet Cleaner.
10. Unless your home is already fitted with a residual current device (safety switch), we recommend
installing an RCD with a rated residual operating current not exceeding 30mA to provide
additional safety protection when using electrical appliances. See your electrician for professional
advice.
11. Do not handle the plug, cord or the Carpet Cleaner with wet hands.
12. If the supply cord is damaged it must be replaced by the manufacturer, it’s service agent or
similarly qualified persons in order to avoid a hazard.

AFTER SALES SUPPORT
1300 777 137
06
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
General Information and
Safety Instructions (cont)
Usage Conditions and Restrictions
1. The Carpet Cleaner is intended for indoor household use only and not for commercial purposes.
2. Do not use the Carpet Cleaner for other than its intended use.
3. The Carpet Cleaner is not a toy. Supervise young children to ensure they do not play with this
product.
4. The Carpet Cleaner is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience or knowledge, unless they have been given
supervision or instruction concerning use of the product by a person responsible for their safety.
5. Do not leave the Carpet Cleaner unattended when plugged in. Always switch off and unplug
when you are not using the Carpet Cleaner.
6. This unit has no user-serviceable parts contained within. Do not attempt to repair, disassemble or
modify the Carpet Cleaner.
7. Improper installation or misuse may result in the risk of fire, electric shock or injury to person.
8. The manufacturer is not responsible for any eventual damage caused by improper or faulty use.
9. The use of attachments not sold or recommended by the manufacturer may cause fire, electric
shock or injury.
10. The Carpet Cleaner is not intended to be operated by means of an external timer or any type of
separate remote control system.
11. Keep the Carpet Cleaner on the floor while operating.
12. To reduce the risk of electric shock, do not use outdoors.

AFTER SALES SUPPORT
1300 777 137
07
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
General Information and
Safety Instructions (cont)
Handling and Usage
1. To reduce the risk of electrocution, never operate this product with wet hands, submerge in water
or spill liquids into the product.
2. Do not use the Carpet Cleaner near a window as rain may cause electric shock.
3. Do not put any objects into the openings of the Carpet Cleaner or operate when the openings are
blocked. Keep the openings free of anything that may reduce the airflow.
4. Do not use the Carpet Cleaner on any glowing, burning or smoking particles.
5. Do not use the Carpet Cleaner without the clean/waste water tank.
6. Do not use to pick up flammable or combustible liquids such as petrol, or use where they may be
present.
7. Do not attempt to remove blockages with sharp objects as this may cause damage to the Carpet
Cleaner.
8. Do not hold the Carpet Cleaner upside down or lay on its side, doing so may cause waste water
to run into the motor. Use the appliance in an upright position.
9. Use extra care when using the Carpet Cleaner on stairs.
10. Do not carry the Carpet Cleaner while the motor is still on.
11. Keep hair, loose clothing, fingers and all parts of body away from the openings or moving parts.
12. Do not use to pick up any liquid other than cleaning solution and water dispensed from this
machine.
13. Do not expose Carpet Cleaner to rain.
14. Carpets should be dry vacuumed thoroughly before cleaning.
15. Cleaning filters maintains cleaning performance. Ensure filters are completely dry before inserting
back into the machine.

Product Overview
AFTER SALES SUPPORT
1300 777 137
08
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
13. Clean Water Release Trigger
14. Power Cord Tidy
15. Upper Power Cord Holder
16. Power Cord
17. Lower Power Cord Holder
18. Handle Release Pedal
1. Handle
2. Carry Handle
3. Clean Water Tank Cap
4. ON/OFF Switch
5. Clean Water Tank Release Handle
6. Clean Water Tank
7. Waste Water Tank Locking Latch
8. Waste Water Tank Handle
9. Inlet Filter (not visible when waste water tank is fitted.)
10. Scrubbing Brush
11. Exhaust Filter
12. Waste Water Tank
1
2
3
8
9
10
12
11
7
6
5
4
14
16
18
15
13
17
Included (not pictured):
2 x Assembly screws, Instruction Manual, Quick Start Guide and Warranty Card.

AFTER SALES SUPPORT
1300 777 137
09
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Getting Started
Before First Use
Prior to using your Carpet Cleaner, please read all the safety and operating instructions thoroughly.
Please ensure you follow the steps below before using this appliance. We recommend you keep the
original packaging for storing your Carpet Cleaner when not in use.
1. Unpack the product but keep all packaging material until you have made sure your new Carpet
Cleaner is undamaged and in good working order. Plastic wrapping can be a suffocation hazard
for babies and young children, so ensure all packaging materials are out of their reach.
2. Remove the twist-tie which is securing the electrical cord. Uncoil the cord and straighten it to
remove any kinks. Do not use this product if these parts are damaged. In case of damage, phone
the After Sales Support line.
Assembly
The Carpet Cleaner comes in two pieces (top part with handle and trigger, and bottom part being the
rest of the body) which makes assembling quick and easy.
NOTE: Do not plug the cord into a power outlet until the Carpet Cleaner is fully assembled.
CAUTION: Do not over tighten the screws as this will thread the holes. Do not operate the
Carpet Cleaner without the handle securely screwed into place.
1. Place the body of the Carpet Cleaner in
an upright position.
2. Align the handle to the grooves on the
body of the Carpet Cleaner.
3. Once handle is in place, secure to the
body of the Carpet Cleaner with the 2
screws supplied. See Fig. 1.
Fig. 1

AFTER SALES SUPPORT
1300 777 137
10
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Getting Started (cont)
Carpet Preparation
Before cleaning your carpets, here are some steps to help you prepare the area to be deep cleaned.
1. Move the furniture from the room to be cleaned (optional).
2. Using a dry vacuum cleaner, vacuum the area to be deep cleaned.
3. For high traffic areas such as entry and hallways, a commercial pre-treater can be used (optional).
4. Plan your cleaning route, it is recommended to begin cleaning in the corner furthest away from
your exit point.
Check for Colour Fastness
Before cleaning your carpets, it is recommended to do a patch test for colour fastness.
1. Dampen a white cloth with water and gently rub a small area to be cleaned which is out of sight.
2. Check the cloth for bleeding, if the cloth remains clean, it is safe to clean the carpets.
NOTE: Do not use the Carpet Cleaner as a dry vacuum cleaner.

AFTER SALES SUPPORT
1300 777 137
11
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Instructions
Preparing the Carpet Cleaner for Use
NOTE: Only use low foam carpet cleaning solutions as using the incorrect solution may cause
excess foaming. Excess foam will prevent the machine from working effectively. It is also
recommended to purchase anti-foam solution to add to the waste water tank to prevent excess
foaming. Please follow the recommended usage quantity listed on the bottle. These are both
available from all good hardware and DIY outlets as well as professional carpet cleaning stores.
4. Return the clean water tank back into the original position within the Carpet Cleaner. To lock
and secure, push the clean water tank back and press down on the handle until both the
handle and the water tank clicks into place.
CAUTION: Do not use the Carpet Cleaner if the clean water tank is not securely in position.
NOTE: The Carpet Cleaner can also be used without carpet cleaning solution. Water alone can
also clean your carpets.
CAUTION: Do not use any solvents, cleaners with strong acidic or strong alkali formulas or any
type of cleaning solution not specifically for use in carpet extraction cleaning machines.
CAUTION: Keep Carpet Cleaning Solution out of reach of children. In case of contact with
eyes, rinse immediately with plenty of water and seek medical advice. As with all detergents,
people with sensitive or damaged skin should avoid prolonged contact with the product.
Fig. 2 Fig. 3
1. Remove the clean water tank from the
Carpet Cleaner and fill with water. To remove,
lift the clean water tank release handle up
and pull away from the Carpet Cleaner. See
Fig. 2 and 3.
2. Unscrew the clean water tank cap and add
1 capful of your desired carpet cleaning
solution (not included). Only use 1 capful of
cleaning solution per tank.
3. Fill the rest of the clean water tank with warm
water (max 40ºC) and replace the clean
water tank cap.

AFTER SALES SUPPORT
1300 777 137
12
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Instructions (cont)
Using the Carpet Cleaner
1. Plug the cord into a power outlet and switch on at the outlet.
2. To turn the Carpet Cleaner ON, press the O/I switch to the “I”
position.
3. Step on the release pedal to lower the Carpet Cleaner into the
cleaning position. See Fig. 4.
4. While pressing the water release trigger, pull the Carpet
Cleaner in a backwards motion. Water and solution will only
be released when pressing this trigger. Let go of the water
release trigger and push the Carpet Cleaner forward on the
same path to loosen and remove waste water and solution
from the carpet. For heavy soiled areas, repeat if necessary.
When the Carpet Cleaner has been powered on, the vacuum
will continually operate until powered off.
NOTE: For best cleaning results, use a steady, moderate, forward and backward motion. Always
work from backward and forward, across the room to avoid stepping on the wet carpet.
NOTE: Do not over saturate the carpet with solution while using the Carpet Cleaner.
5. Once you have finished cleaning, turn the Carpet Cleaner OFF. Press the O/I switch to the “O”
position.
NOTE: Allow for the carpet to completely dry before walking on. If necessary to walk on, place
a towel on the area to be walked on.
NOTE: Wipe the cleaning solution from any door frames or furniture to prevent damage.
NOTE: The Carpet Cleaner may leave a small pool of solution in the location that it was
turned off. This is normal and the excess solution can be wiped away with a white, soft
cloth. This can be minimised by releasing the water release trigger and then carrying out one
more back and forward cycle before switching OFF. This will ush out most of the residual
solution left in the tubes.
Fig. 4
The Stirling Carpet Cleaner uses water, cleaning solution and the sturdy floor brushes to loose
embedded dirt from the carpet. The Carpet Cleaner then removes this dirt and collects it in the waste
water tank.

AFTER SALES SUPPORT
1300 777 137
13
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
1. Turn off the Carpet Cleaner by pressing the O/I
switch to the “O” position.
2. Push the waste water tank latch backwards to
release the handle, then remove the waste water
tank by pulling the handle up and towards you. See
Fig. 5.
3. Remove the cap on the waste water tank and
discard the waste water within, then rinse out the
waste water tank with warm water. Replace the
cap, ensuring the cap is in the lock position. See
Fig. 6.
4. Return the waste water tank back to its original
position. To secure, push the handle back until it
locks into position with the waste water tank latch
(you will hear a loud click).
Emptying the Waste Water Tank
The Carpet Cleaner is fitted with an automatic shut
off which prevents the extractors from picking up and
over filling the waste water tank. Here are a couple of
indications of when you may need to empty the waste
water tank:
• The motor sound rises in pitch.
• You do not see any more water coming through the
waste water tank.
• The water inside the waste water tank has risen to
the top of the tank and is visible through the clear
tank.
How to Remove the Waste Water Tank
Instructions (cont)
Fig. 5
Fig. 6

AFTER SALES SUPPORT
1300 777 137
14
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Other Useful Information
Cleaning and Maintenance
1. Switch off and unplug the Carpet Cleaner at the power outlet.
2. Remove the clean water tank and discard any water remaining within the tank. Rinse with warm
water (40ºC max) to clean.
3. Remove the waste water tank and discard any waste water within the tank. Rinse with warm
water (40ºC max) to clean.
4. If necessary, remove any hair or large pieces of debris from the Scrubbing Brush.
5. Clean the exterior of the Carpet Cleaner using a soft damp cloth and dry thoroughly.
Cleaning the Filters
1. The exhaust filter is found in the waste
water tank. Remove the exhaust filter by
pressing down the latch then pulling the
waste water tank handle fully forward to
expose the exhaust filter latch. Pull the
exhaust filter latch forward to release, then
pull out the exhaust filter forward and left to
remove. See Fig. 7.
2. Remove the filter sponge from the filter and
rinse with water to remove all the dust, dirt
and particles. Allow to dry thoroughly before
replacing back into the waste water tank.
See Fig. 8 and 9.
3. The filter inlet sponge is found in the bottom
on the Carpet Cleaner, under the waste
water tank. To access it, first remove the
waste water tank. Pull out the filter inlet
sponge, then rinse, then rinse with warm
water to clean off any dirt that has become
attached. Allow it to dry thoroughly before
replacing back into position in the Carpet
Cleaner. See Fig. 10.
Fig. 7
Fig. 8 Fig. 9
Fig. 10
NOTE: If for some reason you need a new filter sponge or filter inlet
sponge, do not return this product to place of purchase. Instead,
please call the After Sales Support line for a replacement filter.
NOTE: Do not leave water in either of the water tanks. Mineral deposits and mildew can form
which will affect the performance of the Carpet Cleaner.

AFTER SALES SUPPORT
1300 777 137
15
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015 15
Other Useful Information (Cont)
After Cleaning
After you have finished cleaning your carpet, here are a few tips to follow.
• Allow the carpet to dry completely, and try not to walk on it.
• If it is necessary to walk on the carpet, place some towels on the area to walk on.
• If the carpet is not completely dry and furniture must be placed back into the room cleaned, place
plastic under the furniture to prevent the carpet from getting stained.
• Thoroughly clean the waste water tank with warm (MAX 40ºC) tap water once you have finished
cleaning.
• To assist with the drying process, increase the air circulation by setting up fans to blow across the
area cleaned and leave doors and windows open.
Storage
• BeforepackingawaytheCarpetCleanerforstorage,ensureitiscleananddry.
• WerecommendstoringtheCarpetCleanerinitsoriginalcartontoprotectitfromdust,with
all the parts and accessories.
• StoretheCarpetCleanerinacleananddryplace,outofchildren’sreach.
• Donotplaceheavyobjectsontopduringstorage.
NOTE: If you wish to enquire about purchasing spare parts for your Stirling Carpet Cleaner
please contact 1300 777 137.

AFTER SALES SUPPORT
1300 777 137
16
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015 16
Other Useful Information (cont)
Responsible Disposal
At the end of its working life, do not throw this product out with your household rubbish. Electrical
and electronic products contain substances that can have a detrimental effect on the environment
and human health if disposed of inappropriately. Observe any local regulations regarding the disposal
of electrical consumer goods and dispose of it appropriately for recycling. Contact your local
authorities for advice on recycling facilities in your area.
Please keep the original packaging carton and materials in a safe place. It will help to prevent any
damage if the product needs to be transported in the future. In the event it is to be disposed of,
please recycle all packaging material where possible.
If you require another copy of this instruction manual please contact [email protected] to
obtain an electronic copy.
The Carpet Cleaner has been fully tested and meets all requirements as set out by the below testing
standards:
AS/NZS 60335.1
AS/NZS 60335.2.2
AS/NZS CISPR14.1
Specification Table
MODEL: IA0850
COLOUR: GREY and BLUE
VOLTAGE: 220-240V, 50-60Hz Class II IPX4
POWER: 600W
DIMENSIONS: 109 x 26 x 42cm
NET WEIGHT: 6.0kgs
WARRANTY: 3 Years
VOLUME OF CLEAN WATER TANK: 1.8L
VOLUME OF WASTE TANK: 2.45L
LENGTH OF POWER CORD: 6m
Version No: 1.2
Issue Date: 4 Sept 2015

AFTER SALES SUPPORT
1300 777 137
17
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
FAQ
Problem Solution
Why is the Carpet Cleaner not working? • Check you have plugged the cord into
the power outlet correctly and that it is
switched on.
• Check you have pressed the ON/OFF
switch to the “I” position.
• Check if the waste water tank is full and if
so, empty it.
Why isn’t there any water spraying from the
Carpet Cleaner?
• Check there is water and solution inside
the clean water tank.
Why is the Carpet Cleaner not picking up the
water and solution?
• Check that you have fitted the waste water
tank correctly.
• Check if the waste water tank is full and if
so, empty it.
Why is there liquid escaping from the Carpet
Cleaner?
• Check if the waste water tank is full, and if
so, empty it.
• Prior to switching OFF the Carpet Cleaner,
release the clean water release trigger
and carry out one back and forward cycle
before switching OFF. This will flush out
any residual solution left in the tubes.

AFTER SALES SUPPORT
1300 777 137
18
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Notes

AFTER SALES SUPPORT
1300 777 137
19
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Notes

AFTER SALES SUPPORT
1300 777 137
20
[email protected]
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Carpet Cleaner
Repair and Refurbished
Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be
returned to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as
files stored on a computer hard drive, telephone numbers stored on a mobile telephone,
songs stored on a portable media player, games saved on a games console or files stored
on a USB memory stick) during the process of repair, some or all of your stored data may
be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where
they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 777 137 or write to us at:
UNCLE BILL’S AUSTRALIA PTY LTD
PO Box 6292
Silverwater NSW 1811 Australia
1300 777 137
Opening Hours - 9:00am - 4:30pm (Mon-Fri), 9:00am - 3:00pm (Sat)