Sunjoy L-FT885PST User manual

Production Number：20181978 Made In China
Assembly Instruction
30 ’’ Slate Top Fire Fit
Model: L-FT885PST
SKU: 2595150
SAFETY INFORMATION:
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
WARNINGS:
FOR OUTDOOR USE ONLY! NEVER LEAVE FIRE UNATTENDED! Do not allow children or
pets near the fireplace without supervision. Do not use this fire pit to cook food. The fire pit is
not designed for cooking food.
CAUTIONS:
Burn only wood or charcoal in the fire pit. DO NOT use gasoline or kerosene to start the fire
in your fire pit. Use only an acceptable method of lighting the fire, such as match and lighter.
DO NOT use this unit on a wood deck or on combustible surfaces such as dry grass, leaves,
mulch, etc. The fireplace should be placed no closer than 5 feet from walls during use.
DO NOT attempt to move the fire pit while it is hot or in use.
PREPARATION:
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement.

Parts details
No.
Description
Qty
A
Handle
1
B
Lid
1
C
Log grate
1
D
Bowl
1
E
Table top
1
F
Fixed frame
1
G
feet
4
G1
Feet
pad(pre-attached)
4
H
Poker
1
AA
M6 nut
1
BB
M6*12 screw
4
CC
M6 nut
8
DD
M6 washer
12
EE
M6 wrench
1
Step 2: Put the base like below , connect feet(G)
with fixed frame (F) use the screw (BB) and washer
(DD)
Step 1: Fasten the handle (A) to lid (B) use nut
(AA)

Please do not return this product to the store. For technical assistance on
assembly or replacement parts call Sunjoy Industries at 1(866) 578-6569 anytime or Email
[e-mail] or visit www.sunjoyonline.com to place your order or fax your
parts replacement order form together with your purchase receipt to 1 [phone] for
assistance.
Step 3: Overturn the feet 180 degree like below
picture, fasten the screws (CC) to tabletop (E) with 8
nut (CC) and washer (DD).
Step 4: Overturn the tabletop 180 degree like
below picture, then put the lip (B), Log grate (C)
and bowl (D) to the tabletop (E). Put the poker (H)
aside to use.