Stryker ST1 6300 User manual

SSTT11™™ aanndd SSTT11--XX™™ SSeerriieess SSttrreettcchheerr
OOppeerraattiioonnss MMaannuuaall
6300
CS HR PL
DA HU PT
DE IT RO
EL KO RU
ES LT SK
ET LV SL
FI NL SV
EN FR NO ZH
KK-6300 Rev 01 2020/06

SSyymmbboollss
Refer to instruction manual/booklet
Operating instructions/Consult instructions for use
General warning
Caution
Warning; crushing of hands
No pushing
Do not lubricate
Catalogue number

Serial number
 
For US Patents see www.stryker.com/patents
CE mark
Authorized representative in the European Community
European medical device
XXXX
Manufacturer (XXXX indicates year of manufacture)
Safe working load
Maximum patient weight
Mass of equipment with safe working load
Type B applied part
Wash by hand
KK-6300 Rev 01 EN

Do not tumble dry
Do not dry clean
Do not iron
Allow to completely air dry
Chlorinated bleach
Lubricate
EN KK-6300 Rev 01

TTaabbllee ooff CCoonntteennttss
Warning/Caution/Note Definition ....................................................................................................................2
Summary of safety precautions......................................................................................................................3
Pinch points...........................................................................................................................................5
Introduction ..................................................................................................................................................6
Product Description................................................................................................................................6
Indications for use ..................................................................................................................................6
Clinical benefits......................................................................................................................................7
Expected service life...............................................................................................................................7
Expected life ...................................................................................................................................7
Disposal/recycle..............................................................................................................................7
Contraindications ...................................................................................................................................7
Specifications ........................................................................................................................................7
Product illustration .................................................................................................................................9
Applied parts........................................................................................................................................10
Contact information ..............................................................................................................................10
Serial number location..........................................................................................................................11
Serial number location ...................................................................................................................11
Setup.........................................................................................................................................................12
Setup the mattress ...............................................................................................................................12
Operation...................................................................................................................................................13
Applying and releasing the brakes .........................................................................................................13
Base controls.......................................................................................................................................14
Raising the litter ...................................................................................................................................15
Lowering the litter.................................................................................................................................15
Positioning the product in Trendelenburg ...............................................................................................15
Positioning the product in Reverse Trendelenburg ..................................................................................15
Transporting a patient with the retractable fifth wheel ..............................................................................16
Transferring a patient between surfaces.................................................................................................16
Positioning or stowing the head end push handles option ........................................................................16
Positioning or stowing the foot end push handles option..........................................................................17
Raising the siderail...............................................................................................................................18
Lowering the siderail.............................................................................................................................18
Raising or lowering the Fowler backrest.................................................................................................19
Storing objects in the base hood............................................................................................................19
Positioning the two-stage permanently attached IV pole option ................................................................20
Accessories and parts.................................................................................................................................21
Attaching the defibrillator tray/chart holder..............................................................................................21
Attaching and positioning the removable IV pole.....................................................................................22
Attaching the upright oxygen bottle holder..............................................................................................23
Attaching the paper roll holder...............................................................................................................24
Locating the patient restraint strap tie-ins ...............................................................................................26
Inserting or removing X-ray cassettes ....................................................................................................26
Cleaning ....................................................................................................................................................28
Cleaning the product ............................................................................................................................28
Remove iodine.....................................................................................................................................28
Special instructions ..............................................................................................................................29
Cleaning the mattress...........................................................................................................................29
Disinfecting the product...............................................................................................................................30
Disinfecting the mattress.......................................................................................................................30
Preventive maintenance..............................................................................................................................32
Retractable fifth wheel lubrication ..........................................................................................................33
KK-6300 Rev 01 1 EN

WWaarrnniinngg//CCaauuttiioonn//NNoottee DDeeffiinniittiioonn
The words WWAARRNNIINNGG,CCAAUUTTIIOONN, and NNOOTTEE carry special meanings and should be carefully reviewed.
WWAARRNNIINNGG
Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe
potential serious adverse reactions and safety hazards.
CCAAUUTTIIOONN
Alerts the reader of a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the
user or patient or damage to the product or other property. This includes special care necessary for the safe and effective
use of the device and the care necessary to avoid damage to a device that may occur as a result of use or misuse.
NNoottee -- Provides special information to make maintenance easier or important instructions clearer.
EN 2 KK-6300 Rev 01

SSuummmmaarryy ooff ssaaffeettyy pprreeccaauuttiioonnss
Always read and strictly follow the warnings and cautions listed on this page. Service only by qualified personnel.
WWAARRNNIINNGG
• Always allow the product to reach room temperature before you set up the product or test functional operations.
Permanent product damage may occur.
• Always operate the product only when all operators are clear of the mechanisms.
• Always use mattress (6300-0-100, 6300-0-102, 6300-0-103, or 6300-0-104) on the Stryker Model 6300 SSTT11 and SSTT11--XX
Series stretcher. Use of any other mattress may result in patient injury.
• Always use caution when you use a mattress thicker than 6.35 cm (2.5 inches) with SSTT11--XX option. Operator supervision
is recommended to reduce the risk of patient falls due to lesser siderail coverage.
• Always use linens with the mattress.
• Do not stick needles into the mattress cover. Holes may allow body fluids to enter the inside (inner core) of the mattress
and may cause cross-contamination or product damage.
• Always use the mattress with a compatible frame as indicated in the specification section of this manual.
• Always apply the brakes when a patient is getting on the product or off the product or when the product is not moving.
Injury could result if the product moves while a patient is getting on the product or off the product.
• Always position the patient in the center of the product.
• Always put the product in the lowest position with the siderails up and latched when you leave a patient unattended. Do
not leave the product at a higher height.
• Always remove any devices that may be in the way before you raise or lower the litter.
• Do not sit on the end of the product. The product may tip.
• Always lock the siderails in the full up position with the sleep surface flat in the lowest position when you transport a
patient.
• Do not transport the product laterally on an incline greater than 6 degrees (10%) to avoid tipping. Always make sure that
the litter is horizontal (no Trendelenburg/Reverse Trendelenburg) at the lowest height when you transport a patient.
• Always apply the brakes on both the surface with the patient and the surface the patient will be transferred to before you
transfer a patient from one patient support platform (bed, stretcher, gurney, operating table) to another patient support
platform.
• Always make sure that the patient support platforms are the same height before you transfer a patient.
• Always keep hands and fingers clear of the foot end push handles when you use the defibrillator tray/chart holder or
upright oxygen bottle holder.
• Always keep the patient’s limbs away from the siderail spindles when you raise or lower the siderail.
• Do not allow the siderails to lower on their own.
• Always keep hands and fingers clear of the Fowler backrest release handles and the Fowler backrest frame when you
lower the Fowler backrest.
• Always use caution when you raise a pneumatic Fowler backrest while a patient is on the product. Use proper lifting
techniques and get help, if necessary.
• Do not place items between the Fowler backrest and the litter frame when the Fowler backrest is raised.
• Do not hang IV bags that exceed the safe working load of 18 kg on the IV pole.
• Do not hang IV bags that exceed the safe working load of 4.5 kg on any hanger on the IV pole.
• Always make sure that the IV pole is at a low height to pass through door openings when you transport a patient.
• Do not use the IV pole as a push/pull device. Product damage may occur.
• Always use qualified personnel to assemble and attach accessories.
• Always use caution if the defibrillator tray/chart holder or upright oxygen bottle holder is attached to avoid pinching your
fingers when you position the foot end push handle option.
• Do not place items that exceed the safe working load of 14 kg on the defibrillator tray/chart holder.
• Do not use the defibrillator tray/chart holder as a push/pull device. Product damage may occur.
• Do not hang IV bags that exceed the safe working load of 6 kg on the IV pole.
• Do not hang IV bags that exceed the safe working load of 3 kg on any hanger on the IV pole.
• Do not place objects that exceed the safe working load of 18 kg in the upright oxygen bottle holder for all types.
• Do not use the upright oxygen bottle holder as a push/pull device. Product damage may occur.
KK-6300 Rev 01 3 EN

• Do not use the paper roll holder as a push/pull device. Product damage may occur.
• Do not hang items that exceed the safe working load of 1.5 kg on the paper roll holder.
• Always use caution when you attach restraint straps. Patient or operator injury may occur. Physical restraints, even if
secured, may result in serious harm to patients and operators, including entanglement, entrapment, physical injury, or
death.
• Always attach restraint straps or devices only at the identified attachment points of the product. Failure to do so may
result in patient or operator injury. Do not attach restraint straps to the siderail.
• Always refer to applicable state and federal restrictions and regulations and the appropriate facility protocols before you
use any restraint strap or device.
• Always refer to applicable state and federal restrictions and regulations for safety before you use the X-ray option with
radiation generating devices. Radiation generating devices may produce residual, stray, or scattered radiation.
• Always use caution when you take X-rays with the Fowler backrest in the upright position or when you use a lateral
cassette.
• Do not wash the internal components of this mattress. Discard the mattress if contamination is found inside.
• Do not immerse the mattress in cleaning or disinfectant solutions.
• Do not allow liquid to pool on the mattress.
• Do not iron, dry clean, or tumble dry the mattress cover.
• Do not clean, service, or perform maintenance while the product is in use.
• Do not steam clean, hose off, or ultrasonically clean the product. Use of these methods of cleaning is not recommended
and may void the product’s warranty.
• Always disinfect the mattress following your hospital protocols to avoid the risk of cross-contamination and infection.
• Do not use VViirreexx®® TTBB to disinfect this product.
• Do not use accelerated hydrogen peroxides or quaternaries that contain glycol ethers as they may damage the mattress
cover.
• Always inspect the mattress each time you clean the mattress cover. Follow your hospital protocols and complete
preventive maintenance each time you clean the mattress cover. If compromised, remove the mattress from use and
replace the product to prevent cross-contamination.
CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
• Always transport the SSTT11 and SSTT11--XX Series stretcher on floors made of wood, concrete, or ceramic tile. If floors are
covered with synthetic material, the relative humidity should be at least 30% to avoid electrostatic discharge.
• Do not use the hydraulics on the base to raise the product with a patient lift under the product.
• Do not place objects that exceed 60 lb (27 kg) in the base hood.
• Do not sit, step, or stand on the base hood.
• Always use authorized accessories with the SSTT11 and SSTT11--XX Series stretcher.
• Always use the 6300-1-000 mattress cover on the foam core.
• Always make sure that you wipe the product with clean water. Dry each product after cleaning. Some cleaning agents
are corrosive in nature and may cause damage to the product. Failure to follow these cleaning instructions may void
your warranty.
• Do not use cleaning agents and disinfectants with aggressive chemicals as they will reduce the expected life of the
mattress cover.
• Do not allow liquid to seep into the zipper area or watershed cover barrier when you clean the mattress bottom. Fluids
allowed to come in contact with the zipper may leak into the mattress.
• Always dry the mattress cover before you store, add linens, or place a patient on the surface. A dry product helps to
prevent impaired product performance.
• Do not overexpose the mattress cover to high concentrations of disinfectant solutions as they may degrade the mattress
cover.
• Failure to follow the manufacturing cleaning instructions and Stryker operational instructions may affect useful life of the
mattress.
EN 4 KK-6300 Rev 01

PPiinncchh ppooiinnttss
FFiigguurree 11 –– PPiinncchh ppooiinnttss ffoorr XX--rraayy ooppttiioonn oonnllyy
KK-6300 Rev 01 5 EN

IInnttrroodduuccttiioonn
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
NNoottee
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
PPrroodduucctt DDeessccrriippttiioonn
The Stryker Model 6300 SSTT11 and SSTT11--XX Series stretcher is a wheeled device that consists of a platform mounted on a
wheeled frame to support patients in a horizontal position. The stretcher provides the operator with a method to transport
patients within the interior of a healthcare facility by health professionals or trained representatives of the facility. The
Stryker Model 6300 SSTT11 and SSTT11--XX Series stretcher with the retractable fifth wheel optimizes traction and cornering to
improve overall mobility.
IInnddiiccaattiioonnss ffoorr uussee
The stretcher is for use by human patients in a MedSurg setting, including those mildly to critically ill. The stretcher is for
use in hospitals, institutions, and clinics as a short-term outpatient clinical evaluation, treatment, minor procedure, and
short-term outpatient recovery platform. The stretcher may also be used to transport deceased patients within an enclosed
healthcare facility. Operators for the stretcher include healthcare professionals (nurses, nurse aides, and medical doctors)
and bystanders who can use bed motion functions (service or maintenance personnel).
The stretcher may include use in, but is not limited to:
• Emergency department (ED)
• Trauma area
• Post-anesthesia care unit (PACU)
The SSTT11 and SSTT11--XX Series stretcher frame, litter mounted accessories, mattresses, and siderails can contact human skin.
See the specifications table for the intended environmental conditions.
The SSTT11 and SSTT11--XX Series stretcher is not for use for long-term (more than 24 hours) inpatient treatment and recovery.
This product is not for use in a home healthcare environment, as a sterile product, in a home health setting, in the presence
of flammable anesthetics, as a support for a patient in a prone position, with patients who have unstable spinal cord injuries,
or with an oxygen tent.
The SSTT11--XX Series stretcher with X-ray deck option provides an articulating radiographic patient support surface and a
platform below the patient support surface for X-ray cassette placement. The SSTT11--XX Series stretcher with X-ray deck option
allows the capture of clinical X-rays (AP full body, optional full body lateral, and optional upright chest) when used with a
medical X-ray system.
EN 6 KK-6300 Rev 01

CClliinniiccaall bbeenneeffiittss
Patient transport, facilitate treatment, and diagnostic
EExxppeecctteedd sseerrvviiccee lliiffee
The SSTT11 and SSTT11--XX Series stretcher with X-ray deck option has a 10 year expected service life under normal use,
conditions, and with appropriate periodic maintenance.
The casters have a minimum expected service life of 5 years dependent on normal use, conditions, and with appropriate
periodic maintenance.
EExxppeecctteedd lliiffee
The SSTT11™™ and SSTT11--XX™™ foam mattress has a 1 year expected life under normal use, conditions, and with appropriate
periodic maintenance.
DDiissppoossaall//rreeccyyccllee
Always follow the current local recommendations and/or regulations governing environmental protection and the risks
associated with recycling or disposing of the equipment at the end of its useful life.
CCoonnttrraaiinnddiiccaattiioonnss
None known.
SSppeecciiffiiccaattiioonnss
Safe working load indicates the sum of the
patient, mattress and accessory weight 250 kg
Maximum patient weight 215 kg
Overall length 2170 mm ± 10 mm
Overall width (siderails up) 790 mm ± 10 mm
Overall width (siderails down) 735 mm
Height Non X-ray X-ray
Minimum height 560 mm + 15 mm, - 25
mm 610 + 15 mm, - 25 mm
Maximum height 860 ± 10 mm 910 ± 10 mm
Fowler angle 0° to 90° (± 5°)
Trendelenburg/Reverse Trendelenburg +16°/-16° (± 3°)
KK-6300 Rev 01 7 EN

Minimum
clearance
Nominal 15.4 cm ± 5 mm
Under the hydraulic jacks 4.6 cm ± 5 mm
CCoommppaattiibbllee
mmaattttrreesssseess 66330000--00--110000 66330000--00--110022 66330000--00--110033 66330000--00--110044
Length 193 cm 193 cm 193 cm 193 cm
Width 62 cm 62 cm 62 cm 62 cm
Thickness 8 cm 10 cm 8 cm 10 cm
Weight 3.7 ± 1.0 kg 4.4 ± 1.0 kg 4.3 ± 1.0 kg 4.8 ± 1.0 kg
Foam Polyurethane Polyurethane Polyurethane Polyurethane
Cover Polyurethane and
polyamide coated
polyester
Polyurethane and
polyamide coated
polyester
Polyurethane and
polyamide coated
polyester
Polyurethane and
polyamide coated
polyester
Model with flame
barrier No No Yes Yes
NNoottee
• See mattress label for applicable flammability standards.
• This product is not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous
oxide.
• Specifications listed are approximate and may vary slightly from product to product.
Stryker reserves the right to change specifications without notice.
EEnnvviirroonnmmeennttaall ccoonnddiittiioonnss OOppeerraattiioonn SSttoorraaggee aanndd ttrraannssppoorrttaattiioonn
Temperature
100 °F
(38 °C)
50 °F
(10 °C)
122 °F
(50 °C)
14 °F
(-10 °C)
Relative humidity
75%
30%
90 %
20 %
In accordance with the European REACH regulation and other environmental regulatory requirements, the components that
contain declarable substances are listed.
DDeessccrriippttiioonn NNuummbbeerr SSuubbssttaannccee ooff vveerryy hhiigghh ccoonncceerrnn
((SSVVHHCC)) cchheemmiiccaall nnaammee
2 stage IV pole assembly 0785-035-101 bis(2-ethyklhexyl) phthatlate (DEHP)
2 stage IV pole assembly HM-19-108 bis(2-ethyklhexyl) phthatlate (DEHP)
EN 8 KK-6300 Rev 01

PPrroodduucctt iilllluussttrraattiioonn
A
B
C
D
E
F
G
H
I
J
K
L
M
B
A
N
ABrake/steer control pedal HPump pedal
BCaster ISiderail
CDefibrillator tray/chart holder J Siderail release handle
D Fowler backrest release handle K Uni-lower pedal
EIV pole LUpright oxygen bottle holder
FPop up push handle MX-ray deck
GPaper roll holder N Antistatic caster
KK-6300 Rev 01 9 EN

AApppplliieedd ppaarrttss
FFiigguurree 22 –– TTyyppee BB aapppplliieedd ppaarrttss
CCoonnttaacctt iinnffoorrmmaattiioonn
Contact Stryker Customer Service or Technical Support at: [phone].
Stryker Medical International
Kayseri Serbest Bölge Şubesi
2. Cad. No:17 38070
Kayseri, Turkey
Email: [email protected]
Phone: + 90 (352) 321 43 00 (pbx)
Fax: + 90 (352) 321 43 03
Web: www.stryker.com
NNoottee -- The user and/or the patient should report any serious product-related incident to both the manufacturer and the
Competent authority of the European Member State where the user and/or patient is established.
To view your operations or maintenance manual online, see https://techweb.stryker.com/.
Have the serial number (A) of your Stryker product available when calling your Stryker Customer Service. Include the serial
number in all written communication.
EN 10 KK-6300 Rev 01

SSeerriiaall nnuummbbeerr llooccaattiioonn
A
FFiigguurree 33 –– SSeerriiaall nnuummbbeerr llooccaattiioonn
SSeerriiaall nnuummbbeerr llooccaattiioonn
Unzip the mattress cover to locate the product label and serial number.
A
KK-6300 Rev 01 11 EN

SSeettuupp
To unpack your product, see the unpacking instructions that are attached to the product inside of the shipping crate.
WWAARRNNIINNGG
• Always allow the product to reach room temperature before you set up the product or test functional operations.
Permanent product damage may occur.
• Always operate the product only when all operators are clear of the mechanisms.
• Always use mattress (6300-0-100, 6300-0-102, 6300-0-103, or 6300-0-104) on the Stryker Model 6300 SSTT11 and SSTT11--XX
Series stretcher. Use of any other mattress may result in patient injury.
• Always use caution when you use a mattress thicker than 6.35 cm (2.5 inches) with SSTT11--XX option. Operator supervision
is recommended to reduce the risk of patient falls due to lesser siderail coverage.
CCAAUUTTIIOONN -- Always transport the SSTT11 and SSTT11--XX Series stretcher on floors made of wood, concrete, or ceramic tile. If
floors are covered with synthetic material, the relative humidity should be at least 30% to avoid electrostatic discharge.
Make sure that the product works before you put the product into service.
1. Apply the brake. Push on the product to make sure that all four casters are locked.
2. Release the brake. Push on the product to make sure that all four casters are unlocked.
3. Raise and lower the litter with the hydraulic lift system.
4. Raise the product to the highest position and put the product in the Trendelenburg position. Make sure that the head end
lowers to the full down position.
5. Raise the product to the highest position and put the product in the Reverse Trendelenburg position. Make sure that the
foot end lowers to the full down position.
6. Apply the fifth wheel and make sure that the fifth wheel guides and pivots the product.
7. Make sure that the siderails raise, lower, and lock in place.
8. Raise and lower the manual Fowler backrest (head section).
SSeettuupp tthhee mmaattttrreessss
WWAARRNNIINNGG
• Always use linens with the mattress.
• Do not stick needles into the mattress cover. Holes may allow body fluids to enter the inside (inner core) of the mattress
and may cause cross-contamination or product damage.
• Always use the mattress with a compatible frame as indicated in the specification section of this manual.
To setup the mattress:
1. Place the mattress on a compatible stretcher.
2. Make sure that you align the mattress with the Stryker logo at the head end of the stretcher.
3. Align the hook and loop fastener onto the bottom cover of the mattress to the litter deck of the stretcher.
4. Make sure that the water shed flaps cover the zipper.
5. Place linens on the mattress before patient use. Follow your hospital protocols.
EN 12 KK-6300 Rev 01

OOppeerraattiioonn
AAppppllyyiinngg aanndd rreelleeaassiinngg tthhee bbrraakkeess
WWAARRNNIINNGG -- Always apply the brakes when a patient is getting on the product or off the product or when the product is not
moving. Injury could result if the product moves while a patient is getting on the product or off the product.
To apply the brakes, push down on the brake (red) side of the brake/steer pedal. Push on the product to make sure that the
brakes work.
To release the brakes, push down on the steer (green) side of the brake/steer pedal.
KK-6300 Rev 01 13 EN

FFiigguurree 44 –– BBrraakkee sstteeeerr ppeeddaall
BBaassee ccoonnttrroollss
FFiigguurree 55 –– BBrraakkee sstteeeerr ppeeddaall
A
A
B
B
FFiigguurree 66 –– RRaaiissiinngg tthhee lliitttteerr wwiitthh tthhee ssiiddee ccoonnttrrooll hhyyddrraauulliiccss
EN 14 KK-6300 Rev 01

RRaaiissiinngg tthhee lliitttteerr
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always put the product in the lowest position with the siderails up and latched when you leave a patient unattended. Do
not leave the product at a higher height.
• Always remove any devices that may be in the way before you raise or lower the litter.
• Do not sit on the end of the product. The product may tip.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
To raise the litter, press down on the pump pedal (A) until you achieve the desired height (
Base controls (page 14)).
LLoowweerriinngg tthhee lliitttteerr
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always put the product in the lowest position with the siderails up and latched when you leave a patient unattended. Do
not leave the product at a higher height.
• Always remove any devices that may be in the way before you raise or lower the litter.
• Do not sit on the end of the product. The product may tip.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
To lower the entire litter, press down on the center of the uni-lower pedal (B) (
Base controls (page 14)).
To lower the head end of the litter, press down on side of the uni-lower pedal (B) closest to the head end of the product.
To lower the foot end of the litter, press down on the side of the uni-lower pedal (B) closest to the foot end of the product.
PPoossiittiioonniinngg tthhee pprroodduucctt iinn TTrreennddeelleennbbuurrgg
WWAARRNNIINNGG -- Always remove any devices that may be in the way before you raise or lower the litter.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
To position the product in the Trendelenburg position (head down), raise the litter to the highest height (
Raising the litter
(page 15)).
NNoottee -- Raise the litter to the highest height for a greater Trendelenburg angle.
To lower the head end of the product, push down on the side of the uni-lower pedal (B) closest to the head end (
Base
controls
(page 14)).
To lower the product from Trendelenburg position, push down on the center of the uni-lower pedal (B) until the litter is flat.
PPoossiittiioonniinngg tthhee pprroodduucctt iinn RReevveerrssee TTrreennddeelleennbbuurrgg
WWAARRNNIINNGG -- Always remove any devices that may be in the way before you raise or lower the litter.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
To position the product in the Reverse Trendelenburg position (foot down), raise the litter to the highest height (
Raising the
litter
(page 15)).
KK-6300 Rev 01 15 EN

NNoottee -- Raise the litter to the highest height for a greater Trendelenburg angle.
To lower the foot end of the product, push down on the side of the uni-lower pedal (B) closest to the foot end (
Base controls
(page 14)).
To lower the product from Reverse Trendelenburg position, push down on the center of the uni-lower pedal (B) until the
litter is flat.
TTrraannssppoorrttiinngg aa ppaattiieenntt wwiitthh tthhee rreettrraaccttaabbllee ffiifftthh wwhheeeell
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always remove any devices that may be in the way before you raise or lower the litter.
• Always lock the siderails in the full up position with the sleep surface flat in the lowest position when you transport a
patient.
• Do not transport the product laterally on an incline greater than 6 degrees (10%) to avoid tipping. Always make sure that
the litter is horizontal (no Trendelenburg/Reverse Trendelenburg) at the lowest height when you transport a patient.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
To transport a patient with the retractable fifth wheel:
1. Push down on the steer side of the brake/steer pedal to apply the fifth wheel.
2. Put the pedal in the neutral position to move the product laterally. Move the product to the desired location.
NNoottee -- Do not attempt to move the product laterally with the retractable fifth wheel applied.
3. Apply the brakes to lock the product in place.
NNoottee -- Always make sure that the brake is released before you move the product to avoid operator or patient injury.
TTrraannssffeerrrriinngg aa ppaattiieenntt bbeettwweeeenn ssuurrffaacceess
WWAARRNNIINNGG
• Always apply the brakes on both the surface with the patient and the surface the patient will be transferred to before you
transfer a patient from one patient support platform (bed, stretcher, gurney, operating table) to another patient support
platform.
• Always make sure that the patient support platforms are the same height before you transfer a patient.
To transfer a patient between surfaces:
1. Apply the brakes. Push on the product to make sure that the brakes work.
2. Lower the siderail facing the mating support surface to the lowest position.
3. Transfer the patient to the mating support surface.
4. Raise the siderail to the up and latched position.
PPoossiittiioonniinngg oorr ssttoowwiinngg tthhee hheeaadd eenndd ppuusshh hhaannddlleess ooppttiioonn
To position or stow the head end push handles:
1. Pull straight up on the head end push handles one at a time.
2. Pivot the head end push handles (A) to the use position (Figure 7).
3. Push down on the handles one at a time to lock the push handles into position.
EN 16 KK-6300 Rev 01