Style selections Camryn LWUSTCA User manual

1
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
ITEM #5120859
MODEL #LWUSTCA
SHELF AND ROD CONNECTOR
2
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Shelf 1
B Top frame 1
C Metal pole 1
C
B
HARDWARE CONTENTS (not shown actual size)
AA
EE
BB
FF
CC DD
1/4” x 12 mm
Bolt
Qty. 4
M4 x 35 mm
Screw
Qty. 10
Hex wrench
Qty. 1
M 4 x 15 mm
Bolt
Qty. 2
Pole holder
Qty. 2
1/4” x 38 mm
Bolt
Qty. 4
A
STYLE SELECTIONS is a trademark or registered
trademark of LF, LLC. All rights reserved.
Call customer service at 1-877-888-8225,8 a.m. - 8 p.m., EST, Monday - Sunday.

43
PREPARATION
SAFETY INFORMATION
WARNING
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
Please read and understand this entire manual prior to assembling the product.
1. Do not allow children to climb or play in or around this product.
2. Use this unit for its intended purpose only. Do not use shelves as step ladder.
3. To avoid damage, assemble the product on a sturdy, level and protective surface.
4. Make sure all bolts/screws are tightly fastened before the unit is used.
5. Check bolts/screws periodically and tighten them if necessary.
MAXIMUM LOAD: 30 lb
(EVENLY DISTRIBUTED)
MAXIMUM LOAD: 20 lb
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 25 minutes
Tools Required for Assembly (not included): Phillips Screwdriver.
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED. USE
WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN
INSTABILITY CAUSING POSSIBLE INJURY. DISTRIBUTE WEIGHT EVENLY.
ASSEMBLY INSTRUCTIONS
1. Attach top frame (B) to shelf (A). Secure in place
with M4 x 35 mm screws (BB).
2. Attach top frame (B) to unit (Item #5120860 &
5120857, sold separately), using 1/4” x 38 mm bolt (FF).
Tighten with hex wrench (CC).
Option 1
Option 2
2. Attach pole holders (EE) to metal pole (C), securing
with M4 x 15 mm bolts (DD).
1
2
2
AA
FF CC
EE
EE
EE
DD
B
A
B
Hardware Used
1/4” x 38 mm Bolt
Hex wrench
x 4
x 1
FF
CC
C
Hardware Used
M4 x 35 mm Screw x 10
BB
C
Hardware Used
M4 x 15 mm Bolt
Pole holder
x 2
x 2
DD
EE

5 6
ASSEMBLY INSTRUCTIONS
3. Attach pole holders (EE) to top frame (B), using
1/4” x 12 mm bolts (AA). Tighten with hex wrench (CC).
4. Attach top frame (B) to unit (Item #5120860 &
5120857, sold separately), using 1/4” x 38 mm bolt (FF).
Tighten with hex wrench (CC).
3
4
AA
EE
FF
CC
CC
B
B
Hardware Used
1/4” x 12 mm Bolt
Hex wrench
x 4
x 1
AA
CC
Hardware Used
1/4” x 38 mm Bolt
Hex wrench
x 4
x 1
FF
CC
CARE AND MAINTENANCE
LIMITED LIFETIME WARRANTY
This product is warranted to the original purchaser. If there is a failure in this unit due to defects in
materials or workmanship, the manufacturer will repair or replace this item at our discretion without
charge. Warranty is void if product has been assembled incorrectly, misused, abused by
overloading, altered in any way or damaged due to accident. This warranty is not transferable and
does not cover chipping, aking, scratches, rust, dents, or other damages to the surfaces of this
product. Responsibility of the manufacturer is limited to repair or replacement of this product. The
manufacturer is not responsible for consequential, incidental, or other damages or losses resulting
from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This warranty gives you specic legal rights and you may have other rights which vary from state
to state.
• Periodically check to make certain all components are properly positioned, free from damage
and rmly connected.
• Use a soft, clean cloth that will not scratch the surface when dusting.
• Never use water to clean the furniture as it may cause damage to the nish.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
• In the event that the furniture is stained or otherwise damaged during use, it is recommended
you call a professional to repair the furniture.
• Keep furniture away from direct sunlight as it may damage the nish.
• It is best to keep the furniture in a climate-controlled environment. Extreme temperature and
humidity changes can cause fading, warping, shrinking and splitting of wood.
PART DESCRIPTION PART #
A Shelf 00LWUSTCA-A
B Top frame 00LWUSTCA-B
C Metal pole 00LWUSTCA-C
AA 1/4” x 12 mm Bolt 00LWUSTCA-AA
BB M4 x 35 mm Screw 00LWUSTCA-BB
CC Hex wrench 00LWUSTCA-CC
DD M4 x 15 mm Bolt 00LWUSTCA-DD
EE Pole Holder 00LWUSTCA-EE
FF 1/4” x 38 mm Bolt 00LWUSTCA-FF
CH Complete hardware 00LWUSTCA-CH
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-888-8225,8 a.m. - 8 p.m., EST,
Monday - Sunday.
C
B
AAA BB CC DD
EE FF GG
Printed in Vietnam
Date: 2022-10-05
Rev. 0001-A